Enrichment of copper and recycling of cyanide from copper–cyanide waste by solvent extraction

Abstract

The enrichment of copper from copper–cyanide wastewater by solvent extraction was investigated using a quaternary ammonium salt as an extractant. The influences of important parameters, e.g., organic-phase components, aqueous pH values, temperature, inorganic anion impurities, CN/Cu molar ratio, and stripping reagents, were examined systematically, and the optimal conditions were determined. The results indicated that copper was effectively concentrated from low-concentration solutions using Aliquat 336 and that the extraction efficiency increased linearly with increasing temperature. The aqueous pH value and concentrations of inorganic anion impurities only weakly affected the extraction process when varied in appropriate ranges. The CN/Cu molar ratio affected the extraction efficiency by changing the distribution of copper–cyanide complexes. The difference in gold leaching efficiency between using raffinate and fresh water was negligible.

Keywords

copper cyanide / wastewater treatment / solvent extraction / copper / recovery

References

[1] Bas A.D., Koc E., Yazici E.Y., Deveci H. Treatment of copper-rich gold ore by cyanide leaching, ammonia pretreatment and ammoniacal cyanide leaching. Trans. Nonferrous Met. Soc. China, 2015, 25(2): 597.

[2] Arellano C.A.P., Martínez S.S. Effects of pH on the degradation of aqueous ferricyanide by photolysis and photocatalysis under solar radiation. Sol. Energy Mater. Sol. Cells, 2010, 94(2): 327.

[3] Kuyucak N., Akcil A. Cyanide and removal options from effluents in gold mining and metallurgical processes. Miner. Eng., 2013, 50-51, 13.

[4] Kitis M., Akcil A., Karakaya E., Yigit N.O. Destruction of cyanide by hydrogen peroxide in tailings slurries from low bearing sulphidic gold ores. Miner. Eng., 2005, 18(3): 353.

[5] Robbins G.H. Historical development of the INCO SO₂/air cyanide destruction process. CIM Bull., 1996, 89(1003): 63.

[6] Paraga J.R., Shukla S.S., Carrillo-Pedroza F.R. Destruction of cyanide waste solutions using chlorine dioxide, ozone and titania sol. Waste Manage., 2003, 23(2): 183.

[7] Dutra A.J.B., Rocha G.P., Pombo F.R. Copper recovery and cyanide oxidation by electrowinning from a spent copper ccyanide electroplating electrolyte. J. Hazard. Mater., 2008, 152(2): 648.

[8] Lu J., Dreisinger D.B., Cooper W.C. Copper electrowinning from dilute cyanide solution in a membrane cell using graphite felt. Hydrometallurgy, 2002, 64(1): 1.

[9] Lu J., Dreisinger D.B., Cooper W.C. Anodic behaviour of alkaline solutions containing copper cyanide and sulfite on the graphite anode. J. Appl. Electrochem., 2002, 32(10): 1109.

[10] Lemos F.A., Sobral L.G.S., Dutra A.J.B. Copper electrowinning from gold plant waste streams. Miner. Eng., 2006, 19(5): 388.

[11] Alonso-González O., Nava-Alonso F., Uribe-Salas A. Copper removal from cyanide solutions by acidification. Miner. Eng., 2009, 22(4): 324.

[12] Dai X., Breuer P.L. Cyanide and copper cyanide recovery by activated carbon. Miner. Eng., 2009, 22(5): 469.

[13] Dai X., Breuer P.L., Jeffrey M.I. Comparison of activated carbon and ion-exchange resins in recovering copper from cyanide leach solutions. Hydrometallurgy, 2010, 101(1–2): 48.

[14] Balesini A.A., Zakeri A., Razavizadeh H., Khani A. Nickel solvent extraction from cold purification filter cakes of Angouran mine concentrate using LIX984N. Int. J. Miner. Metall. Mater., 2013, 20(11): 1029.

[15] Alonso-González O., Nava-Alonso F., Uribe-Salas A., Dreisinger D. Use of quaternary ammonium salts to remove copper-cyanide complexes by solvent extraction. Miner. Eng., 2010, 23(10): 765.

[16] Alonso-González O., Nava-Alonso F., Jimenez-Velasco C., Uribe-Salas A. Copper cyanide removal by precipitation with quaternary ammonium salts. Miner. Eng., 2013, 42(3): 43.

[17] Xie F., Dreisinger D. Studies on solvent extraction of copper and cyanide from waste cyanide solution. J. Hazard. Mater., 2009, 169(1-3): 333.

[18] Xie F., Dreisinger D. Copper solvent extraction from alkaline cyanide solution with guanidine extractant LIX7950. Trans. Nonferrous Met. Soc. China, 2010, 20(6): 1136.

[19] Xie F., Dreisinger D. Recovery of copper cyanide from waste cyanide solution by LIX7950. Miner. Eng., 2009, 22(2): 190.