Effect of mold rotation on the bifilar electroslag remelting process

Abstract

A novel electroslag furnace with a rotating mold was fabricated, and the effects of mold rotational speed on the electroslag remelting process were investigated. The results showed that the chemical element distribution in ingots became uniform and that their compact density increased when the mold rotational speed was increased from 0 to 28 r/min. These results were attributed to a reasonable mold speed, which resulted in a uniform temperature in the slag pool and scattered the metal droplets randomly in the metal pool. However, an excessive rotational speed caused deterioration of the solidification structure. When the mold rotational speeds was increased from 0 to 28 r/min, the size of Al₂O₃ inclusions in the electroslag ingot decreased from 4.4 to 1.9 μm. But the excessive mold rotational speed would decrease the ability of the electroslag remelting to remove the inclusions. The remelting speed gradually increased, which resulted in reduced power consumption with increasing mold rotational speed. This effect was attributed to accelerated heat exchange between the consumable electrode and the molten slag, which resulted from mold rotation. Nevertheless, when the rotational speed reached 28 r/min, the remelting speed did not change because of limitations of metal heat conduction. Mold rotation also improved the surface quality of the ingots by promoting a uniform temperature distribution in the slag pool.

Keywords

electroslag remelting / inclusions / solidification / molds / rotation speed / power consumption

References

[1] Li Z.B. Electroslag Metallurgy Theory and Practice, 2010, Beijing, Metallurgical Industry Press, 50.

[2] Paton B.E., Medovar L.B. Improving the electroslag remelting of steel and alloys. Steel Transl., 2008, 38(12): 1028.

[3] Hoyle G. Electroslag Processes: Principles and Practice, 1983, London, Applied Science Publishers, 1.

[4] Jiang Z.H., Dong Y.W., Jia J.P., Shi M.J., Yu Q., Sun G.H. Research on electroslag remelting technology for producing large cold roll. China Metall., 2006, 16(12): 9.

[5] Li Z.B. Electroslag Metallurgy Equipment and Technology, 2012, Beijing, Metallurgical Industry Press, 19.

[6] Alghisi D., Milano M., Pazienza L. The electroslag rapid remelting process under protective atmosphere of 145 mm billets. Medovar Memorial Symposium, Kyiv, 2001 97.

[7] Anon. High quality billets by electroslag rapid remelting (ESRR). Steel Times Int., 1997, 21(7): 20.

[8] Holzgruber H., Holzgruber W. ESR development at INTECO. Medovar Memorial Symposium, Kyiv, 2001 41.

[9] Dong Y.W., Jiang Z.H., Medovar L., Stovpchenko G., Zhang X.F., Zang X.M., Deng X. Temperature distribution of electroslag casting with liquid metal using current conductive ring. Steel Res. Int., 2013, 84(10): 1011.

[10] Dong Y.W., Jiang Z.H., Hui H., Chen R., Song Z.W. Simulation of multi-electrode ESR process for manufacturing large ingot. ISIJ Int., 2012, 52(12): 2226.

[11] Dong Y.W., Jiang Z.H., Li Z.B. Investigation on solidification quality of industrial-scale ESR ingot. Proceedings of the International Symposium on Liquid Metal Processing and Casting, Santa Fe, NM, 2009 309.

[12] Wang H.Z. A new method of statistic characterization of specific properties of materials: original position statistic distribution analysis. Phys. Test. Chem. Anal. Part B, 2006, 42(1): 1.

[13] Yang Z.M., He Y.T., Li Z.Q. Principle and performance of original position analytical instrument. Metall. Anal., 2004, 24, 26.

[14] Zhao F.X., Li H., Xu X.C., Li L., Xu H.H. Influence of inclusion size on fatigue life of high strength steel for automobile wheel. Min. Metall. Eng., 2013, 33(1): 101.

[15] Zhao H.M., Hui W.J., Nie Y.H., Dong H., Weng Y.Q. Effect of inclusion size on high-cycle fatigue behavior of high strength spring steel. Iron Steel, 2008, 43(5): 66.

[16] Chumanov I.V., Chumanov V.I. Technology for electroslag remelting with rotation of the consumable electrode. Metallurgist, 2001, 45(3-4): 125.

[17] Chumanov V.I., Roshchin V.E., Chumanov I.V. Development of technology for producing the castings of variable section by the ESR method with rotation of consumable electrode. Metallurgist, 1997, 41(3-4): 5.

[18] Chumanov V.I., Chumanov I.V. Increasing the efficiency of the electroslag process and improving the metal quality by rotating a consumable electrode: Part 1. Russ. Metall. (Metally), 2010, 6, 499.