Comparison of selective flocculation of low grade goethitic iron ore fines using natural and synthetic polymers and a graft copolymer

Abstract

This study aims to beneficiate low grade goethitic iron ore fines using a selective flocculation process. Selective flocculation studies were conducted using different polymers such as starch amylopectin (AP), poly acrylic acid (PAA), and a graft copolymer (AP-g-PAA). The obtained results were analyzed; they indicate the enhancement of the iron ore grade from 58.49% to 67.52% using AP-g-PAA with a recovery of 95.08%. In addition, 64.45% Fe with a recovery of 88.79% was obtained using AP. Similarly, using PAA, the grade increased to 63.46% Fe with a recovery of 82.10%. The findings are also supported by characterizing concentrates using X-ray diffraction (XRD) and electron probe microanalysis (EPMA) techniques.

Keywords

low grade iron ore fines / selective flocculation / graft copolymer / amylopectin (AP) / poly acrylic acid (PAA)

References

[1] Araujo A.C., Viana P.R.M., Peres A.E.C. Reagents in iron ores flotation. Miner. Eng., 2005, 18(2): 219.

[2] Ma M. Froth flotation of iron ores. Int. J. Min. Eng. Miner. Process., 2012, 1(2): 56.

[3] Dworzanowski M. Maximizing the recovery of fine iron ore using magnetic separation. J. South Afr. Inst. Min. Metall., 2012, 112(3): 197.

[4] Roy S. Recovery improvement of fine iron ore particles by multi gravity separation. Open Miner. Process. J., 2009, 2, 17.

[5] Pradip P. Beneficiation of alumina rich Indian iron ore slimes. Met. Mater. Processes, 1994, 6(3): 179.

[6] Mandre N.R. Selective flocculation of low-grade iron ore fines. XXVI International Mineral Processing Congress, New Delhi, 2012 3220.

[7] Filippov L.O., Severov V.V., Filippova I.V. Mechanism of starch adsorption on Fe–Mg–Al-bearing amphiboles. Int. J. Miner. Process., 2013, 123(6): 120.

[8] Panda L., Biswal S.K., Tathavadkar V. Beneficiation of synthetic iron ore kaolinite mixture using selective flocculation. J. Miner. Mater. Charact. Eng., 2010, 9(11): 973.

[9] Dash M., Dwari R.K., Biswal S.K., Reddy P.S.R., Chattopadhyay P., Mishra B.K. Studies on the effect of flocculant adsorption on the dewatering of iron ore tailings. Chem. Eng. J., 2011, 173(2): 318.

[10] Kumar R., Mandre N.R. Characterization and beneficiation of iron ore tailings by selective flocculation. Trans. Indian Inst. Met., 2016, 69(7): 1459.

[11] Ravishankar S.A., Pradip Khosla N.K. Selective flocculation of iron oxide from its synthetic mixtures with clays: a comparison of polyacrylic acid and starch polymers, Int. J. Miner. Process., 1995, 43(3-4): 235.

[12] Mathur S., Singh P., Moudgil B.M. Advances in selective flocculation technology for solid-solid separations. Int. J. Miner. Process., 2000, 58(1-4): 201.

[13] Schintu M., Meloni P., Contu A. Aluminum fractions in drinking water from reservoirs. Ecotoxicol. Environ. Saf., 2000, 46(1): 29.

[14] Xiao J., Zhou Q. Natural Polymer Flocculants, 2005

[15] Sarkar A.K., Mandre N.R., Panda A.B., Pal S. Amylopectin graft with poly (acrylic acid): Development and application of a high performance flocculant. Carbohydr. Polym., 2013, 95(2): 753.

[16] Talmage W.P., Fitch E.B. Determining thickener unit areas. Ind. Eng. Chem., 1955, 47(1): 38.

[17] Mandre N.R., Panigrahi D. Studies on selective flocculation of complex sulphides using cellulose xanthate. Int. J. Miner. Process., 1997, 50(3): 177.