Effects of postweld aging on the microstructure and properties of bobbin tool friction stir-welded 6082-T6 aluminum alloy

Abstract

Samples of 6082-T6 aluminum alloy were subjected to bobbin tool friction stir welding (BT-FSW), and the joints were treated by postweld natural aging (PWNA) and postweld artificial aging (PWAA). The microstructure, microhardness, and tensile properties of the aged and as-welded specimens were investigated. Transmission electron microscopy (TEM) observations revealed that a large number of Guinier-Preston (GP) zones precipitated in the form of a network on the stir zone (SZ) after PWNA for 60 d, and a large number of β″ phases precipitated in the matrix for after PWAA for 6 h. As the aging time increased, the microhardness of the SZ and the thermomechanically affected zone (TMAZ) increased significantly, and the hardness of the SZ after PWAA for 6 h was close to that of the base metal (BM). With increasing PWNA time, the strength and strain increased slightly. When the PWAA time increased, the strength clearly increased, with a maximum value of 279.9 MPa after 6 h, while the strain decreased.

Keywords

postweld aging / aluminum alloys / bobbin tool friction stir welding / microstructure / properties

References

[1] Mishtra RS, De PS, Kumar N. Friction Stir Welding and Processing, 2014, Switzerland, Springer International Publishing 109.

[2] Hovanski Y, Carsley JE, Clarke KD, Krajewski PE. Friction-stir welding and processing. JOM, 2015, 67, 996.

[3] Çam G, Mistikoğlu S. Recent developments in friction stir welding of Al-alloys. J. Mater. Eng. Perform., 2014, 23, 1936.

[4] Threadgill PL, Ahmed MMZ, Martin JP, Perrett JG, Wynne BP. The use of bobbin tools for friction stir welding of aluminum alloys. Mater. Sci. Forum., 2010, 638-642, 1179.

[5] Sued MK, Pons D, Lavroff J, Wong EH. Design features for bobbin friction stir welding tools: development of a conceptual model linking the underlying physics to the production process. Mater. Des., 2014, 54, 632.

[6] Xu WF, Luo YX, Zhang W, Fu MW. Comparative study on local and global mechanical properties of bobbin tool and conventional friction stir welded 7085-T7452 aluminum thick plate. J. Mater. Sci. Technol., 2018, 34, 173.

[7] Chen SJ, Li H, Lu S, Ni RY, Dong JH. Temperature measurement and control of bobbin tool friction stir welding. Int. J. Adv. Manuf. Technol., 2016, 86, 337.

[8] Wang FF, Li WY, Shen J, Wen Q, dos Santos JF. Improving weld formability by a novel dual-rotation bobbin tool friction stir welding. J. Mater. Sci. Technol., 2018, 34, 135.

[9] Shen JJ, Wang FF, Suhuddin UFH, Hu SY, Li WY, dos Santos JF. Crystallographic texture in bobbin tool friction stir welded aluminum. Metall Mater. Trans. A, 2015, 46, 2809.

[10] Wan L, Huang YX, Lv ZL, Lv SX, Feng JC. Effect of self-support friction stir welding on microstructure and microhardness of 6082-T6 aluminum alloy joint. Mater. Des., 2014, 55, 197.

[11] Zhang HJ, Wang M, Zhang X, Yang GX. Microstructural characteristics and mechanical properties of bobbin tool friction stir welded 2A14-T6 aluminum alloy. Mater. Des., 2015, 65, 559.

[12] Dong JH, Gao C, Lu Y, Han J, Jiao XD, Zhu ZX. Micro structural characteristics and mechanical properties of bobbin-tool friction stir welded 2024-T3 aluminum alloy. Int. J. Miner. Metall. Mater, 2017, 24, 171.

[13] Li JY, Zhou XP, Dong CL, Dong JH. Temperature fields in 6082 aluminum alloy samples bobbin-tool friction stir welded. J. Aeronaut. Mater., 2013, 33, 36.

[14] Liu XM, Yao JS, Cai Y, Meng H, Zou ZD. Simulation on the temperature field of bobbin tool friction stir welding of AA 2014 aluminium alloy. Appl. Mech. Mater, 2013, 433-435, 2091.

[15] Boonma J, Khammuangsa S, Uttarasak K, Dutchaneephet J, Boonruang C, Sirikulrat N. Post-weld heat treatment effects on hardness and impact strength of aluminum alloy 6061 friction stir butt weld. Mater. Trans., 2015, 56, 1072.

[16] İpekoğlu G, Erim S, Çam G. Investigation into the influence of post-weld heat treatment on the friction stir welded AA6061 al-alloy plates with different temper conditions. Metall. Mater. Trans. A, 2014, 45, 864.

[17] Zhang Z, Xiao BL, Ma ZY. Enhancing mechanical properties of friction stir welded 2219A1-T6 joints at high welding speed through water cooling and post-welding artificial ageing. Mater. Charact., 2015, 106, 255.

[18] Fu RD, Zhang JF, Li YJ, Kang J, Liu HJ, Zhang FC. Effect of welding heat input and post-welding natural aging on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy thin-sheet. Mater. Sci. Eng. A, 2013, 559, 319.

[19] ASTM E8/E8M-13a. Standard Test Methods for Tension Testing of Metallic Materials, 2013, West Conshohocken, ASTM International.

[20] Wang B. Study on Microstructures and Mechanical Properties of Friction Stir Welding Joints of 6082-T6 Aluminum Alloy, 2013 21.

[21] Sutton MA, Yang B, Reynolds AP, Taylor R. Microstructural studies of friction stir welds in 2024-T3 aluminum. Mater. Sci. Eng. A, 2002, 323, 160.

[22] Vissers R, van Huis MA, Jansen J, Zandbergen HW, Marioara CD, Andersen SJ. The crystal structure of the β'phase in Al-Mg-Si alloys. Acta Mater., 2007, 55, 3815.

[23] Marioara CD, Andersen SJ, Zandbergen HW, Holmestad R. The influence of alloy composition on precipitates of the Al-Mg-Si system. Metall. Mater. Trans. A, 2005, 36, 691.

[24] Cerri E, Leo P, Wang X, Embury JD. Mechanical properties and microstructural evolution of friction-stir-welded thin sheet aluminum alloys. Metall. Mater. Trans. A, 2011, 42, 1283.

[25] Yang WC, Wang MP, Sheng XF, Zhang Q, Wang ZA. Study of the aging precipitation and hardening behavior of 6005A alloy sheet for rail traffic vehicle. Acta Metall. Sin., 2010, 46, 1481.