Alkaline pressure oxidative leaching of bismuth-rich and arsenic-rich lead anode slime

Abstract

A new alkaline pressure oxidative leaching process (with NaNO₃ as the oxidant and NaOH as the alkaline reagent) is proposed herein to remove arsenic, antimony, and lead from bismuth-rich and arsenic-rich lead anode slime for bismuth, gold, and silver enrichment. The effects of the temperature, liquid-to-solid ratio, leaching time, and reagent concentration on the leaching ratios of arsenic, antimony, and lead were investigated to identify the optimum leaching conditions. The experimental results under optimized conditions indicate that the average leaching ratios of arsenic, antimony and lead are 95.36%, 79.98%, 63.08%, respectively. X-ray diffraction analysis indicated that the leaching residue is composed of Bi, Bi₂O₃, Pb₂Sb₂O₇, and trace amounts of NaSb(OH)₆. Arsenic, antimony, and lead are thus separated from lead anode slime as Na₃AsO₄· 10H₂O and Pb₂Sb₂O₇. Scanning electron microscopy and energy-dispersive spectrometry imaging revealed that the samples undergo appreciable changes in their surface morphology during leaching and that the majority of arsenic, lead, and antimony is removed. X-ray photoelectron spectroscopy was used to demonstrate the variation in the valence states of the arsenic, lead, and antimony. The Pb(IV) and Sb(V) content was found to increase substantially with the addition of NaNO₃.

Keywords

lead anode slime / pressure leaching / arsenic removal / antimony / bismuth

References

[1] Havuz T, Dönmez B, Çelik C. Optimization of removal of lead from bearing-lead anode slime. J. Ind. Eng. Chem., 2010, 16(3): 355.

[2] Li YH, Liu ZH, Li QH, Zhao ZW, Liu ZY, Zeng L. Removal of arsenic from Waelz zinc oxide using a mixed NaOH-Na₂S leach. Hydrometallurgy, 2011, 108(3–4): 165.

[3] Fernandez MA, Segarra M, Espiell F. Selective leaching of arsenic and antimony contained in the anode slimes from copper refining. Hydrometallurgy, 1996, 41(2–3): 255.

[4] Han JW, Liang C, Liu W, Qin WQ, Jiao F, Li WH. Pretreatment of tin anode slime using alkaline pressure oxidative leaching. Sep. Purif. Technol., 2017, 174, 389.

[5] Ludvigsson BM, Larsson SR. Anode slimes treatment: The Boliden experience. JOM, 2003, 55(4): 41.

[6] Li D, Guo XY, Xu ZP, Tian QH, Feng QM. Leaching behavior of metals from copper anode slime using an alkali fusion-leaching process. Hydrometallurgy, 2015, 157, 9.

[7] Lin DQ, Qiu KQ. Removing arsenic from anode slime by vacuum dynamic evaporation and vacuum dynamic flash reduction. Vacuum, 2012, 86(8): 1155.

[8] Li L, Tian Y, Liu DC, Zhou HJ, Dai YN, Yang B. Pretreatment of lead anode slime with low silver by vacuum distillation for concentrating silver. J. Cent. South Univ., 2013, 20(3): 615.

[9] Qiu KQ, Lin DQ, Yang XL. Vacuum evaporation technology for treating antimony-rich anode slime. JOM, 2012, 64(11): 1321.

[10] Kinoshita T, Akita S, Kobayashi N, Nii S, Kawaizumi F, Takahashi K. Metal recovery from non-mounted printed wiring boards via hydrometallurgical processing. Hydrometallurgy, 2003, 69(1–3): 73.

[11] Park KH, Kim HI, Parhi PK, Mishra D, Nam CW, Park JT, Kim DJ. Extraction of metals from Mo-Ni/Al₂O₃ spent catalyst using H₂SO₄ baking-leaching-solvent extraction technique. J. Ind. Eng. Chem., 2012, 18(6): 2036.

[12] Liu FP, Liu ZH, Li YH, Liu ZY, Li QH, Zeng L. Extraction of gallium and germanium from zinc refinery residues by pressure acid leaching. Hydrometallurgy, 2016, 164, 313.

[13] Xu B, Zhong H, Jiang T. Recovery of valuable metals from Gacun complex copper concentrate by two-stage countercurrent oxygen pressure acid leaching process. Miner., 2011, 24(10): 1082.

[14] Muszer A, Wôdka J, Chmielewski T, Matuska S. Co-vellinisation of copper sulfide minerals under pressure leaching conditions. Hydrometallurgy, 2013, 137(5): 1.

[15] Rodriguez MH, Rosales GD, Pinna EG, Suarez DS. Extraction of niobium and tantalum from ferrocolumbite by hydrofluoric acid pressure leaching. Hydrometallurgy, 2015, 156, 17.

[16] Swamy KM, Narayana KL. Intensification of leaching process by dual-frequency ultrasound. Ultrason. Sonochem., 2001, 8(4): 341.

[17] Ahmadi K, Abdollahzadeh Y, Asadollahzadeh M, Hemmati A, Tavakoli H, Torkaman R. Chemometric assisted ultrasound leaching-solid phase extraction followed by dispersive-solidification liquid-liquid microextraction fordetermination of organophosphorus pesticides in soil samples. Talanta, 2015, 137, 167.

[18] Yang XW. Handbook of Thermodynamic Data in Aqueous Solutions at High Temperature, 1983, Beijing, Metallurgical Industry Press 37.

[19] Pourbaix M. Atlas of Electrochemical Equilibria in Aqueous Solutions, 1974, Houston, National Association of Corrosion Engineers 489.

[20] Ammar IA, Saad A. Anodic oxide film on antimony: II. Parameters of film growth and dissolution kinetics in neutral and alkaline media. J. Electroanal. Chem. Interfacial Electrochem., 1972, 34(1): 159.

[21] Vojnović MV, Šepa DB. Charge transfer process Sb(III)/Sb(V) in alkaline media. J. Electroanal. Chem. Interfacial Electrochem, 1972, 39(2): 413.

[22] Y. Zhu, R.D. Xu, Y.L. He, N. Li, and S.Z. Chen, A Method for Separating Lead, Antimony and Arsenic from Anode Slime Alkaline Lixivium, Chinese Patent, Appl. 201611034010.2, 2017.

[23] Moulder JF, Stickle WF, Sobol PE, Bomben KD. Handbook of X-Ray Photoelectron Spectroscopy, 1995, Minnesota, Physical Electronics, Inc. 231.

[24] Santinacci L, Sproule GI, Moisa S, Landheer D, Wu XH, Banu A, Djenizian T, Schmuki P, Graham MJ. Growth and characterization of thin anodic oxide films on n-InSb(100) formed in aqueous solutions. Corros. Sci., 2004, 46(8): 2067.

[25] Darwiche A, Bodenes L, Madec L, Monconduit L, Martinez H. Impact of the salts and solvents on the SEI formation in Sb/Na batteries: An XPS analysis. Electrochim. Acta, 2016, 207, 284.

[26] Bodenes L, Darwiche A, Monconduit L, Martinez H. The solid electrolyte interphase a key parameter of the high performance of Sb in sodium-ion batteries: Comparative X-ray photoelectron spectroscopy study of Sb/Na-ion and Sb/Li-ion batteries. J. Power Sources, 2015, 273, 14.

[27] Bertrand PA. XPS study of chemically etched GaAs and InP. J. Vac. Sci. Technol., 1981, 18(1): 28.

[28] Li YH, Liu ZH, Li QH, Liu FP, Liu ZY. Alkaline oxidative pressure leaching of arsenic and antimony bearing dusts. Hydrometallurgy, 2016, 166, 41.

[29] Wikedzi A, Sandström Awe SA. Recovery of antimony compounds from alkaline sulfide leachates. Int. J. Miner. Process, 2016, 152, 26.