Ultra-fine grinding and mechanical activation of mine waste rock using a high-speed stirred mill for mineral carbonation

Jia-jie Li , Michael Hitch

International Journal of Minerals, Metallurgy, and Materials ›› 2015, Vol. 22 ›› Issue (10) : 1005 -1016.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2015, Vol. 22 ›› Issue (10) :1005 -1016. DOI: 10.1007/s12613-015-1162-3
Article

Ultra-fine grinding and mechanical activation of mine waste rock using a high-speed stirred mill for mineral carbonation

Author information +
History +
PDF

Abstract

CO2 sequestration by mineral carbonation can permanently store CO2 and mitigate climate change. However, the cost and reaction rate of mineral carbonation must be balanced to be viable for industrial applications. In this study, it was attempted to reduce the carbonation costs by using mine waste rock as a feed stock and to enhance the reaction rate using wet mechanical activation as a pre-treatment method. Slurry rheological properties, particle size distribution, specific surface area, crystallinity, and CO2 sequestration reaction efficiency of the initial and mechanically activated mine waste rock and olivine were characterized. The results show that serpentine acts as a catalyst, increasing the slurry yield stress, assisting new surface formation, and hindering the size reduction and structure amorphization. Mechanically activated mine waste rock exhibits a higher carbonation conversion than olivine with equal specific milling energy input. The use of a high-speed stirred mill may render the mineral carbonation suitable for mining industrial practice.

Keywords

mineral carbonation / mine wastes / mechanical activation / grinding

Cite this article

Download citation ▾
Jia-jie Li, Michael Hitch. Ultra-fine grinding and mechanical activation of mine waste rock using a high-speed stirred mill for mineral carbonation. International Journal of Minerals, Metallurgy, and Materials, 2015, 22(10): 1005-1016 DOI:10.1007/s12613-015-1162-3

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Intergovernmental Panel on Climate Change (IPCC), IPCC Fifth Assessment Report: Climate Change 2013 — The Physical Science Basis, Eds. by T.F. Stocker, D. Qin, G.K. Plattner, et al., Cambridge University Press, Cambridge, 2013, p. 1535.

[2]

Power I.M., Harrison A.L., Dipple G.M., Wilson S.A., Kelemen P.B., Hitch M., Southam G. Carbon mineralization: From natural analogues to engineered systems. Rev. Mineral. Geochem., 2013, 77(1): 305.

[3]

Bobicki E.R., Liu Q.X., Xu Z.H. Mineral carbon storage in pre-treated ultramafic ores. Miner. Eng., 2015, 70, 43.

[4]

Hitch M., Ballantyne S.M., Hindle S.R. Revaluing mine waste rock for carbon capture and storage. Int. J. Min. Reclam. Environ., 2010, 24(1): 64.

[5]

Hitch M., Dipple G.M. Economic feasibility and sensitivity analysis of integrating industrial-scale mineral carbonation into mining operations. Miner. Eng., 2012, 39, 268.

[6]

Wilson S.A. Mineral Traps for Greenhouse Gases in Mine Tailings: A Protocol for Verifying and Quantifying CO2 Sequestration in Ultramafic Mines [Dissertation], 2009, Vancouver, University of British Columbia, 315.

[7]

Wills B.A., Napier-Munn T. Will’s Mineral Processing Technology: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery (7th Ed.), 2006, Oxford, Butterworth-Heinemann, 450.

[8]

Haug T.A. Dissolution and Carbonation of Mechanically Activated Olivine [Dissertation], 2010, Trondheim, Norwegian University of Science and Technology, 243.

[9]

Baláž P. Mechanochemistry in Nanoscience and Minerals Engineering, 2008 413.

[10]

Pourghahramani P. Mechanical Activation of Hematite Using Different Grinding Methods with Special Focus on Structural Changes and Reactivity [Dissertation], 2007 117.

[11]

Sandvik K.L., Kleiv R.A., Haug T.A. Mechanically activated minerals as a sink for CO2. Adv. Powder Technol., 2011, 22(3): 416.

[12]

O’Connor W.K., Dahlin D.C., Rush G.E., Gerdemann S.J., Penner L.R., Nilsen D.N. Aqueous Mineral Carbonation: Mineral Availability, Pretreatment. Reaction Parametrics, and Process Studies, 2005, US, Albany, Department of Energy, 462.

[13]

Baláž P., Turianicová E., Fabián M., Kleiv R.A., Briancin J., Obut A. Structural changes in olivine (Mg, Fe)2SiO4 mechanically activated in high-energy mills. Int. J. Miner. Process., 2008, 88(1-2): 1.

[14]

Summers C.A., Dahlin D.C., Rush G.E., O’Connor W.K., Gerdemann S.J. Grinding methods to enhance the reactivity of olivine. SME Annual Meeting, Denver, 2004

[15]

Kim D.J., Sohn J.S., Ahn J.G., Chung H.S. Extraction of Metals from Mechanically Milled Serpentine. Geosyst. Eng., 2008, 11(2): 25.

[16]

Drief A., Nieto F. The effect of dry grinding on antigorite from Mulhacen. Spain, Clays Clay Miner., 1999, 47(4): 417.

[17]

Yue J., Klein B. Particle breakage kinetics in horizontal stirred mills. Miner. Eng., 2005, 18, 325.

[18]

Klein B., Laskowski J.S., Partridge S.J. A new viscometer for rheological measurements on settling suspensions. J. Rheol., 1995, 39, 827.

[19]

Jankovic A. Variables affecting the fine grinding of minerals using stirred mills. Miner. Eng., 2003, 16(4): 337.

[20]

He M.Z., Wang Y.M., Forssberg E. Slurry rheology in wet ultrafine grinding of industrial minerals: a review. Powder Technol., 2004, 147(1-3): 94.

[21]

Yue J., Klein B. Influence of rheology on the performance of horizontal stirred mills. Miner. Eng., 2004, 17(11-12): 1169.

[22]

Ndlovu B.N., Forbes E., Becker M., Deglon D.A., Franzidis J.P., Laskowski J.S. The effects of chrysotile mineralogical properties on the rheology of chrysotile suspensions. Miner. Eng., 2011, 24(9): 1004.

[23]

Reem A.R. The Effect of Stirred Mill Operation on Particles Breakage Mechanism and their Morphological Features [Dissertation], 2011, Vancouver, University of British Columbia, 266.

[24]

Boldyrev V.V., Pavlov S.V., Goldberg E.L. Interrelation between fine grinding and mechanical activation. Int. J. Miner. Process., 1996, 44-45, 181.

[25]

Klein C., Hurlbut C.S., Dana J.D. Manual of Mineralogy (21st Ed.), 1998, New York, John Wiley & Sons, 532.

[26]

Ohlberg S.M., Strickler D.W. Determination of percent crystallinity of partly devitrified glass by X-ray diffraction. J. Am. Ceram. Soc., 1962, 45(4): 170.

[27]

Gualtieri A.F., Giacobbe C., Viti C. The dehydroxylation of serpentine group minerals. Am. Mineral., 2012, 97, 666.

[28]

Hövelmann J., Austrheim H., Beinlich A., Munz I.A. Experimental study of the carbonation of partially serpentinized and weathered peridotites. Geochim. Cosmochim. Acta, 2011, 75(22): 6760.

[29]

Tkácová K., Baláž P. Structural and temperature sensitivity of leaching of chalcopyrite with iron (III) sulphate. Hydrometallurgy, 1988, 21(1): 103.

[30]

Lafay R., Montes-Hernandez G., Janots E., Chiriac R., Findling N., Toche F. Simultaneous precipitation of magnesite and lizardite from hydrothermal alteration of olivine under high-carbonate alkalinity. Chem. Geol., 2014, 368, 63.

[31]

Gerdemann S.J., O’Connor W.K., Dahlin D.C., Penner L.R., Rush H. Ex situ aqueous mineral carbonation. Environ. Sci. Technol., 2007, 41(7): 2587.

AI Summary AI Mindmap
PDF

186

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/