Influence of sintering temperature on the phases and photoelectric characteristics of BiOCl/ZnO composite powders

Song Chen , De-gui Zhu

International Journal of Minerals, Metallurgy, and Materials ›› 2017, Vol. 24 ›› Issue (12) : 1438 -1447.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2017, Vol. 24 ›› Issue (12) : 1438 -1447. DOI: 10.1007/s12613-017-1537-8
Article

Influence of sintering temperature on the phases and photoelectric characteristics of BiOCl/ZnO composite powders

Author information +
History +
PDF

Abstract

Zinc oxide is a typical functional oxide that has been widely researched for various industry applications due to its peculiar physical characteristics. However, to achieve its potential in promising applications, much work has been diligently performed to improve the physical properties of ZnO. In this work, an aqueous suspension route was used to prepare BiOCl/ZnO composite powders, and sintering processes were applied to investigate the influence of sintering temperature on the phase evolutions, microstructures, and photoelectric characteristics of BiOCl/ZnO composite powders. The results indicated that the photoelectric properties mainly depend on the relevant content of BiOCl in the composite powders and the sintering temperature. The photoelectric measurements in K2SO4 solutions show that the photoelectric properties of the samples with the appropriate BiOCl content (0.3mol% and 2.0mol%) are better than those of ZnO and commercial TiO2 (P25) powders, but the photoelectric measurements in NaOH solutions indicate that the photoelectric characteristics of the as-sintered samples are only better than those of P25.

Keywords

ZnO/BiOCl composites / sintering temperature / microstructures / photoelectric characteristics

Cite this article

Download citation ▾
Song Chen, De-gui Zhu. Influence of sintering temperature on the phases and photoelectric characteristics of BiOCl/ZnO composite powders. International Journal of Minerals, Metallurgy, and Materials, 2017, 24(12): 1438-1447 DOI:10.1007/s12613-017-1537-8

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Liu J., Hu Z.Y., Peng Y., Huang H.W., Li Y., Wu M., Ke X.X., Tendeloo G.V., Su B.L. 2D ZnO mesoporous single-crystal nanosheets with exposed {0001} polar facets for the depollution of cationic dye molecules by highly selective adsorption and photocatalytic decomposition. Appl. Catal. B, 2016, 181, 138.

[2]

Rehman S., Ullah R., Butt A.M., Gohar N.D. Strategies of making TiO2 and ZnO visible light active. J. Hazard. Mater., 2009, 170(2-3): 560.

[3]

Triboulet R. Growth of ZnO bulk crystals: A review. Prog. Cryst. Growth Charact. Mater., 2014, 60(1): 1.

[4]

Shingange K., Tshabalala Z.P., Ntwaeaborwa O.M., Motaung D.E., Mhlongo G.H. Highly selective NH3 gas sensor based on Au loaded ZnO nanostructures prepared using microwave-assisted method. J. Colloid Interface Sci., 2016, 479, 127.

[5]

Rekha V., Sumana C., Douglas S.P., Lingaiah N. Understanding the role of Co–ZnO mixed oxide catalysts for the selective hydrogenolysis of glycerol. Appl. Catal. A, 2015, 491, 155.

[6]

Podporska-Carroll J., Myles A., Quilty B., McCormack D.E., Fagan R., Hinder S.J., Dionysiou D.D., Pillai S.C. Antibacterial properties of F-doped ZnO visible light photocatalyst. J. Hazard. Mater., 2017, 324, 39.

[7]

Güy N., Çakar S., özacar M. Comparison of palladium-zinc oxide photocatalysts prepared by different palladium doping methods for congo red degradation. J.^Colloid Interface Sci., 2016, 466, 128.

[8]

Song J.L., Fan Q.N., Zhu W.H., Wang R.F., Dong Z.P. Preparation of BiOCl with high specific surface area and excellent visible light photocatalytic activity. Mater. Lett., 2016, 165, 14.

[9]

Li Y.F., Zhang M., Guo D.L., He F.X., Li Y.Z., Wang A.J. Facile solvothermal synthesis of BiOCl/ZnO heterostructures with enhanced photocatalytic activity. J. Nanomater., 2014

[10]

Hao H.Y., Xu Y.Y., Liu P., Zhang G.Y. BiOCl nanostructures with different morphologies: Tunable synthesis and visible-light-driven photocatalytic properties. Chin. Chem. Lett., 2015, 26(1): 133.

[11]

Xie T.P., Xu L.J., Liu C.L., Yang J., Wang M. Magnetic composite BiOCl–SrFe12O19: a novel p–n type heterojunction with enhanced photocatalytic activity. Dalton Trans., 2014, 43(5): 2211.

[12]

Zhang S.Z., Ding F., Luo X.G., Lin X.Y. Facile synthesis of hierarchical Mo-doped S/BiOCl heterostructured spheres and its excellent photo/thermocatalytic activity under near room temperature. J. Alloys Compd., 2016, 673, 93.

[13]

Chen D.L., Zhang M., Lu Q.J., Chen J.F., Liu B.T., Wang Z.F. Facile synthesis of Bi/BiOCl composite with selective photocatalytic properties. J. Alloys Compd., 2015, 646, 647.

[14]

Thejaswini T.V.L., Prabhakaran D., Maheswari M.A. Ultrasound assisted synthesis of nano-rod embedded petal designed α-Bi2O3-ZnO nanoparticles and their ultra-responsive visible light induced photocatalytic properties. J. Photochem. Photobiol. A, 2017, 335, 217.

[15]

Chouikh F., Beggah Y., Tabet N., Ariche N., Aida M.S. Highly oriented and conducting Bi doped ZnO (BZO) layers chemically sprayed using nitrogen gas carrier. Mater. Sci. Semicond. Process., 2017, 64, 39.

AI Summary AI Mindmap
PDF

93

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/