Effects of La addition on the microstructure and tensile properties of Al-Si-Cu-Mg casting alloys

Abstract

The effects of La addition on the microstructure and tensile properties of B-refined and Sr-modified Al-11Si-1.5Cu-0.3Mg casting alloys were investigated. With a trace addition of La (0.05wt%–0.1wt%), the mutual poisoning effect between B and Sr can be neutralized by the formation of LaB₆ rather than SrB₆. By employing a La/B weight ratio of 2:1, uniform microstructures, which are characterized by well refined α-Al grains and adequately modified eutectic Si particles as well as the incorporation of precipitated strengthening intermetallics, are obtained and lead to appreciable tensile properties with an ultimate tensile strength of 270 MPa and elongation of 5.8%.

Keywords

aluminum silicon alloys / rare earth addition / lanthanum / microstructure / tensile properties / precipitates

References

[1] Zeren M, Karakulak E, Gümüş S. Influence of Cu addition on microstructure and hardness of near-eutectic Al-Si-xCu-alloys. Trans. Nonferrous Met. Soc. China, 2011, 21(8): 1698.

[2] Ravi KR, Manivannan S, Phanikumar G, Murty BS, Sundarraj S. Influence of Mg on grain refinement of near eutectic Al-Si alloys. Metall. Mater. Trans. A, 2011, 42(7): 2028.

[3] Ammar HR, Moreau C, Samuel AM, Samuel FH, Doty HW. Influences of alloying elements, solution treatment time and quenching media on quality indices of 413-type Al-Si casting alloys. Mater. Sci. Eng. A, 2008, 489(1–2): 426.

[4] Asghar Z, Requena G. Three dimensional post-mortem study of damage after compression of cast Al-Si alloys. Mater. Sci. Eng. A, 2014, 591, 136.

[5] Hegde S, Prabhu KN. Modification of eutectic silicon in Al-Si alloys. J. Mater. Sci., 2008, 43(9): 3009.

[6] Stadler F, Antrekowitsch H, Fragner W, Kaufmann H, Pinatel ER, Uggowitzer PJ. The effect of main alloying elements on the physical properties of Al-Si foundry alloys. Mater. Sci. Eng. A, 2013, 560, 481.

[7] Stadler F, Antrekowitsch H, Fragner W, Kaufmann H, Uggowitzer PJ. Effect of main alloying elements on strength of Al-Si foundry alloys at elevated temperatures. Int. J. Cast Met. Res., 2012, 25(4): 215.

[8] Sjölander E, Seifeddine S. The heat treatment of Al-Si-Cu-Mg casting alloys. J. Mater. Process. Technol., 2010, 210(10): 1249.

[9] Samuel AM, Doty HW, Valtierra S, Samuel FH. Effect of grain refining and Sr-modification interactions on the impact toughness of Al-Si-Mg cast alloys. Mater. Des., 2014, 56, 264.

[10] Mallapur DG, Kori SA, Udupa KR. Influence of Ti, B and Sr on the microstructure and mechanical properties of A356 alloy. J. Mater. Sci., 2011, 46(6): 1622.

[11] Sigworth GK. The grain refining of aluminum and phase relationships in the Al-Ti-B system. Metall. Trans. A, 1984, 15(2): 277.

[12] Birol Y. AlB3 master alloy to grain refine AlSi10Mg and AlSi12Cu aluminium foundry alloys. J. Alloys Compd., 2012, 513, 150.

[13] Birol Y. Performance of AlTi5B1, AlTi3B3 and AlB3 master alloys in refining grain structure of aluminium foundry alloys. Mater. Sci. Technol., 2012, 28(4): 481.

[14] Liao HC, Sun GX. Mutual poisoning effect between Sr and B in Al-Si casting alloys. Scripta Mater, 2003, 48(8): 1035.

[15] Elsebaie O, Samuel FH, Al Kahtani S. Intermetallic phases observed in non-modified and Sr modified Al-Si cast alloys containing mischmetal. Int. J. Cast Met. Res., 2013, 26(1): 1.

[16] Tsai YC, Lee SL, Lin CK. Effect of trace Ce addition on the microstructures and mechanical properties of A356 (AL-7SI-0.35 Mg) aluminum alloys. J. Chin. Inst. Eng., 2011, 34(5): 609.

[17] Zhu M, Jian ZY, Yao LJ, Liu CX, Yang GC, Zhou YH. Effect of mischmetal modification treatment on the microstructure, tensile properties, and fracture behavior of Al-7.0%Si-0.3%Mg foundry aluminum alloys. J. Mater. Sci., 2011, 46(8): 2685.

[18] Sjölander E, Seifeddine S. Optimization of solution treatment of cast Al-7Si-0.3Mg and Al-8Si-3Cu-0.5Mg alloys. Metall. Mater. Trans. A, 2014, 45(4): 1916.

[19] Han Y, Samuel AM, Doty HW, Valtierra S, Samuel FH. Optimizing the tensile properties of Al-Si-Cu-Mg 319-type alloys: role of solution heat treatment. Mater. Des., 2014, 58, 426.

[20] Birol Y. Effect of silicon content in grain refining hypoeutectic Al-Si foundry alloys with boron and titanium additions. Mater. Sci. Technol., 2012, 28(4): 385.

[21] Samuel E, Golbahar B, Samuel AM, Doty HW, Valtierra S, Samuel FH. Effect of grain refiner on the tensile and impact properties of Al-Si-Mg cast alloys. Mater. Des., 2014, 56, 468.

[22] Li PT, Tian WJ, Wang D, Liu XF. Grain refining potency of LaB₆ on aluminum alloy. J. Rare Earths, 2012, 30(11): 1172.