Novel mechanism for the modification of Al₂O₃-based inclusions in ultra-low carbon Al-killed steel considering the effects of magnesium and calcium

Abstract

Many researchers have explored the inclusion modification mechanism to improve non-metallic inclusion modifications in steelmaking. In this study, two types of industrial trials on inclusion modifications in liquid steel were conducted using ultra-low-carbon Al-killed steel with different Mg and Ca contents to verify the effects of Ca and Mg contents on the modification mechanism of Al₂O₃-based inclusions during secondary refining. The results showed that Al₂O₃-based inclusions can be modified into liquid calcium aluminate or a multi-component inclusion with the addition of a suitable amount of Ca. In addition, [Mg] in liquid steel can further reduce CaO in liquid calcium aluminate to drive its evolution into CaO–MgO–Al₂O₃ multi-component inclusions. Thermodynamic analysis confirmed that the reaction between [Mg] and CaO in liquid calcium aluminate occurs when the MgO content of liquid calcium aluminate is less than 3wt% and the temperature is higher than 1843 K.

Keywords

inclusions / mechanism / modification / ultra-low carbon Al-killed steel / calcium treatment / magnesium content

References

[1] Ye G., Jönsson P., Lund T. Thermodynamics and kinetics of the modification of Al₂O₃ inclusions. ISIJ Int., 1996, 36, S105.

[2] Deng Z.Y., Zhu M.Y. A new double calcium treatment method for clean steel refining. Steel Res. Int., 2013, 84(6): 519.

[3] Jiang M., Wang X.H., Cheng B., Wang W.J. Laboratory study on evolution mechanisms of non-metallic inclusions in high strength alloyed steel refined by high basicity slag. ISIJ Int., 2010, 50(1): 95.

[4] Yang S.F., Wang Q.Q., Zhang L.F., Li J.S., Peaslee K. Formation and modification of MgO·Al₂O₃-based inclusions in alloy steels. Metall. Mater. Trans. B, 2012, 43(4): 731.

[5] Deng Z.Y., Zhu M.Y. Evolution mechanism of non-metallic inclusions in Al-killed alloyed steel during secondary refining process. ISIJ Int., 2013, 53(3): 450.

[6] Guo J., Cheng S.S., Cheng Z.J., Xin L. Thermodynamics for precipitation of CaS bearing inclusion and their deformation during rolling process for Al-killed Ca-treated steel. Steel Res. Int., 2013, 84(6): 545.

[7] Guo J., Cheng S.S., Cheng Z.J. Mechanism of non-metallic inclusion formation and modification and their deformation during CSP^process for aluminum-killed steel. ISIJ Int., 2013, 53(12): 2142.

[8] Zhang T.S., Min Y., Liu C.J., Jiang M.F. Effect of Mg addition on the evolution of inclusions in Al–Ca deoxidized melts. ISIJ Int., 2015, 55(8): 1541.

[9] Ma W.J., Bao Y.P., Wang M., Zhao L.H. Effect of Mg and Ca treatment on behavior and particle size of inclusions in bearing steels. ISIJ Int., 2014, 54(3): 536.

[10] Martín A., Brandaleze E., Madías J., Donayo R., Gómez A., Pérez J. Study about downgrading variables by inclusionary cleanliness in the laddle furnace at Ternium Siderar. Proceedings of the 7th International Conference of Clean Steel, 2007 203.

[11] Dogan N., Longbottom R.J., Reid M.H., Chapman M.W., Wilson P., Moore L., Monaghan B.J. Morphology and composition changes of spinel (MgAl₂O₄) inclusions in steel. Ironmaking Steelmaking, 2015, 42(3): 185.

[12] Seo W.G., Han W.H., Kim J.S., Park J.J. Deoxidation equilibria among Mg, Al and O in liquid iron in the presence of MgO Al₂O₃ spinel. ISIJ Int., 2003, 43(2): 201.

[13] Kim J.W., Kim S.K., Kim D.S., Lee Y.D., Yang P.K. Formation mechanism of Ca-Si-Al-Mg-Ti-O^inclusions in type 304 stainless steel. ISIJ Int., 1996, 36, S140.

[14] Cha W.Y., Kim D.S., Lee Y.D., Park J.J. A thermodynamic study on the inclusions formation in ferritic stainless steel melt. ISIJ Int., 2004, 44(7): 1134.

[15] Park J.H. Formation mechanism of spinel-type inclusions in high-alloyed stainless steel melts. Metall. Mater. Trans. B, 2007, 38(4): 657.

[16] Ehara Y., Yokoyama S., Kawakami M. Formation mechanism of inclusions containing MgO-Al₂O₃ spinet in type 304 stainless steel. Tetsu-to-Hagane, 2007, 93(3): 208.

[17] Ehara Y., Yokoyama S., Kawakami M. Control of formation of spinel inclusion in type 304 stainless steel by slag composition. Tetsu-to-Hagane, 2007, 93(7): 475.

[18] Suito H., Inoue R. Thermodynamics on control of inclusions composition in ultra-clean steels. ISIJ^Int., 1996, 36(5): 528.

[19] Nybakken J.W. Steelmaking Data Sourcebook, Edited by the Japan Society for the Promotion of Science, 1987, New York, Gordon & Breach Science Publishers 142.

[20] Guo J., Cheng S.S., Cheng Z.J. Characteristics of deoxidation and desulfurization during LF refining Al-killed steel by highly basic and low oxidizing slag. J. Iron. Steel Res. Int., 2014, 21(2): 166.