Factors influencing the pumpability of unclassified tailings slurry and its interval division

Abstract

Tailings consolidation and discharging technology is currently a popular means for disposing tailings in China. In this study, we describe a laboratory investigation of the unclassified tailings slurry from an iron mine and analyze the influence of the concentration, amount of consolidation agent, and types of consolidation agent on the pumpability in terms of the slump, slump flow, and bleeding rate of the slurry. The results indicate that an increase in concentration leads to a pronounced decrease in the magnitude of the slump, slump flow, and the bleeding rate. Compared with the consolidation agents P.O42.5 and P.S.A32.5, the new consolidation agent offers substantial advantages in promoting the pumping performance of the slurry. The concentration more strongly affects the slump, slump flow, and the bleeding rate of the slurry than does the amount of the consolidation agent. We also constructed the pumpability interval of the slurry on the basis of the slump and bleeding rate and accordingly determined the proportioning parameters of the slurry with a concentration of 75wt% to 79wt% and with a consolidation agent concentration of 2wt%. In addition, we discussed the pumpability mechanism of the slurry.

Keywords

tailings consolidation and discharging technology / unclassified tailings / new consolidation agent / pumpability interval / pumpa-bility mechanism

References

[1] Liu L, Fang ZY, Qi CC, Zhang B, Guo LJ, Song KIIL. Numerical study on the pipe flow characteristics of the cemented paste backfill slurry considering hydration effects. Powder Technol., 2019, 343, 454.

[2] Qi CC, Chen QS, Fourie A, Tang XL, Zhang QL, Dong XJ, Feng Y. Constitutive modelling of cemented paste backfill: A data-mining approach. Constr. Build. Mater., 2019, 197, 262.

[3] Men YS, Chai JS. The current safety situation of tailing reservoir in China and preventive measures. J. Saf. Sci. Technol., 2009, 5(1): 48.

[4] Yi ZL, Sun HH, Li C, Sun YM, Li Y. Relationship between polymerization degree and cementitious activity of iron ore tailings. Int. J. Miner. Metall. Mater., 2010, 17(1): 116.

[5] Yu GM, Song CW, Pan YZ, Li L, Li R, Lu SB. Review of new progress in tailing dam safety in foreign research and current state with development trend in China. Chin. J. Rock Mech. Eng., 2014, 33(S1): 3238.

[6] Hou YB, Tang J, Wei SX. Research on tailings’ cementation and discharging technology. Met. Mine, 2011, 6, 59.

[7] Hou YB, Lan SZ, Xu WB, Li P, Chen LL. Experimental study on settling characteristics of full tailings slurry mixed with cement based on orthogonal test. Met. Mine, 2015, 1, 25.

[8] Xu WB, Tian XC, Hou YB, Wei SX, Yue RF, Fan PF, Zhu ST, Yin TJ. Experimental study on the pore and strength properties of cemented unclassified during the consolidation process. J. China Univ. Min. Technol., 2016, 45(2): 272.

[9] Zhang XY, Qiao DP. Analysis of influencing factors on pumpability of cemented filling within Jinchuan No.2 mining area. Met. Mine, 2010, 9, 34.

[10] Atkins AS, Barkhordarian A, Singh RN, Zadeh AH. Pumpability of coal mine tailings for underground disposal and for regional support. Adv. Min. Sci. Technol., 1987, 2, 401.

[11] Wang HJ, Wang Y, Wu AX, Zhai YG, Jiao HZ. Research of paste new definition from the viewpoint of saturation ratio and bleeding rate. J. Wuhan Univ. Technol., 2011, 33(6): 85.

[12] Yu J, Yu HJ. Slurry pumpability of waste rock concrete pumping filling. Electron. J. Geotech. Eng., 2017, 22(2): 675.

[13] Yin GZ, Jing XF, Wei ZA, Li XS. Study of model test of seepage characteristics and field measurement of coarse and fine tailings dam. Chin. J. Rock Mech. Eng., 2010, 29(S2): 3710.

[14] Hou YB, Peng B, Wang BW, Liu HC, Wang YK, Shi SS. Study on settling performance of total tailings slurry mixed with cement in Xishimen iron mine. China Min. Mag., 2013, 22(11): 84.

[15] Sun DM, Ren JP, Jiao HZ, Hui L. Study on the properties of the unclassified tailings cemented backfill materials in a mine. Met. Mine, 2012, 3, 6.

[16] Zhang YQ, Huang SY. Pumpability analysis and evaluation index of concrete. China Concr. Cem. Prod., 1989, 3, 4.

[17] Pang LF, Yuan HX, Li ZM. Experimental study on pumpability of high performance concrete. Concrete, 1998, 2, 11.

[18] Yao ZL. Theory and practice in cemented filling with unclassified tailings structure fluid. Min. Res. Dev., 2006, S1, 15.

[19] Wang HJ, Wu AX, Chen J, Wang HW, Ji XW. Optimization of pumpability index of whole tailings-water quenched slag paste. Min. Technol., 2007, 7(3): 15.

[20] Yang N, Yin XG, Xiao ME, Zhong Y. A study on slump degree of a backfilling material pulp. Min. Metall., 2018, 27(3): 28.

[21] Yuan ZA, Wang HJ. Experimental research on the composite performances of paste backfill of a lead and zine mine. Non-ferrous Min. Metall., 2014, 30(1): 19.

[22] Xu WY, Guo LJ, Yang XC. Paste filling technology with optimization of different tailing grain compositions in Anqing copper mine. Met. Mine, 2018, 1, 16.

[23] Qi ZJ, Song ZP, Kou YP, Liu C, Jing XD, Yang JG. Experimental study on the whole tailings paste-like backfilling ratio in a mine. Metal Mine, 2018, 1, 68.

[24] Fu ZG, Guo ZL, Qiao DP. Calculation method of saturation ratio and bleeding rate of tailing paste. Min. Metall., 2018, 27(1): 21.

[25] An FB, Peng XC, Dong M. Concrete slump loss mechanism, influencing factors and control measures. China Build. Mater. Sci. Technol., 2010, 19(4): 29.

[26] Zhou YM. Research on the concrete gradual loss and slump control methods. Constr. Technol., 2009, 3, 105.

[27] C.G. Verkerk and R.D. Marcus, The pumping characteristics and rheology of paste fills, J. South. Afr. Inst. Min. Metall., 1988, p. 221.