Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear

Abstract

The exceptional properties of graphene make it ideal as a reinforcement to enhance the properties of aluminum matrices and this critically depends on uniform dispersion. In this study, the dispersion issue was addressed by sonication and non-covalent surface functionalization of graphite nanoplatelets (GNPs) using two types of surfactant: anionic (sodium dodecyl benzene sulfate (SDBS)) and non-ionic polymeric (ethyl cellulose (EC)). After colloidal mixing with Al powder, consolidation was performed at two sintering temperatures (550 and 620°C). The structure, density, mechanical and wear properties of the nanocomposite samples were investigated and compared with a pure Al and a pure GNPs/Al nanocomposite sample. Noticeably, EC-based 0.5wt% GNPs/Al samples showed the highest increment of 31% increase in hardness with reduced wear rate of 98.25% at 620°C, while a 22% increase in hardness with reduced wear rate of 96.98% at 550°C was observed, as compared to pure Al. Microstructural analysis and the overall results validate the use of EC-based GNPs/Al nanocomposites as they performed better than pure Al and pure GNPs/Al nanocomposite at both sintering temperatures.

Keywords

graphite nanoplatelets (GNPs) / aluminum nanocomposites / surfactant / hardness / dispersion / ultra-sonication / sintering effects

References

[1] Dong Y., Umer R., Lau A.K.T. Fillers and Reinforcements for Advanced Nanocomposites, 2015, UK, Woodhead Publishing.

[2] Tjong S.C. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets. Mater. Sci. Eng. R, 2013, 74(10): 281.

[3] Rao C.N.R., Sood A.K. Graphene: Synthesis, Properties, and Phenomena, 2013, Germany, Wiley-VCH.

[4] Hu Z., Tong G., Lin D., Chen C., Guo H., Xu J., Zhou L. Graphene-reinforced metal matrix nanocomposites-a review. Mater. Sci. Technol., 2016, 32(9): 930.

[5] Prashantha Kumar H.G., Anthony Xavior M. Effect of graphene addition and tribological performance of Al 6061/graphene flake composite. Tribol. Mater. Surf. Interfaces, 2017, 11(2): 88.

[6] Nieto A., Bisht A., Lahiri D., Zhang C., Agarwal A. Graphene reinforced metal and ceramic matrix composites: a review. Int. Mater. Rev., 2017, 62(5): 241.

[7] Asgharzadeh H., Sedigh M. Synthesis and mechanical properties of Al matrix composites reinforced with few-layer graphene and graphene oxide. J. Alloys Compd., 2017, 728, 47.

[8] Baig Z., Mamat O., Mustapha M. Recent progress on the dispersion and the strengthening effect of carbon nanotubes and graphene-reinforced metal nanocomposites: a review. Crit. Rev. Solid State Mater. Sci., 2018, 43(1): 1.

[9] Chen B., Kondoh K. Sintering behaviors of carbon nanotubes -aluminum composite powders. Metals, 2016, 6(9): 213.

[10] Baig Z., Mamat O., Mustapha M., Mumtaz A., Sarfraz M., Haider S. An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behavior. Metals, 2018, 8(2): 90.

[11] Zhang H.P., Xu C., Xiao W.L., Ameyama K., Ma C.L. Enhanced mechanical properties of Al5083 alloy with graphene nanoplates prepared by ball milling and hot extrusion. Mater. Sci. Eng. A, 2016, 658, 8.

[12] Zeng X., Teng J., Yu J.G., Tan A.S., Fu D.F., Zhang H. Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy. Int. J.^Miner. Metall. Mater., 2018, 25(1): 102.

[13] Guardia L., Fernández-Merino M.J., Paredes J.I., Solis-Fernandez P., Villar-Rodil S., Martinez-Alonso A., Tascón J.M.D. High-throughput production of pristine graphene in an aqueous dispersion assisted by non-ionic surfactants. Carbon, 2011, 49(5): 1653.

[14] Georgakilas V., Otyepka M., Bourlinos A.B., Chandra V., Kim N., Kemp K.C., Hobza P., Zboril R., Kim K.S. Functionalization of graphene: covalent and non-covalent approaches, derivatives and applications. Chem. Rev., 2012, 112(11): 6156.

[15] Wei J.C., Inam F. Processing of epoxy/graphene nanocomposites: effects of surfactants. J. Polym. Sci. Appl., 2017, 1(1): 1.

[16] Tian W.M., Wang S.M. L. B., Chen X., Liu J.H., Yu M. Graphene-reinforced aluminum matrix composites prepared by spark plasma sintering. Int. J. Miner. Metall. Mater., 2016, 23(6): 723.

[17] Baig Z., Mamat O., Mustapha M., Sarfraz M. Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites. Fullerenes Nanotubes Carbon Nanostruct., 2017, 25(9): 545.

[18] Baig Z., Mamat O., Mustapha M., Mumtaz A., Munir K.S., Sarfraz M. Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrason. Sonochem., 2018, 45, 133.

[19] Mu X.N., Cai H.N., Zhang H.M., Fan Q.B., Zhang Z.H., Wu Y.X., Ge Y. X., Wang D.D. Interface evolution and superior tensile properties of multi-layer graphene reinforced pure Ti matrix composite. Mater. Des., 2017, 140, 431.

[20] Gao X., Yue H., Guo E., Zhang H., Lin X.Y., Yao L.H., Wang B. Preparation and tensile properties of homogeneously dispersed graphene reinforced aluminum matrix composites. Mater. Des., 2016, 94, 54.

[21] Pillari L.K., Shukla A.K., Murty S.V.S.N., Umasankar V. Processing and characterization of graphene and multi-wall carbon nanotube-reinforced aluminium alloy AA2219 composites processed by ball milling and vacuum hot pressing. Metall. Microst. Anal., 2017, 6(4): 289.

[22] Yang W.S., Chen G.Q., Qiao J., Liu S.F., Xiao R., Dong R.H., Hussain M., Wu G.H. Graphene nanoflakes reinforced Al-20Si matrix composites prepared by pressure infiltration method. Mater. Sci. Eng. A, 2017, 700, 351.

[23] Liu J.H., Khan U., Coleman J., Fernandez B., Rodriguez P., Naher S., Brabazon D. Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: powder synthesis and prepared composite characteristics. Mater. Des., 2016, 94, 87.

[24] Alam S.N., Kumar L. Mechanical properties of aluminium based metal matrix composites reinforced with graphite nanoplatelets. Mater. Sci. Eng. A, 2016, 667, 16.

[25] Pérez-Bustamante R., Bolaños-Morales D., Bonilla-Martínez J., Estrada-Guel I., Martínez-Sánchez R. Microstructural and hardness behavior of graphene-nanoplatelets/aluminum composites synthesized by mechanical alloying. J. Alloys. Compd., 2014, 615(1): S578.

[26] Baig Z., Mamat O., Mustapha M. Recent progress on the dispersion and the strengthening effect of carbon nanotubes and graphene reinforced metal nanocomposites: a review. Crit. Rev. Solid State Mater. Sci., 2018, 43(1): 1.

[27] Zhang Q., Qin Z.B., Luo Q., Wu Z., Liu L.L., Shen B., Hu W.B. Microstructure and nanoindentation behavior of Cu composites reinforced with graphene nanoplatelets by electroless co-deposition technique. Sci. Rep., 2017, 7, 1338.

[28] Saboori A., Pavese M., Badini C., Fino P. Development of Al-and Cu-based nanocomposites reinforced by graphene nanoplatelets: fabrication and characterization. Front. Mater. Sci., 2017, 11(2): 171.

[29] Hidalgo-Manrique P., Yan S.J., Lin F., Hong Q.H., Kinloch I.A., Chen X., Young R.J., Zhang X.Y., Dai S.L. Microstructure and mechanical behavior of aluminium matrix composites reinforced with graphene oxide and carbon nanotubes. J.^Mater. Sci., 2017, 52(23): 13466.

[30] Li D.S., Ye Y., Liao X.J., Qin Q.H. A novel method for preparing and characterizing graphene nanoplatelets/aluminum nanocomposites. Nano Res., 2018, 11(3): 1642.

[31] Kostecki M., Woźniak J., Cygan T., Petrus M., Olszyna A. Tribological properties of aluminium alloy composites reinforced with multi-layer graphene—The influence of spark plasma texturing process. Materials, 2017, 10(8): 928.