Preparation of super-aligned carbon nanotube-reinforced nickel-matrix laminar composites with excellent mechanical properties

Abstract

A homogeneous and compact super-aligned carbon nanotube (SACNT)-reinforced nickel-matrix composite was successfully prepared by electrodeposition. The mechanical properties of the laminar SACNT/Ni composites were substantially improved compared with those of pure nickel. With increasing content of SACNTs, the tensile strength of the composite increased and the elongation decreased because of the high-strength SACNTs bearing part of an applied load and the fine-grained strengthening mechanism. The nanohardness of the SACNT/Ni composites was improved from 3.92 GPa (pure nickel) to 4.62 GPa (Ni−4vol%SACNTs). The uniform distribution of SACNTs in the composites and strong interfacial bonding between the SACNTs and the nickel matrix resulted in an improvement of the mechanical properties of the SACNT/Ni composites. The introduced SACNTs refined the nickel grains, increased the amount of crystal twins, and changed the preferred orientation of grain growth.

Keywords

nickel-matrix laminar composite / super-aligned carbon nanotube / electrodeposition / mechanical properties

References

[1] Bakshi S.R., Lahiri D., Agarwal A. Carbon nanotube reinforced metal matrix composites-a review. Int. Metall. Rev., 2010, 55(1): 41.

[2] Zapata-Solvas E., Gómez-García D., Domínguez-Rodríguez A. Towards physical properties tailoring of carbon nanotubes-reinforced ceramic matrix composites. J. Eur. Ceram. Soc., 2012, 32(12): 3001.

[3] Moniruzzaman M., Winey K.I. Polymer nanocomposites containing carbon nanotubes. Macromolecules, 2006, 39(16): 5194.

[4] Qin X.Y., Lee J.S., Nam J.G., Kim B.S. Synthesis and microstructureal characterization of nanostructured γ-Ni-Fe powder. Nanostruct. Mater., 1999, 11(3): 383.

[5] Chen C.Y., Chang J.K., Lin K.Y., Chung S.T., Tsai W.T. Enhanced hydrogen storage in MWCNTs decorated by electroless nickel nanoparticles deposited in supercritical CO2 bath. Mater. Sci. Forum, 2010, 638–642, 1148.

[6] Chen X.H., Li D.Y., Li X.Q., Zhang Z.H., Wang J.X., Li W.Z. Morphology and wear behavior of Ni-carbon nanotube composite coating. Tribology, 2002, 22(1): 6.

[7] Chen X.H., Chen C.S., Xiao H.N., Cheng F.Q., Zhang G., Yi G.J. Corrosion behavior of carbon nanotubes-Ni composite coating. Surf. Coat. Technol., 2003, 191(2–3): 351.

[8] Li X.W., Gu Y., Shi T., Peng D., Tang M.K., Zhang Q.X., Huang X.J. Preparation of the multi-walled carbon nanotubes/nickel composite coating with superior wear and corrosion resistance. J. Mater. Eng. Perform., 2015, 24(12): 4656.

[9] Bakshi S.R., Singh V., Seal S., Agarwal A. Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders. Surf. Coat. Technol., 2009, 203(10–11): 1544.

[10] Yang Z., Xu H., Shi Y.L., Li M.K., Huang Y., Li H.L. The fabrication and corrosion behavior of electroless Ni-P-carbon nanotube composite coatings. Mater. Res. Bull., 2005, 40(6): 1001.

[11] Arai S., Endo M., Kaneko N. Ni-deposited multi-walled carbon nanotubes by electrodeposition. Carbon, 2004, 42(3): 641.

[12] Xiong L.Q., Shuai J., Hou Z.C., Zhu L., Li W.Z. Functionalization of super-aligned carbon nanotube film using hydrogen peroxide solution and its application in copper electrodeposition. J. Colloid Interface Sci., 2017, 498, 405.

[13] Ang L.M., Hor T.S.A., Xu G.Q., Tung C.H., Zhao S.P., Wang J.L.S. Decoration of activated carbon nanotubes with copper and nickel. Carbon, 2000, 38(3): 363.

[14] Karslioglu R., Akbulut H. Comparison microstructure and sliding wear properties of nickel-cobalt/CNT composite coatings by DC, PC and PRC current electrodeposition. Appl. Surf. Sci., 2015, 353, 615.

[15] Guo C., Zuo Y., Zhao X.H., Zhao J.M., Xiong J.P. Effects of surfactants on electrodeposition of nickel-carbon nanotubes composite coatings. Surf. Coat. Technol., 2008, 202(14): 3385.

[16] Feng C., Liu K., Wu J.S., Liu L., Cheng J.S., Zhang Y.Y., Sun Y.H., Li Q.Q., Fan S.S., Jiang K.L. Flexible, stretchable, transparent conducting films made from superaligned carbon nanotubes. Adv. Funct. Mater., 2010, 20(6): 885.

[17] Liu K., Sun Y.H., Lin X.Y., Zhou R.F., Wang J.P., Fan S.S., Jiang K. Scratch-resistant, highly conductive, and high-strength carbon nanotube-based composite yarns. ACS Nano, 2010, 4(10): 5827.

[18] Cheng Q.F., Wang J.P., Wen J.J., Liu C.H., Jiang K.L., Li Q.Q., Fan S.S. Carbon nanotube/epoxy composites fabricated by resin transfer molding. Carbon, 2010, 48(1): 260.

[19] Jin Y., Zhu L., Xue W.D., Li W.Z. Fabrication of superaligned carbon nanotubes reinforced copper matrix laminar composite by electrodeposition. Trans. Nonferrous Met. Soc. China, 2015, 25(9): 2994.

[20] Shuai J., Xiong L.Q., Zhu L., Li W.Z. Enhanced strength and excellent transport properties of a super-aligned carbon nanotubes reinforced copper matrix laminar composite. Composites Part A, 2016, 88, 148.

[21] Ebrahimi F., Bourne G.R., Kelly M.S., Matthews T.E. Mechanical properties of nanocrystalline nickel produced by electrodeposition. Nanostruct. Mater., 1999, 11(3): 343.

[22] Cox H.L. The elasticity and strength of paper and other fibrous materials. Br. J. Appl. Phys., 1952, 3(3): 72.

[23] Cha S.I., Kim K.T., Arshad S.N., Mo C.B., Hong S.H. Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing. Adv. Mater., 2005, 17(11): 1377.

[24] Borkar T., Harimkar S. Microstructure and wear behavior of pulse electrodeposited Ni-CNT composite coatings. Surf. Eng., 2013, 27(7): 524.

[25] Hall E.O. The deformation and ageing of mild steel: III discussion of results. Proc. Phys. Soc. London Sect. B, 2002, 64(9): 495.

[26] Ryu H.J., Cha S.I., Hong S.H. Generalized shear-lag model for load transfer in SiC/Al metal-matrix composites. J. Mater. Res., 2003, 18(12): 2851.

[27] Thompson A.A.W. Yielding in nickel as a function of grain or cell size. Acta Metall., 1975, 23(11): 1337.

[28] Liu K., Sun Y.H., Liu P., Wang J.P., Li Q.Q., Fan S.S., Jiang K.L. Periodically striped films produced from super-aligned carbon nanotube arrays. Nanotechnology, 2009, 20(33): 335705.

[29] Erler F., Jakob C., Romanus H., Spiess L., Wielage B., Lampke T., Steinhäuser S. Interface behaviour in nickel composite coatings with nano-particles of oxidic ceramic. Electrochim. Acta, 2003, 48(20–22): 3063.