Influence of nano-Al₂O₃-reinforced oxide-dispersion-strengthened Cu on the mechanical and tribological properties of Cu-based composites

Abstract

The mechanical and tribological properties of Cu-based powder metallurgy (P/M) friction composites containing 10wt%–50wt% oxide-dispersion-strengthened (ODS) Cu reinforced with nano-Al₂O₃ were investigated. Additionally, the friction and wear behaviors as well as the wear mechanism of the Cu-based composites were characterized by scanning electron microscopy (SEM) in conjunction with energy-dispersive X-ray spectroscopy (EDS) elemental mapping. The results indicated that the Cu-based friction composite containing 30wt% ODS Cu exhibited the highest hardness and shear strength. The average and instantaneous friction coefficient curves of this sample, when operated in a high-speed train at a speed of 300 km/h, were similar to those of a commercial disc brake pad produced by Knorr-Bremse AG (Germany). Additionally, the lowest linear wear loss of the obtained samples was (0.008 ± 0.001) mm per time per face, which is much lower than that of the Knorr-Bremse pad ((0.01 ± 0.001) mm). The excellent performance of the developed pad is a consequence of the formation of a dense oxide composite layer and its close combination with the pad body.

Keywords

metal matrix composites / oxide dispersion strengthening / copper / nanoparticles / microstructure / mechanical properties / tribological properties

References

[1] Martinez A.M., Echeberria J. Towards a better understanding of the reaction between metal powders and the solid lubricant Sb2S3 in a low-metallic brake pad at high temperature. Wear, 2016, 348-349, 27.

[2] Yi G.W., Yan F.Y. Effect of hexagonal boron nitride and calcined petroleum coke on friction and wear behavior of phenolic resin-based friction composites. Mater. Sci. Eng. A, 2006, 425(1-2): 330.

[3] Sellami A., Kchaou M., Elleuch R., Crictol A.L., Desplanques Y. Study of the interaction between microstructure, mechanical and tribo-performance of a commercial brake lining material. Mater. Des., 2014, 59, 84.

[4] Blau P.J., Jolly B.C. Wear of truck brake lining materials using three different test methods. Wear, 2005, 259(7-12): 1022.

[5] Dhanasekaran S., Gnanamoorthy R. Dry sliding friction and wear characteristics of Fe-C-Cu alloy containing molybdenum di sulphide. Mater. Des., 2007, 28(4): 1135.

[6] Sun T., Song R.B., Yang F.Q., Wu C.J. Wear behavior of bainite ductile cast iron under impact load. Int. J. Miner. Metall. Mater., 2014, 21(9): 871.

[7] Kim S.H. Influence of sulphides on the tribological properties of composites produced by pulse electric current sintering. Int. J. Miner. Metall. Mater., 2014, 21(1): 95.

[8] Singh T., Patnaik A., Gangil B., Chauhan R. Optimization of tribo-performance of brake friction materials: Effect of nano filler. Wear, 2015, 324-325, 10.

[9] Xiong X., Chen J., Yao P.P., Li S.P., Huang B.Y. Friction and wear behaviors and mechanisms of Fe and SiO₂ in Cu-based P/M friction materials. Wear, 2007, 262(9-10): 1182.

[10] Deshpande P.K., Lin R.Y. Wear resistance of WC particle reinforced copper matrix composites and the effect of porosity. Mater. Sci. Eng. A, 2006, 418(1-2): 137.

[11] Wang Y., Yan Q.Z., Zhang X.L., Ge C.C., Zhao H.Q. Effect of copper powders on properties of Cu-based friction material. Chin. J. Mater. Res., 2013, 27(1): 37.

[12] Hao J.J., Guo Z.M., Chen C.G., Luo J., Guo L.C., Yang W.W., Wang W.W. Method for Preparing High-strength and High-conductivity Dispersion Strengthened Copper, 2013

[13] Ferkel H. Properties of copper reinforced by laser-generated Al₂O₃-nanoparticles. Nanostruct. Mater., 1999, 11(5): 595.

[14] Besterci M., Ivan J. The mechanism of the failure of the dispersion-strengthened Cu-Al₂O₃ system. J. Mater. Sci. Lett., 1998, 17(9): 773.

[15] Lee D.W., Ha G.H., Kim B.K. Synthesis of Cu-Al₂O₃ nano composite powder. Scripta Mater., 2001, 44(8-9): 2137.

[16] Laguna-Camacho J.R., Juárez-Morales G., Calderón- Ramón C., Velázquez-Martínez V., Hernández-Romero I., Méndez J.V., Vite-Torres M. A study of the wear mechanisms of disk and shoe brake pads. Eng. Failure Anal., 2015, 56, 348.

[17] Eriksson M., Bergman F., Jacobson S. Surface characterisation of brake pads after running under silent and squealing conditions. Wear, 1999, 232(2): 163.

[18] Kim D.J., Lee Y.M., Park J.S., Seok C.S. Thermal stress analysis for a disk brake of railway vehicles with consideration of the pressure distribution on a frictional surface. Mater. Sci. Eng. A, 2008, 483-484, 456.

[19] Morshed M.M., Haseeb A.S.M.A. Physical and chemical characteristics of commercially available brake shoe lining materials: a comparative study. J. Mater. Process. Technol., 2004, 155-156, 1422.

[20] So H., Yu D.S., Chuang C.Y. Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steel. Wear, 2002, 253(9-10): 1004.

[21] Liew K.W., Nirmal U. Frictional performance evaluation of newly designed brake pad materials. Mater. Des., 2013, 48, 25.

[22] Österle W., Deutsch C., Gradt T., Orts-Gil G., Schneider T., Dmitriev A.I. Tribological screening tests for the selection of raw materials for automotive brake pad formulations. Tribol. Int., 2014, 73, 148.