Extracting copper from copper oxide ore by a zwitterionic reagent and dissolution kinetics

Jiu-shuai Deng , Shu-ming Wen , Jian-ying Deng , Dan-dan Wu

International Journal of Minerals, Metallurgy, and Materials ›› 2015, Vol. 22 ›› Issue (3) : 241 -248.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2015, Vol. 22 ›› Issue (3) : 241 -248. DOI: 10.1007/s12613-015-1067-1
Article

Extracting copper from copper oxide ore by a zwitterionic reagent and dissolution kinetics

Author information +
History +
PDF

Abstract

Sulfamic acid (SA), which possesses a zwitterionic structure, was applied as a leaching reagent for the first time for extracting copper from copper oxide ore. The effects of reaction time, temperature, particle size, reagent concentration, and stirring speed on this leaching were studied. The dissolution kinetics of malachite was illustrated with a three-dimensional diffusion model. A novel leaching effect of SA on malachite was eventually demonstrated. The leaching rate increased with decreasing particle size and increasing concentration, reaction temperature and stirring speed. The activation energy for SA leaching malachite was 33.23 kJ/mol. Furthermore, the effectiveness of SA as a new reagent for extracting copper from copper oxide ore was confirmed by experiment. This approach may provide a solution suitable for subsequent electrowinning. In addition, results reported herein may provide basic data that enable the leaching of other carbonate minerals of copper, zinc, cobalt and so on in an SA system.

Keywords

malachite / copper / extraction / sulfamic acid / dissolution / kinetics

Cite this article

Download citation ▾
Jiu-shuai Deng, Shu-ming Wen, Jian-ying Deng, Dan-dan Wu. Extracting copper from copper oxide ore by a zwitterionic reagent and dissolution kinetics. International Journal of Minerals, Metallurgy, and Materials, 2015, 22(3): 241-248 DOI:10.1007/s12613-015-1067-1

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Arzutug ME, Kocakerim MM, Çopur M. Leaching of malachite ore in NH3-saturated water. Ind. Eng. Chem. Res., 2004, 43(15): 4118.

[2]

Künkül A, Gülezgin A, Demirkiran N. Investigation of the use of ammonium acetate as an alternative lixiviant in the leaching of malachite ore. Chem. Ind. Chem. Eng. Q., 2013, 19(1): 25.

[3]

Muchez Ph, Corbella M. Factors controlling the precipitation of copper and cobalt minerals in sediment-hosted ore deposits: advances and restrictions. J. Geochem. Explor., 2012, 118, 38.

[4]

Peacey J, Guo XJ, Robles E. Copper hydrometallurgy-current status, preliminary economics, future direction and positioning versus smelting. Trans. Nonferrous Met. Soc. China, 2004, 14(3): 560.

[5]

Antonijević MM, Dimitrijević MD, Stevanović ZO, Serbula SM, Bogdanovic GD. Investigation of the possibility of copper recovery from the flotation tailings by acid leaching. J. Hazard. Mater., 2008, 158(1): 23.

[6]

Viñals J, Roca A, Hernández MC, Benavente O. Topochemical transformation of enargite into copper oxide by hypochlorite leaching. Hydrometallurgy, 2003, 68(1–3): 183.

[7]

Habbache N, Alane N, Djerad S, Tifouti L. Leaching of copper oxide with different acid solutions. Chem. Eng. J., 2009, 152(2–3): 503.

[8]

Melchiorre EB, Huss GR, Lopez A. Carbon and hydrogen stable isotope microanalysis and data correction for rare carbonate minerals: case studies for stichtite (Mg6Cr2[(OH)16">CO3]·H2O) and malachite (Cu2CO3(OH)2). Chem. Geol., 2014, 367, 63.

[9]

Bingöl D, Canbazoğlu M. Dissolution kinetics of malachite in sulphuric acid. Hydrometallurgy, 2004, 72(1–2): 159.

[10]

Naderi H, Abdollahy M, Mostoufi N, Koleini MJ, Shojaosadati SA, Manafi Z. Kinetics of chemical leaching of chalcopyrite from low grade copper ore: behavior of different size fractions. Int. J. Miner. Metall. Mater., 2011, 18(6): 638.

[11]

Liu ZX, Yin ZL, Hu HP, Chen QY. Leaching kinetics of low-grade copper ore containing calcium-magnesium carbonate in ammonia-ammonium sulfate solution with persulfate. Trans. Nonferrous Met. Soc. China, 2012, 22(11): 2822.

[12]

Helle S, Kelm U. Experimental leaching of atacamite, chrysocolla and malachite: relationship between copper retention and cation exchange capacity. Hydrometallurgy, 2005, 78, 180.

[13]

Ata ON, Çolak S, Ekinci Z, Çopur M. Determination of the optimum conditions for leaching of malachite ore in H2SO4 solutions. Chem. Eng. Technol., 2001, 24(4): 409.

[14]

Mena M, Olson F. Leaching of chrysocolla with ammonia-ammonium carbonate solutions. Metall. Trans. B, 1985, 16(3): 441.

[15]

Oudenne PD, Olson FA. Leaching kinetics of malachite in ammonium carbonate solutions. Metall. Trans. B, 1983, 14(1): 33.

[16]

Künkül A, Kocakerim MM, Yapici S, Demirbag A. Leaching kinetics of malachite in ammonia solutions. Int. J. Miner. Process., 1994, 41(3-4): 167.

[17]

Wang X, Chen QY, Hu HP, Yin ZL, Xiao ZL. Solubility prediction of malachite in aqueous ammoniacal ammonium chloride solutions at 25°C. Hydrometallurgy, 2009, 99(3-4): 231.

[18]

Çalban T, Çolak S, Yeşilyurt M. Optimization of leaching of copper from oxidized copper ore in NH3-(NH4)2SO4 medium. Chem. Eng. Commun., 2005, 192(11): 1515.

[19]

Ekmekyapar A, Aktaş E, Künkül A, Demirkiran N. Investigation of leaching kinetics of copper from malachite ore in ammonium nitrate solutions. Metall. Mater. Trans. B, 2012, 43(4): 764.

[20]

Awakura Y, Hirato T, Kagawa A, Yamada Y, Majima H. Dissolution of malachite in aqueous ethylenediaminetetraacetate solution. Metall. Trans. B, 1991, 22, 569.

[21]

Wu DD, Wen SM, Yang J, Deng JS, Jiang L. Dissolution kinetics of malachite as an alternative copper source with an organic leach reagent. J. Chem. Eng. Jpn., 2013, 46(10): 677.

[22]

Ameen S, Ali V, Zulfequar M, Haq MM, Husain M. Electrical conductivity and dielectric properties of sulfamic acid doped polyaniline. Curr. Appl Phys., 2007, 7(2): 215.

[23]

Xiong FJ, Zhou DB, Xie ZP, Chen YY. A study of the Ce3+/Ce4+ redox couple in sulfamic acid for redox battery application. Appl. Energy, 2012, 99, 291.

[24]

Yadav JS, Rao P P, Sreenu D, Rao R S, Kumar V N, Nagaiah K, Prasad AR. Sulfamic acid: an efficient, cost-effective and recyclable solid acid catalyst for the Friedlander quinoline synthesis. Tetrahedron Lett., 2005, 46(42): 7249.

[25]

De SK. Sulfamic acid as a novel, efficient, cost-effective, and reusable solid acid catalyst for the synthesis of pyrroles under solvent-free conditions. Synth. Commun., 2008, 38(5): 803.

[26]

Sass RL. A neutron diffraction study on the crystal structure of sulfamic acid. Acta Crystallogr., 1960, 13(4): 320.

[27]

Kanda FA, King AJ. The crystal structure of sulfamic acid. J. Am. Chem. Soc., 1951, 73(5): 2315.

[28]

Yi QF. Automatic generation of potential-pH diagrams for the Cu-NH3-H2O system using concentration comparison. J. Xiantan Min. Inst., 2000, 15(2): 57.

[29]

Dickinson CK, Heal GR. Solid-liquid diffusion controlled rate equations. Thermochim. Acta, 1999, 340–341, 89.

[30]

Levenspiel O. Chemical Reaction Engineering, 1972, New York, Wiley, 2.

[31]

Sekhukhune LM, Ntuli F, Muzenda E. Atmospheric oxidative and non-oxidative leaching of Ni-Cu matte by acidified ferric chloride solution. J. S. Afr. Inst. Min. Metall., 2014, 114(5): 401.

AI Summary AI Mindmap
PDF

128

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/