Effect of microstructure on the low temperature toughness of high strength pipeline steels

Abstract

Microstructure observations and drop-weight tear test were performed to study the microstructures and mechanical properties of two kinds of industrial X70 and two kinds of industrial X80 grade pipeline steels. The effective grain size and the fraction of high angle grain boundaries in the pipeline steels were investigated by electron backscatter diffraction analysis. It is found that the low temperature toughness of the pipeline steels depends not only on the effective grain size, but also on other microstructural factors such as martensite-austenite (MA) constituents and precipitates. The morphology and size of MA constituents significantly affect the mechanical properties of the pipeline steels. Nubby MA constituents with large size have significant negative effects on the toughness, while smaller granular MA constituents have less harmful effects. Similarly, larger Ti-rich nitrides with sharp corners have a strongly negative effect on the toughness, while fine, spherical Nb-rich carbides have a less deleterious effect. The low temperature toughness of the steels is independent of the fraction of high angle grain boundaries.

Keywords

high strength pipe steels / microstructure / low temperature / toughness / influencing factors

References

[1] Reip CP, Shanmugam S, Misra RDK. High strength microalloyed CMn(V-Nb-Ti) and CMn(V-Nb) pipeline steels processed through CSP thin-slab technology: microstructure, precipitation and mechanical properties. Mater. Sci. Eng. A, 2006, 424(1–2): 307.

[2] Shin SY, Hwang B, Lee S, Kang KB. Effects of notch shape and specimen thickness on drop-weight tear test properties of API X70 and X80 line-pipe steels. Metall. Mater. Trans. A, 2007, 38(3): 537.

[3] Hwang B, Lee S, Kim YM, Kim NJ, Yoo JY, Woo CS. Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel. Mater. Sci. Eng. A, 2004, 368(1–2): 18.

[4] Shukla R, Das SK, Kumar B R, Ghosh SK, Kundu S, Chatterjee S. An ultra-low carbon, thermomechanically controlled processed microalloyed steel: microstructure and mechanical properties. Metall. Mater. Trans. A, 2012, 43(12): 4835.

[5] Wang W, Yan W, Zhu L, Hu P, Shan YY, Yang K. Relation among rolling parameters, microstructures and mechanical properties in an acicular ferrite pipeline steel. Mater. Des., 2009, 30(9): 3436.

[6] Xu J, Misra RDK, Guo B, Jia Z, Zheng L. Under standing variability in mechanical properties of hot rolled microalloyed pipeline steels: process-structure-property relationship. Mater. Sci. Eng. A, 2013, 574, 94.

[7] Krauss G, Thompson SW. Ferritic microstructures in continuously cooled low- and ultralow-carbon steels. ISIJ Int., 1995, 35(8): 937.

[8] Shanmugam S, Misra RDK, Hartmann J, Jansto SG. Microstructure of high strength niobium-containing pipeline steel. Mater. Sci. Eng. A, 2006, 441(1–2): 215.

[9] Shukla R, Ghosh SK, Chakrabarti D, Chatterjee S. Microstructure, texture, property relationship in thermo-mechanically processed ultra-low carbon microalloyed steel for pipeline application. Mater. Sci. Eng. A, 2013, 587, 201.

[10] Hwang B, Lee S, Kim YM, Kim NJ, Yoo JY. Correlation of rolling condition, microstructure, and low-temperature toughness of X70 pipeline steels. Metall. Mater. Trans. A, 2005, 36(7): 1793.

[11] Yakubtsov IA, Poruks P, Boyd JD. Microstructure and mechanical properties of bainitic low carbon high strength plate steels. Mater. Sci. Eng. A, 2008, 480(1–2): 109.

[12] Zhao AM, Wang Y, Chen YL, Tang D, Gao XT, Zuo BQ. Precipitation behaviors of X80 acicular ferrite pipeline steel. Int. J. Miner. Metall. Mater., 2011, 18(3): 309.

[13] Yu H, Sun Y, Chen QX, Jiang HT, Zhang LH. Precipitation behaviors of X70 acicular ferrite pipeline steel. J. Univ. Sci. Technol. Beijing, 2006, 13(6): 523.

[14] Díaz-Fuentes M, Iza-Mendia A, Gutiérrez I. Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction: study of their toughness behavior. Metall. Mater. Trans. A, 2003, 34(11): 2505.

[15] Hwang B, Kim YG, Lee S, Kim YM, Kim NJ, Yoo JY. Effective grain size and Charpy impact properties of high-toughness X70 pipeline steels. Metall. Mater. Trans. A, 2005, 36(8): 2107.

[16] Wang W, Shan YY, Yang K. Study of high strength pipeline steels with different microstructures. Mater. Sci. Eng. A, 2009, 502(1–2): 38.