Effects of small additions of Zn on the microstructure, mechanical properties and corrosion resistance of WE43B Mg alloys

Abstract

Zn is a commonly used alloying element for Mg alloys owing to its beneficial effects on mechanical properties. To improve the mechanical and corrosion properties of WE43B Mg alloys, the effects of 0–0.7wt% Zn addition on the microstructure and properties of sample alloys were investigated. Addition of Zn to as-cast WE43B alloy promoted the formation of the Mg₁₂Nd phase; by contrast, after T6 heat treatment, the phase composition of WE43B alloys with and without Zn addition remained mostly the same. A long-period stacking ordered phase was predicted by CALPHAD calculation, but this phase was not observed in either the as-cast or heat-treated Zn-containing WE43B alloys. The optimum temperature and duration of T6 heat treatment were obtained using CALPHAD calculations and hardness measurements. Addition of Zn resulted in a slight reduction in the average grain size of the as-cast and T6 heat-treated WE43B alloys and endowed them with increased corrosion resistance with little effect on their mechanical properties.

Keywords

magnesium alloys / corrosion resistance / mechanical properties / Zn addition

References

[1] Polmear IJ. Magnesium alloys and applications. Mater. Sci. Technol., 1994, 10, 1.

[2] Mordike BL, Ebert T. Magnesium. Properties - applications - potential. Mater. Sci. Eng. A, 2001, 302, 37.

[3] Polmear IJ. Light Alloys: From Traditional Alloys to Nanocrystals, 2006, Oxford, Butterworth-Heinemann 241.

[4] Mukhina IY, Lebedev VM, Kim KH, Kim DK. Investigation of the microstructure and properties of castable neodymium-and yttrium-bearing magnesium alloys at elevated temperatures. Met. Sci. Heat Treat., 1997, 39, 202.

[5] Sha G, Li JH, Xu W, Xia K, Jie WQ, Ringer SP. Hardening and microstructural reactions in high-temperature equal-channel angular pressed Mg-Nd-Gd-Zn-Zr alloy. Mater. Sci. Eng. A, 2010, 527, 5092.

[6] Park BK, Jun JH, Kim JM. Influence of Zn addition on aging response and corrosion resistance of Mg-Gd-Nd-Zr alloy. Mater. Trans., 2008, 49, 931.

[7] Gavras S, Subroto T, Buzolin RH, Hort N, Tolnai D. The role of Zn additions on the microstructure and mechanical properties of Mg-Nd-Zn alloys. Int. J. Metalcast., 2018, 12, 428.

[8] Luo A, Pekguleryuz MO. Cast magnesium alloys for elevated temperature applications. J. Mater. Sci., 1994, 29, 5259.

[9] Bi GL, Li YD, Zang SJ, Zhang JB, Ma Y, Hao Y. Microstructure, mechanical and corrosion properties of Mg-2Dy-xZn (x=0, 0.1, 0.5 and 1at.%) alloys. J. Magnesium Alloys, 2014, 2, 64.

[10] Suzuki M, Kimura T, Koike J, Maruyama K. Effects of zinc on creep strength and deformation substructures in Mg-Y alloy. Mater. Sci. Eng. A, 2004, 387-389, 706.

[11] Kang YH, Wu D, Chen RS, Han EH. Microstructures and mechanical properties of the age hardened Mg-4.2Y-2.5Nd-1Gd-0.6Zr (WE43) microalloyed with Zn. J. Magnesium Alloys, 2014, 2, 109.

[12] Nishijima M, Hiraga K, Yamasaki M, Kawamura Y. The structure of Guinier-Preston zones in an Mg-2at% Gd-1at% Zn alloy studied by transmission electron microscopy. Mater. Trans., 2008, 49, 227.

[13] Li JH, Sha G, Schumacher P, Ringer SP. Precipitation process in Mg-Nd-Zn-Zr-Gd/Y alloy. Proc. Symp. Magnesium Technology, 2011 255.

[14] Yu XW, Jiang B, He JJ, Liu B, Jiang ZT, Pan FS. Effect of Zn addition on the oxidation property of Mg-Y alloy at high temperatures. J. Alloys Compd., 2016, 687, 252.

[15] Lyon P, Syed I, Boden AJ, Savage K. Magnesium Alloys Containing Rare Earths, 2009

[16] Schenkel JL. Anodized Magnesium or Magnesium Alloy Piston and Method for Manufacturing the Same, 2001

[17] Rokhlin LL. Magnesium Alloys Containing Rare Earth Metals: Structure and Properties, 2003, London, Taylor & Francis 32.

[18] Nie JF. Precipitation and hardening in magnesium alloys. Metall. Mater. Trans. A, 2012, 43, 3891.

[19] Xu GL, Zhang LG, Liu LB, Du Y, Zhang F, Xu K, Liu SH, Tan MY, Jin ZP. Thermodynamic database of multi-component Mg alloys and its application to solidification and heat treatment. J. Magnesium Alloys, 2016, 4, 249.

[20] Antion C, Donnadieu P, Perrard F, Deschamps A, Tassin C, Pisch A. Hardening precipitation in a Mg-4Y-3RE alloy. Acta Mater, 2003, 51, 5335.

[21] Wang ZQ, Zhang B, Li DJ, Fritzsch R, Zeng XQ, Roven HJ, Ding WJ. Effect of heat treatment on microstructures and mechanical properties of high vacuum die casting Mg-8Gd-3Y-0.4Zr magnesium alloy. Trans. Nonferrous Met. Soc. China, 2014, 24, 3762.

[22] Andersson JO, Helander T, Höglund L, Shi PF, Sundman B. Thermo-Calc and DICTRA, computational tools for materials science. CALPHAD, 2002, 26, 273.

[23] Scheil E. Bemerkungen zur schichtkristallbildung. Z. Metallkd., 1942, 34, 70.

[24] Thermo-Calc software TCAL4 Magnesium Alloys Database Version 4 [1 January 2018] https://www.thermocalc.com/media/19850/tcmg4_extended_info.pdf.

[25] Easton MA, StJohn DH. A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles. Acta Mater., 2001, 49, 1867.

[26] Quested TE, Dinsdale AT, Greer AL. Thermodynamic modelling of growth-restriction effects in aluminium alloys. Acta Mater., 2005, 53, 1323.

[27] Schmid-Fetzer R, Kozlov A. Thermodynamic aspects of grain growth restriction in multicomponent alloy solidification. Acta Mater., 2011, 59, 6133.

[28] Yamasaki M, Sasaki M, Nishijima M, Hiraga K, Kawamura Y. Formation of 14H long period stacking ordered structure and profuse stacking faults in Mg-Zn-Gd alloys during isothermal aging at high temperature. Acta Mater., 2007, 55, 6798.

[29] Zhu YM, Morton AJ, Nie JF. The 18R and 14H long-period stacking ordered structures in Mg-Y-Zn alloys. Acta Mater., 2010, 58, 2936.

[30] Zhang HH, Fan JF, Zhang L, Wu GH, Liu WC, Cui WD, Feng S. Effect of heat treatment on microstructure, mechanical properties and fracture behaviors of sand-cast Mg-4Y-3Nd-1Gd-0.2Zn-0.5Zr alloy. Mater. Sci. Eng. A, 2016, 677, 411.

[31] El Majid SA, Atiya G, Bamberger M, Katsman A. Nucleation and growth of metastable phases in Mg-Nd, Mg-Gd and Mg-Gd-Nd based alloys. Proc. Symp. Magnesium Technology 2014, 2014 179.

[32] Fu PH, Peng LM, Jiang HY, Chang JW, Zhai CQ. Effects of heat treatments on the microstructures and mechanical properties of Mg-3Nd-0.2Zn-0.4Zr (wt%) alloy. Mater. Sci. Eng. A, 2008, 486, 183.

[33] Ali Y, Qiu D, Jiang B, Pan FS, Zhang MX. Current research progress in grain refinement of cast magnesium alloys: A review article. J. Alloys Compd., 2015, 619, 639.

[34] Pan HC, Pan FS, Yang RM, Peng J, Zhao CY, She J, Gao ZY, Tang AT. Thermal and electrical conductivity of binary magnesium alloys. J. Mater. Sci., 2014, 49, 3107.

[35] Yamasaki M, Kawamura Y. Thermal diffusivity and thermal conductivity of Mg-Zn-rare earth element alloys with long-period stacking ordered phase. Scripta Mater., 2009, 60, 264.

[36] Song YW, Han EH, Shan DY, Yim CD, You BS. The effect of Zn concentration on the corrosion behavior of Mg-xZn alloys. Corros. Sci., 2012, 65, 322.

[37] Zhang EL, Yin DS, Xu LP, Yang L, Yang K. Microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-Mn alloys for biomedical application. Mater. Sci. Eng. C, 2009, 29, 987.

[38] Yan Y, Cao HW, Kang YJ, Yu K, Xiao T, Luo J, Deng YW, Fang HJ, Xiong HQ, Dai YL. Effects of Zn concentration and heat treatment on the microstructure, mechanical properties and corrosion behavior of as-extruded Mg-Zn alloys produced by powder metallurgy. J. Alloys Compd., 2017, 693, 1277.

[39] Hermawan H, Dubé D, Mantovani D. Developments in metallic biodegradable stents. Acta Biomater., 2010, 6, 1693.

[40] Lukyanova E, Anisimova N, Martynenko N, Kiselevsky M, Dobatkin S, Estrin Y. Features of in vitro and in vivo behaviour of magnesium alloy WE43. Mater. Lett., 2018, 215, 308.

[41] Lukyanova E, Anisimova N, Martynenko N, Kiselevsky M, Dobatkin S, Estrin Y. Features of in vitro and in vivo behaviour of magnesium alloy WE43. Mater. Lett., 2018, 215, 308.