Enhanced electrochemical properties of LaFeO₃ with Ni modification for MH–Ni batteries

Abstract

In this work, we synthesized LaFeO₃–xwt%Ni (x = 0, 5, 10, 15) composites via a solid-state reaction method by adding Ni to the reactants, La₂O₃ and Fe₂O₃. Field-emission scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDS) results revealed that Ni powders evenly dispersed among the LaFeO₃ particles and apparently reduced their aggregation, which imparted the composites with a loose structure. Moreover, the Ni formed a conductive network, thus improving the conductivity of the composites. The maximum discharge capacity of the LaFeO₃ electrodes remarkably increased from 266.8 mAh·g^–1 (x = 0) to 339.7 mAh·g^–1 (x = 10). In particular, the high-rate dischargeability of the LaFeO₃–10wt%Ni electrode at a discharge current density of 1500 mA·g⁻¹ reached 54.6%, which was approximately 1.5 times higher than that of the pure LaFeO₃. Such a Ni-modified loose structure not only increased the charge transfer rate on the surface of the LaFeO₃ particles but also enhanced the hydrogen diffusion rate in the bulk LaFeO₃.

Keywords

LaFeO₃ / nickel modification / electrochemical performances / MH–Ni batteries

References

[1] Taniguchi A., Fujioka N., Ikoma M., Ohta A. Development of nickel/metal–hydride batteries for EVs and HEVs. J. Power Sources, 2001, 100(1–4): 117.

[2] Ye H., Huang Y.X., Chen J.X., Zhang H. MmNi3.55Co0.75Mn0.4Al0.3B0.3 hydrogen storage alloys for high–power nickel/metal hydride batteries. J. Power Sources, 2002, 103(2): 293.

[3] Köhler U., Kümpers J., Ullrich M. High performance nickel–metal hydride and lithium–ion batteries. J. Power Sources, 2002, 105(2): 139.

[4] Deng G., Chen Y.G., Tao M.D., Wu C.L., Shen X.Q., Yang H., Liu M. Electrochemical properties and hydrogen storage mechanism of perovskite–type oxide LaFeO3 as a negative electrode for Ni/MH batteries. Electrochim. Acta, 2010, 55(3): 1120.

[5] Xu J.J., Wang Z.L., Xu D., Meng F.Z., Zhang X.B. 3D ordered macroporous LaFeO3 as efficient electrocatalyst for Li–O2 batteries with enhanced rate capability and cyclic performance. Energy Environ. Sci., 2014

[6] Li M.M., Yang C.C., Wang C.C., Wen Z., Zhu Y.F., Zhao M., Li J.C., Zheng W.T., Lian J.S., Jiang Q. Design of hydrogen storage alloys/nanoporous metals hybrid electrodes for nickel–metal hydride batteries. Sci. Rep., 2016

[7] Wang Q., Deng G., Chen Z.Q., Chen Y.G., Cheng N.P. Electrochemical hydrogen property improved in nano–structured perovskite oxide LaFeO3 for Ni/MH battery. J. Appl. Phys., 2013, 113(5): 053305.

[8] Ren X., Yang H.T., Gen S., Zhou J., Yang T.Z., Zhang X.Q., Cheng Z.H., Sun S.H. Controlled growth of LaFeO3 nanoparticles on reduced graphene oxide for highly efficient photocatalysis. Nanoscale, 2016, 8(2): 752.

[9] Deng G., Chen Y.G., Tao M.D., Wu C.L., Shen X.Q., Yang H. Electrochemical properties of La1−xSrxFeO3 (x = 0.2, 0.4) as negative electrode of Ni–MH batteries. Electrochim. Acta, 2009, 54(15): 3910.

[10] Lim D.K., Im H.N., Singh B., Park C.J., Song S.J. Electrochemical hydrogen charge and discharge properties of La0.1Sr0.9Co1−yFeyO3−δ (y = 0, 0.2, 1) electrodes in alkaline electrolyte solution. Electrochim. Acta, 2013, 102, 393.

[11] Lim D.K., Im H.N., Kim J., Song S.J. Electrochemical properties of LaMO3 (M = Co or Fe) as the negative electrode in a hydrogen battery. J. Phys. Chem. Solids, 2013, 74(1): 115.

[12] Pei Y.R., Li Y., Che J.Y., Shen W.Z., Wang Y.C., Yang S.Q., Han S.M. Study on the high–temperature electrochemical performance of perovskite–type oxide LaFeO3 with carbon modification. Int. J. Hydrogen Energy, 2015, 40(28): 8742.

[13] Pei Y.R., Du W.K., Li Y., Shen W.Z., Wang Y.C., Yang S.Q., Han S.M. The effect of carbon–polyaniline hybrid coating on high–temperature electrochemical performance of perovskite–type oxide LaFeO3 for MH–Ni batteries. Phys. Chem. Chem. Phys., 2015, 17(27): 18185.

[14] Yuan Y.J., Dong Z.T., Li Y., Zhang L., Zhao Y.M., Wang B., Han S.M. Electrochemical properties of LaFeO3–rGO composite. Prog. Nat. Sci–Mater., 2017

[15] Ma Z.W., Zhou W.H., Wu C.L., Zhu D., Huang L.W., Wang Q.N., Tang Z.Y., Gui Y.G. Effects of size of nickel powder additive on the low–temperature electrochemical performances and kinetics parameters of AB5–type hydrogen storage alloy for negative electrode in Ni/MH battery. J. Alloys Compd., 2016, 660, 289.

[16] Kang Y.M., Kim K.T., Kim J.H., Kim H.S., Lee P.S., Lee J.Y., Liu H., Dou S.X. Electrochemical properties of Co3O4, Ni–Co3O4 mixture and Ni–Co3O4 composite as anode materials for Li ion secondary batteries. J. Power Sources, 2004

[17] Li M.H., Zhu Y.F., Yang C., Zhang J.G., Chen W., Li L.Q. Enhanced electrochemical hydrogen storage properties of Mg2NiH4 by coating with nano–nickel. Int. J. Hydrogen Energy, 2015, 40(40): 13949.

[18] Shen W.Z., Han S.M., Li Y., Yang S.Q., Miao Q. Effect of electroplating polyaniline on electrochemical kinetics of La–Mg–Ni–based hydrogen storage alloy. Appl. Surf. Sci., 2012, 258(17): 6316.

[19] Lin Z.K., Li S.F. Effects of nano nickel powders addition on flash pyrolysis of poly (ethylene glycol). Eur. Polym. J., 2008, 44(3): 645.

[20] Kuriyama N., Sakai T., Miyamura H., Uehara I., Ishikawa H., Iwasaki T. Electrochemical impedance and deterioration behavior of metal hydride electrodes. J. Alloys Compd., 1993, 202(1–2): 183.

[21] Wang Q., Chen Z.Q., Chen Y.G., Cheng N.P., Qun H. Hydrogen storage in perovskite–type oxides ABO3 for Ni/MH battery applications: a density functional investigation. Ind. Eng. Chem. Res., 2012, 51(37): 11821.