Study on the separation process of non-metallic inclusions at the steel−slag interface using water modeling

Abstract

The separation process of non-metallic inclusions at the steel–slag interface was simulated by physical modeling. Three different kinds of particles (octahedral, plate-like, and spherical) and three different oils (kerosene, bean oil, and pump oil) were used to model inclusions and slags, respectively. The effects of inclusion geometry (shape and size) and slag properties (viscosity and interfacial tension) on the separation process were investigated. The results revealed that the variation of surface free energy and the viscosity of the slag are two significant factors affecting the separation process of inclusions at the steel–slag interface. The variation of surface free energy helped inclusions enter the slag phase, whereas the decrease of slag viscosity shortened the separation time. The deformation of the steel–slag interface could give rise to the resistance force, which would resist inclusions passing through the interface. A liquid film formed on the inclusion as it passed through the steel–slag interface, which might be related to the inclusion’s shape.

Keywords

physical modeling / non-metallic inclusions / slag / separation / interfaces

References

[1] Lou W.T., Zhu M.Y. Numerical simulations of inclusion behavior in gas-stirred ladles. Metall. Mater. Trans. B, 2013, 44(3): 762.

[2] Ling H.T., Zhang L.F., Li H. Mathematical modeling on the growth and removal of non-metallic inclusions in the molten steel in a two-strand continuous casting tundish. Metall. Mater. Trans. B, 2016, 47(5): 2991.

[3] Xue Z.L., Wang Y.F., Wang L.T., Li Z.B., Zhang J.W. Inclusion removal from molten steel by attachment small bubbles. Acta Metall. Sin., 2003, 39(4): 431.

[4] Yang H.L., He P., Zhai Y.C. Removal behavior of inclusions in molten steel by bubble wake flow based on water model experiment. ISIJ Int., 2014, 54(3): 578.

[5] Michelic S., Goriupp J., Feichtinger S., Kang Y.B., Bernhard C., Schenk J. Study on oxide inclusion dissolution in secondary steelmaking slags using high temperature confocal scanning laser microscopy. Steel Res. Int., 2016, 87(1): 57.

[6] Monaghan B.J., Chen L. Effect of changing slag composition on spinel inclusion dissolution. Ironmaking Steelmaking, 2006, 33(4): 323.

[7] Feichtinger S., Michelic S.K., Kang Y.B., Bernhard C. In situ observation of the dissolution of SiO₂ particles in CaO-Al₂O₃-SiO₂ slags and mathematical analysis of its dissolution pattern. J. Am. Ceram. Soc., 2014, 97(1): 316.

[8] Yang G.W., Wang X.H., Huang F.X., Wang W.J., Yin Y.Q. Transient inclusion evolution during RH degassing. Steel Res. Int., 2014, 85(1): 26.

[9] Li J.Z., Jiang M., He X.F., Sun W., Wang X.H. Investigation on nonmetallic inclusions in ultra-low-oxygen special steels. Metall. Mater. Trans. B, 2016, 47(4): 2386.

[10] Misra P., Chevrier V., Sridhar S., Cramb A.W. In situ observations of inclusions at the (Mn,Si)-killed steel/CaO-Al₂O₃ interface. Metall. Mater. Trans. B, 2000, 31(5): 1135.

[11] Vantilt S., Coletti B., Blanpain B., Fransaer J., Wollants P., Sridhar S. Observation of inclusions in manganese-silicon killed steels at steel–gas and steel–slag interfaces. ISIJ Int., 2004, 44(1): 1.

[12] Lee S.H., Tse C., Yi K.W., Misra P., Chevrier V., Orrling C., Sridhar S., Cramb A.W. Separation and dissolution of Al₂O₃ inclusions at slag/metal interfaces. J. Non Cryst. Solids, 2001, 282(1): 41.

[13] Bouris D., Bergeles G. Investigation of inclusion re-entrainment from the steel-slag interface. Metall. Mater. Trans. B, 1998, 29(3): 641.

[14] Strandh J., Nakajima K., Eriksson R., Jönsson P. A mathematical model to study liquid inclusion behavior at the steel–slag interface. ISIJ Int., 2005, 45(12): 1838.

[15] Strandh J., Nakajima K., Eriksson R., Jönsson P. Solid inclusion transfer at a steel–slag interface with focus on tundish conditions. ISIJ Int., 2005, 45(11): 1597.

[16] Valdez M., Shannon G.S., Sridhar S. The ability of slags to absorb solid oxide inclusions. ISIJ Int., 2006, 46(3): 450.

[17] Yang S.F., Li J.S., Liu C., Sun Y.H., Yang H.B. Motion behavior of nonmetal inclusions at the interface of steel and slag: Part II. Model application and discussion. Metall. Mater. Trans. B, 2014, 45(6): 2453.

[18] Shannon G.N., Sridhar S. Modeling Al₂O₃ inclusion separation across steel-slag interfaces. Scand. J. Metall., 2005, 34(6): 353.

[19] Liu C., Yang S.F., Li J.S., Zhu L.B., Li X.G. Motion behavior of nonmetallic inclusions at the interface of steel and slag: Part I. Model development, validation, and preliminary analysis. Metall. Mater. Trans. B, 2016, 47(3): 1882.

[20] Hong S., Kim W. Dynamics of water imbibition through paper channels with wax boundaries. Microfluid. Nanofluid., 2015, 19(4): 845.

[21] Nakajima K., Okamura K. Inclusion transfer behavior across molten steel-slag interfaces. The 4th International Conference on Molten Slags and Fluxes, 1992 505.

[22] Loth E. Drag of non-spherical solid particles of regular and irregular shape. Powder Technol., 2008, 182(3): 342.

[23] Haider A., Levenspiel O. Drag coefficient and terminal velocity of spherical and nonspherical particles. Powder Technol., 1989, 58(1): 63.

[24] Li E.Q., Vakarelski I.U., Chan D.Y.C., Thoroddsen S.T. Stabilization of thin liquid films by repulsive van der Waals force. Langmuir, 2014, 30(18): 5162.