Highly efficient anode catalyst with a Ni@PdPt core–shell nanostructure for methanol electrooxidation in alkaline media

Abstract

To enhance the electrocatalytic activity of anode catalysts used in alkaline-media direct methanol fuel cells (DMFCs), a Ni@PdPt electrocatalyst was successfully prepared using a three-phase-transfer method. The Ni@PdPt electrocatalyst was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and high-resolution TEM (HRTEM) techniques. The experimental results indicate that the average particle size of the core–shell-structured Ni@PdPt electrocatalyst is approximately 5.6 nm. The Ni@PdPt electrocatalyst exhibits a catalytic activity 3.36 times greater than that of PdPt alloys for methanol oxidation in alkaline media. The developed Ni@PdPt electrocatalyst offers a promising alternative as a highly electrocatalytically active anode catalyst for alkaline DMFCs.

Keywords

direct methanol fuel cells / electrocatalysts / electrooxidation / composite structure / alkaline solutions

References

[1] Y. Feng, J.H. Yang, H. Liu, F. Ye, and J. Yang, Selective electrocatalysts toward a prototype of the membraneless direct methanol fuel cell, Sci. Rep., 4(2014), article No. 03813.

[2] Kakati N., Maiti J., Lee S.H., Jee S.H., Viswanathan B., Yoon Y.S. Anode catalysts for direct methanol fuel cells in acidic media: do we have any alternative for Pt or Pt–Ru. Chem. Rev., 2014, 114(24): 12397.

[3] Y. Gu, C.T. Liu, Y.B. Li, X.L. Sui, K. Wang, and Z.B. Wang, Ce_0.8Sn_0.2O₂-d–C composite as a co-catalytic support for Pt catalysts toward methanol electrooxidation, J. Power Sources, 265(2014), p. 335.

[4] Luo Y.L., Liang Z.X., Liao S.J. Recent development of anode electrocatalysts for direct methanol fuel cells. Chin. J. Catal., 2012, 31(2): 141.

[5] Jing M.Y., Jiang L.H., Yi B.L., Sun G.Q. Comparative study of methanol adsorption and electro-oxidation on carbon-supported platinum in acidic and alkaline electrolytes. J. Electroanal. Chem., 2013, 688, 172.

[6] Maksic A., Rakocevic Z., Smiljanic M., Nenadovic M., Strbac S. Methanol oxidation on Pd/Pt(poly) in alkaline solution. J. Power Sources, 2015, 273, 724.

[7] Yang C.C., Chiu S.S., Kuo S.C., Liou T.H. Fabrication of anion-exchange composite membranes for alkaline direct methanol fuel cells. J. Power Sources, 2012, 199, 37.

[8] Wang C., Vliet D.V.D., More K.L., Zaluzec N.J., Peng S., Sun S.H., Daimon H., Wang G.F., Greeley J., Pearson J., Paulikas A.P., Karapetrov G., Strmcnik D., Markovic N.M., Stamenkovic V.R. Multimetallic Au/FePt₃ nanoparticles as highly durable electrocatalyst. Nano Lett., 2011, 11(3): 919.

[9] Mazumder V., Chi M.F., More K.L., Sun S.H. Core/shell Pd/FePt nanoparticles as an active and durable catalyst for the oxygen reduction reaction. J. Am. Chem. Soc., 2010, 132(23): 7848.

[10] Wang R.Y., Wang C., Cai W.B., Ding Y. Ultralow-platinum-loading high-performance nanoporous electrocatalysts with nanoengineered surface structures. Adv. Mater., 2010, 22(16): 1845.

[11] L. Han, H. Liu, P.L. Cui, Z.J. Peng, S.J. Zhang, and J. Yang, Alloy Cu3Pt nanoframes through the structure evolution in Cu–Pt nanoparticles with a core-shell construction, Sci. Rep., 4(2014), article No. 06414.

[12] Wang X.S., Wang H., Lei Z.Q., Zhang Z., Wang R.F. The performance of carbon-supported platinum-decorated nickel electrocatalyst for ethanol oxidation. Chin. J. Catal., 2011, 32(9): 1519.

[13] Zhang Q., Yao Z.Q., Zhou R., Du Y.K., Yang P. Fabrication of Ag/Au/Pt composite catalysts and their electrocatalytic oxidation for formic acid. Acta Chim. Sin., 2012, 70(20): 2149.

[14] Zhang S., Shao Y., Yin G., Lin Y. Electrostatic self-assembly of a Pt-around-Au nanocomposite with high activity towards formic acid oxidation. Angew. Chem. Int. Ed., 2010, 49(12): 2211.

[15] H. Liu, F. Ye, Q.F. Yao, H.B. Cao, J.P. Xie, J.Y. Lee, and J. Yang, Stellated Ag–Pt bimetallic nanoparticles: An effective platform for catalytic activity tuning, Sci. Rep., 4(2014), article No. 03969.

[16] Wang G., Takeguchi T., Muhamad E.N., Yamanaka T., Ueda W. Investigation of grain boundary formation in PtRu/C catalyst obtained in a polyol process with post-treatment. Int. J. Hydrogen Energy, 2011, 36(5): 3322.

[17] X.Y. Liu, G.R. Xu, Y. Chen, T.H. Lu, Y.W. Tan, and W. Xing, A strategy for fabricating porous PdNi@Pt core–shell nanostructures and their enhanced activity and durability for the methanol electrooxidation, Sci. Rep., 5(2015), article No. 07619.

[18] Cai J.D., Zeng Y.Z., Guo Y.L. Copper@palladium-copper core–shell nanospheres as a highly effective electrocatalyst for ethanol electro-oxidation in alkaline media. J. Power Sources, 2014, 270, 257.

[19] Q. Tan, C.Y. Du, Y.G. Sun, L. Du, G.P. Yin, and Y.Z. Gao, Nickel-doped ceria nanoparticles for promoting catalytic activity of Pt/C for ethanol electrooxidation, J. Power Sources, 263(2014), p. 310.

[20] Zhang X.B., Yan J.M., Han S., Shioyama H., Xu Q. Magnetically recyclable Fe@Pt core–shell nanoparticles and their use as electrocatalysts for ammonia borane oxidation: The role of crystallinity of the core. J. Am. Chem. Soc., 2009, 131(8): 2778.

[21] Zhang X.T., Wang H., Key J.L., Linkov V., Ji S., Wang X.L., Lei Z.Q., Wang R.F. Strain effect of core–shell Co@Pt/C nanoparticle catalyst with enhanced electrocatalytic activity for methanol oxidation. J. Electrochem. Soc., 2012, 159(3): 270.

[22] Gan L., Heggen M., Rudi S., Strasser P. Core–shell compositional fine structures of dealloyed PtxNi1-x nanoparticles and their impact on oxygen reduction catalysis. Nano Lett., 2012, 12(10): 5423.

[23] J.H. Yang, X.J. Chen, X.F. Yang, and J.Y. Ying, Stabilization and compressive strain effect of AuCu core on Pt shell for oxygen reduction reaction, Energ Environ. Sci., 5(2012), p. 8976.

[24] Ding L.X., Li G.R., Wang Z.L., Liu Z.Q., Liu H., Tong Y.X. Porous Ni@Pt core–shell nanotube array electrocatalyst with high activity and stability for methanol oxidation. Chemistry, 2012, 18(27): 8386.

[25] Kang Y.J., Snyder J., Chi M.F., Li D.G., More K.L., Markovic N.M., Stamenkovic V.R. Multimetallic core/interlayer/ shell nanostructures as advanced electrocatalysts. Nano Lett., 2014, 14(11): 6361.

[26] Zhao Y.C., Yang X.L., Tian J.N., Wang F.Y., Zhan L. Methanol electro-oxidation on Ni@Pd core–shell nanoparticles supported on multi-walled carbon nanotubes in alkaline media. Int. Hydrogen Energy, 2010, 35(8): 3249.

[27] Zhang M.M., Yan Z.X., Xie J.M. Core/shell Ni@Pd nanoparticles supported on MWCNTs at improved electrocatalytic performance for alcohol oxidation in alkaline media. Electrochim. Acta, 2012, 77, 237.

[28] Wang H., Zhang X.T., Wang R.F., Ji S., Wang W., Wang Q.Z., Lei Z.Q. Amorphous CoSn alloys decorated by Pt as high efficiency electrocatalysts for ethanol oxidation. J. Power Sources, 2011, 196(19): 8000.

[29] Ren F.F., Wang H.W., Zhai C.Y., Zhu M.S., Yue R.R., Du Y.K., Yang P., Xu J.K., Lu W.S. Clean method for the synthesis of reduced graphene oxide-supported PtPd alloys with high electrocatalytic activity for ethanol oxidation in alkaline medium. ACS Appl. Mater. Interfaces, 2014, 6, 3607.

[30] Fu X.Z., Liang Y., Chen S.P., Lin J.D., Liao D.W. Pt-rich shell coated Ni nanoparticles as catalysts for methanol electro-oxidation in alkaline media. Catal. Commun., 2009, 10(14): 1893.

[31] Tsud N., Johánek V., Stará I., Veltruská K., Matolín V. XPS, ISS and TPD study of Pd–Sn interactions on Pd-SnOx systems. Thin Solid Films, 2001, 391(2): 204.

[32] Xu J.B., Zhao T.S., Li Y.S., Yang W.W. Synthesis and characterization of the Au-modified Pd cathode catalyst for alkaline direct ethanol fuel cells. Int. J. Hydrogen Energy, 2010, 35(18): 9693.

[33] Nie R.F., Wang J.H., Wang L.N., Qin Y., Chen P., Hou Z.Y. platinum supported on reduced graphene oxide as a catalyst for hydrogenation of nitroarenes. Carbon, 2012, 50(2): 586.

[34] Vinayan B.P., Ramaprabhu S. Platinum–TM (TM = Fe, Co) alloy nanoparticles dispersed nitrogen doped (reduced graphene oxide-multiwalled carbon nanotube) hybrid structure cathode electrocatalysts for high performance PEMFC applications. Nanoscale, 2013, 5, 5109.

[35] Liang Y.M., Zhang H.M., Zhong H.X., Zhu X.B., Tian Z.Q., Xu D.Y., Yi B.L. Preparation and characterization of carbon-supported PtRuIr catalyst with excellent CO-tolerant performance for proton-exchange membrane fuel cells. J. Catal., 2006, 238(2): 468.

[36] Xia B.Y., Wu H.B., Yan Y., Wen X., Wang X. Ultrathin and ultralong single-crystal platinum nanowire assemblies with highly stable electrocatalytic activity. J. Am. Chem. Soc., 2013, 135(25): 9480.

[37] Wang X.Y., Zhang J.C., Cao X.D., Jiang Y.S., Zhu H. Synthesis and characterization of Pt–MoOx–TiO2 electrodes for direct ethanol fuel cells. Int. J. Miner. Metall. Mater., 2011, 18(5): 594.

[38] Itoh M., Saito M., Takehara M., Motoki K., Iwamoto J., Machida K. Influence of supported-metal characteristics on deNOx catalytic activity over Pt/CeO₂. J. Mol. Catal. A, 2009, 304(1-2): 159.

[39] Tan Q., Du C.Y., Yin G.P., Zuo P.J., Cheng X.Q., Chen M. Highly efficient and stable nonplatinum anode catalyst with Au@Pd core–shell nanostructures for methanol electrooxidation. J. Catal., 2012, 295, 217.

[40] Wei W.T., Chen W. “Naked” Pd nanoparticles supported on carbon nanodots as efficient anode catalysts for methanol oxidation in alkaline fuel cells. J. Power Sources, 2012, 204, 85.

[41] Li Z.Y., Ling Y.J., Jiang S.P., Shan X.D., Lin M.L., Xu C.W. Electrooxidation of methanol and ethylene glycol mixture on platinum and palladium in alkaline medium. Fuel Cells, 2012, 12(4): 677.