One step sintering of homogenized bauxite raw material and kinetic study

Abstract

A one-step sintering process of bauxite raw material from direct mining was completed, and the kinetics of this process was analyzed thoroughly. The results show that the sintering kinetics of bauxite raw material exhibits the liquid-phase sintering behavior. A small portion of impurities existed in the raw material act as a liquid phase. After X-ray diffraction analyses, scanning electron microscopy observations, and kinetics calculations, sintering temperature and heating duration were determined as the two major factors contributing to the sintering process and densification of bauxite ore. An elevated heating temperature and longer duration favor the densification process. The major obstacle for the densification of bauxite material is attributed to the formation of the enclosed blowhole during liquid-phase sintering.

Keywords

bauxite / refractory materials / liquid phase sintering / sintering kinetic studies

References

[1] Smith P. The processing of high silica bauxites: review of existing and potential processes. Hydrometallurgy, 2009, 98, 162.

[2] Abou-Sekkina M.M., Abo-El-Enein S.A., Khalil N.M., Shalma O.A. Phase composition of bauxite-based refractory castables. Ceram. Int., 2011, 37(1): 411.

[3] Tchamba A.B., Sofack J.C., Yongue R., Melo U.C. Formulation of calcium dialuminate (CaO·2Al₂O₃) refractory cement from local bauxite. J. Asian Ceram. Soc., 2015, 3(2): 164.

[4] Li B., Chen J.H., Su J.D., Yan M.W., Sun J.L., Li Y. Morphology of α-Si₃N₄ in Fe–Si₃N₄ prepared via flash combustion. Int. J. Miner. Metall. Mater., 2015, 22(12): 1322.

[5] Hojamberdiev M., Arifov P., Tadjiev K., Xu Y.H. Processing of refractory materials using various magnesium sources derived from Zinelbulak talc-magnesite. Int. J. Miner. Metall. Mater., 2011, 18(1): 105.

[6] Ahmad I., Hartge E.U., Werther J., Wischnewski R. Bauxite washing for the removal of clay. Int. J. Miner. Metall. Mater., 2014, 21(11): 1045.

[7] Ye F.B., Rigaud M., Liu X.H., Zhong X.C. High temperature mechanical properties of bauxite-based SiC-containing castables. Ceram. Int., 2004, 30(5): 801.

[8] Karamian E., Monshi A., Bataille A., Zadhoush A. Formation of nano SiC whiskers in bauxite–carbon composite materials and their consequences on strength and density. J. Eur. Ceram. Soc., 2011, 31(14): 2677.

[9] Kakroudi M.G., Yeugo-Gogaing E., Gault C., Huger M., Chotard T. Effect of thermal treatment on damage mechanical behaviour of refractory castables: Comparison between bauxite and andalusite aggregates. J. Eur. Ceram. Soc., 2008, 28(13): 2471.

[10] Ma S.H., Wen Z.G., Chen J.N., Zheng S.L. An environmentally friendly design for low-grade diasporic-bauxite processing. Miner. Eng., 2009, 22(9-10): 793.

[11] Caballero A., Requena J., de Aza S. Refractory bauxites. How processing can improve high temperature mechanical properties. Ceram. Int., 1986, 12(3): 155.

[12] Caballero A., Valle F.J., de Aza S., Castillo S. Constitution of calcined refractory-grade bauxites: an interpretation. Ceram. Int., 1985, 11(2): 45.

[13] Singh V.K. Densification of alumina and silica in the presence of a liquid phase. J. Am. Ceram. Soc., 2006, 64(10): 133.

[14] German R.M. Sintering: From Empirical Observations to Scientific Principles, 2014, Oxford, Elsevier, 247.

[15] Kang S.J.L., Kim K.H., Yoon D.N. Densification and shrinkage during liquid-phase sintering. J. Am. Ceram. Soc., 1991, 74(2): 425.