Surface grain refinement mechanism of SMA490BW steel cross joints by ultrasonic impact treatment

Abstract

Ultrasonic impact treatment (UIT) is a postweld technique for improving the fatigue strength of welded joints. This technique makes use of ultrasonic vibration to impact and plastically deform a weld toe and can achieve surface grain refinement of the weld toe, which is considered as the main reason for the improvement of fatigue strength. In this paper, the microstructure of the surface of a treated weld toe was observed by metallographic microscopy and transmission electron microscopy (TEM). The results show that UIT could produce severe plastic deformation on the surface layer of the weld toe and the maximum depth of plastic deformation extended to approximately 260 μm beneath the treated surface. Repeated processing could exacerbate the plastic deformation on the surface layer, resulting in finer grains. We can conclude that the surface grain refinement mechanism of SMA490BW welded joints is related to the high density of dislocation tangles and dislocation walls.

Keywords

weathering steel / welding ultrasonic impact treatment / plastic deformation / joints / grain refinement

References

[1] Peng D., Shen J., Tang Q., Wu C.P., Zhou Y.B. Effects of aging treatment and heat input on the microstructures and mechanical properties of TIG-welded 6061-T6 alloy joints. Int. J. Miner. Metall. Mater., 2013, 20(3): 259.

[2] Chu Y.J., Chen J., Li X.Q., Wu S.Q., Yang Z.H. Effects of thermomechanical treatments on the microstructures and mechanical properties of GTA-welded AZ31B magnesium alloy. Int. J. Miner. Metall. Mater., 2012, 19(10): 945.

[3] Huo L.X. The Fracture Behavior of Welded Structure and Evaluation, 2000, Beijing, China Machine Press

[4] Tian X.D. Welding Structure, 1981, Beijing, China Machine Press

[5] Mordyuk B.N., Prokopenko G.I., Vasylyev M.A., Iefimovb M.O. Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel. Mater. Sci. Eng. A, 2007, 458(1-2): 253.

[6] Yin D.Q., Wang D.P., Jing H.Y., Huo L.X. The effects of ultrasonic peening treatment on the ultra-long life fatigue behavior of welded joints. Mater. Des., 2010, 31(7): 3299.

[7] Mordyuk B.N., Prokopenko G.I. Ultrasonic impact peening for the surface properties’ management. J. Sound Vib., 2007, 308(3-5): 855.

[8] Vasylyev M.A., Chenakin S.P., Yatsenko L.F. Nitridation of Ti−6Al−4V alloy under ultrasonic impact treatment in liquid nitrogen. Acta Mater., 2012, 60(17): 6223.

[9] Mordyuk B.N., Karasevskaya O.P., Prokopenko G.I. Structurally induced enhancement in corrosion resistance of Zr−2.5%Nb alloy in saline solution by applying ultrasonic impact peening. Mater. Sci. Eng. A, 2013, 559, 453.

[10] Wang D.P., Gong B.M., Wu S.P., Zhang H., Feng Y.Y. Research review on fatigue life improvement of welding joint and structure. J. East Chin. Jiaotong. Univ., 2016, 33(6): 1.

[11] He B.L., Yu Y.X., Shi J.P., Yu H.H. The effect of ultrasonic impact on the fatigue properties of 16MnR steel welded joints for bogie. China Railw. Sci., 2011, 32(5): 97.

[12] Lu K., Lu J. Surface nanocrystallization (SNC) of metallic materials-presentation of the concept behind a new approach. J. Mater. Sci. Technol., 1999, 15(3): 193.

[13] Zhang C.H., Yu F., Xie G., Wang Y.M., He X.M. Microstructure and residual stress of surface nanocrystallized commercial pure zirconium. Rare Met. Mater. Eng., 2014, 43(9): 2147.

[14] Tian F., Yang H. Experimental study on wear behavior of nano-crystallization surface of 40Cr. Surf. Technol., 2013, 42(5): 53.

[15] Li D., Fan Z., Liao L.B., Hong X., Zhang L. Fabrication and characterization of nanocrystructured surface layer of J507 weld by ultrasonic impact peening. Trans. Chin. Weld. Inst., 2009, 30(1): 3.

[16] Zhao K., Wang M., Lin C.X., Tuo C. Mechanism and nanostructure evolution of surface self-nanocrystallization of TC17. Rare Met. Mater. Eng., 2013, 42(10): 2048.

[17] Wang T., Wang D.P., Liu G., Gong B.M., Song N.X. Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing. Appl. Surf. Sci., 2008, 255(5): 1827.

[18] Han J., Sheng G.M., Hu G.X., Zhou X.L., Yan J. Microstructure and properities of surface nanostructured layer of 0Cr18Ni9Ti stainless steel. Mater. Mech. Eng., 2008, 32(11): 66.

[19] Amanov A., Pyun Y.S., Kim J.H., Suh C.M., Cho I.S., Kim H.D., Wang Q., Khan M.K. Ultrasonic fatigue performance of high temperature structural material Inconel 718 alloys at high temperature after UNSM treatment. Fatigue Fract. Eng. Mater. Struct., 2015, 38(11): 1266.

[20] Zhu Y., Fan B.W., Guo W., Kang H. Influence of laser shock peening times on microstructure and hardness of TA15 titanium alloy. J. Beijing Univ. Aeronaut. Astronaut., 2014, 40(4): 444.