Microstructure and homogenization process of as-cast GH4169D alloy for novel turbine disk

Abstract

To investigate the microstructure, segregation, and suitable homogenization process of as-cast GH4169D alloy, the microstructure, elements segregation, and precipitates of cast GH4169D ingots prepared by vacuum induction melting (VIM) and vacuum arc remelting (VAR) were observed by optical microscopy (OM), scanning electron microscopy, and energy-dispersive X-ray spectroscopy (EDS). According to the residual segregation model and simulation results of DICTRA thermodynamic software, the homogenization temperature and time range were set as 1120–1170°C and 5–20 h, respectively. The experimental results showed that microscopic dendrite and element segregation occurred in the interior of ingots and the main segregation elements were Nb and Ti. In addition, the precipitates were mainly distributed in interdendritic regions and were composed of NbC, Laves, γ′, and δ phases. The homogenization process suggested that the interdendritic detrimental precipitated Laves phase can be eliminated or redissolved after homogenization at 1150°C for 20 h, suggesting it was the most suitable homogenization treatment. Thermal compression test results showed that the GH4169D alloys after homogenization treatment had no cracks and dynamic recrystallization occurred, with recrystallization volume fraction increasing with temperature, indicating a good working plasticity at temperatures from 1050 to 1200°C.

Keywords

GH4169D superalloy / as-cast microstructure / segregation / homogenization / thermal deformation

References

[1] Wang ZL, Zheng ZT, Zhao LB, Lei YF, Yang K. Microstructure evolution and nucleation mechanism of Inco-nel 601H alloy welds by vibration-assisted GTAW. Int. J. Miner. Metall. Mater., 2018, 25, 788.

[2] Peng ZC, Tian GF, Jiang J, Li MZ, Yang C, Zou JW, Dunne FPE. Mechanistic behaviour and modelling of creep in powder metallurgy FGH96 nickel superalloy. Mater. Sci. Eng. A, 2016, 676, 441.

[3] Ren XP, Liu ZQ. Microstructure refinement and work hardening in a machined surface layer induced by turning In-conel 718 super alloy. Int. J. Miner. Metall. Mater., 2018, 25, 937.

[4] Cao WD, Kennedy R. Green KA, Pollock TM, Harada H, Howson TE, Reed RC, Schirra JJ, Walston S. Role of chemistry in 718-type alloys-Allvac^® 718Plus™ alloy development. Superalloys, 2004 91.

[5] Wang MQ, Du JH, Deng Q, Tian ZL, Zhu J. The effect of phosphorus on the microstructure and mechanical properties of ATI 718Plus alloy. Mater. Sci. Eng. A, 2015, 626, 382.

[6] Momeni A, Abbasi SM, Morakabati M, Badri H. A comparative study on the hot working behavior of inconel 718 and ALLVAC 718 plus. Metall. Mater. Trans. A, 2017, 48, 1216.

[7] Chen K, Dong JX, Yao ZH, Ni TW, Wang MQ. Creep performance and damage mechanism for Allvac 718Plus superalloy. Mater. Sci. Eng. A, 2018, 738, 308.

[8] Cao WD. Reed RC, Green KA, Caron P, Gabb TP, Fahrmann MG, Huron ES, Woodard SA. Thermal stability characterization of Ni-base ATI 718Plus^® superalloy. Superalloys, 2008 789.

[9] Whitmore L, Leitner H, Povoden-Karadeniz E, Radis R, Stockinger M. Transmission electron microscopy of single and double aged 718Plus superalloy. Mater. Sci. Eng. A, 2012, 534, 413.

[10] Eurich NC, Bristowe PD. Thermodynamic stability and electronic structure of η-Ni₆Nb(Al,Ti) from first principles. Scripta Mater., 2014, 77, 37.

[11] Zickler GA, Radis R, Schnitzer R, Kozeschnik E, Stockinger M, Leitner H. The precipitation behavior of su-peralloy ATI Allvac 718Plus. Adv. Eng. Mater., 2010, 12, 176.

[12] Hosseini SA, Madar KZ, Abbasi SM. Effect of ho-mogenization heat treatments on the cast structure and tensile properties of nickel-base superalloy ATI 718Plus in the presence of boron and zirconium additions. Mater. Sci. Eng. A, 2017, 689, 103.

[13] Cao GX, Zhang MC, Dong JX, Yao ZH, Zheng L. Effects of Nb content variations on precipitates evolution of GH4169 ingots during their solidification and homogeniza-tion processes. Rare Met. Mater. Eng., 2014, 43, 103.

[14] Semiatin SL, Kramb RC, Turner RE, Zhang F, Antony MM. Analysis of the homogenization of a nickel-base su-peralloy. Scripta Mater., 2004, 51, 491.

[15] Jiang H, Dong JX, Zhang MC, Yao ZH. Microstructure and homogenization of as-cast 617B alloy for 700°C ultra-supercritical boilers. J. Univ. Sci. Technol. Beijing, 2014, 36, 795.

[16] Wang J, Wu Y, Dong JX, Zhang MC, Xie XS, Xu FH. Microstructure and homogenization of as-cast GH4700 alloy for 700°C ultra-supercritical boilers. Rare Met. Mater. Eng., 2013, 42, 1908.

[17] Srinivasan D. Effect of long-time exposure on the evolution of minor phases in Alloy 718. Mater. Sci. Eng. A, 2004, 364, 27.

[18] Pickering EJ, Mathur H, Bhowmik A, Messé OMDM, Barnard JS, Hardy MC, Krakow R, Loehnert K, Stone HJ, Rae CMF. Grain-boundary precipitation in All-vac 718Plus. Acta Mater., 2012, 60, 2757.

[19] Gong L, Chen B, Du ZH, Zhang MS, Liu RC, Liu K. Investigation of solidification and segregation characteristics of cast Ni-base superalloy K417G. J. Mater. Sci. Technol., 2018, 34, 541.

[20] Zhang H, Liu Y, Chen X, Zhang HW, Li YX. Microstructural homogenization and high-temperature cyclic oxidation behavior of a Ni-based superalloy with high-Cr content. J. Alloys Compd., 2017, 727, 410.

[21] Hillert A. Diffusion and Thermodynamics of Alloys, 1984, Beijing, The Metallurgy Industry Press 32.

[22] Huang LJ, Qi F, Hua PT, Yu LX, Liu F, Sun WR, Hu ZQ. Discontinuous dynamic recrystallization of inconel 718 superalloy during the superplastic deformation. Metall. Mater. Trans. A., 2015, 46, 4276.

[23] Song M, Wen JF, Jiao Z, Was GS. Elastic strain energy control of the precipitate free zone around primary carbides in nickel base alloy 725. Acta Mater., 2016, 120, 138.