Saturation phenomenon of Ce and Ti in the modification of Al-Zn-Si filler metal

Abstract

Cerium and titanium were added to an Al-42Zn-6.5Si brazing alloy, and the subsequent microstructures of the brazing alloy and the 6061 Al alloy brazing seam were investigated. The microstructures of filler metals and brazed joints were characterized by scanning electron microscopy and X-ray energy dispersion spectrometry. A new Ce-Ti phase formed around the silicon phase in the modified filler metal and this saturation phenomenon was analyzed. Interestingly, following brazing of the 6061 alloy, there is no evidence of the Ce-Ti phase in the brazing seam. Because of the mutual solubility of the brazing alloy and base metal, the quantity of the solvent increases, and the solute Ce and Ti atoms assume an undersaturated state.

Keywords

filler metals / aluminum alloys / brazing / cerium / titanium / saturation

References

[1] Chang SY, Tsao LC, Li TY, Chuang TH. Joining 6061 aluminum alloy with Al-Si-Cu filler metals. J. Alloys Compd., 2009, 488(1): 174.

[2] Shi YW, Yu Y, Li YP, Xia ZD, Lei YP, Li XY, Guo F. Study on the Microstructure and wettability of an Al-Cu-Si braze containing small amounts of rare earth erbium. J. Mater. Eng. Perform., 2009, 18(3): 278.

[3] Chang SY, Tsao LC, Lei YH, Mao SM, Huang CH. Brazing of 6061 aluminum alloy/Ti-6Al-4V using Al-Si-Cu-Ge filler metals. J. Mater. Process. Technol., 2012, 212(1): 8.

[4] He P, Liu YZ, Liu D. Interfacial microstructure and forming mechanism of brazing C _f/Al composite with Al-Si filler. Mater. Sci. Eng. A, 2006, 422(1–2): 333.

[5] Dai W, Xue SB, Lou JY, Lou YB, Wang SQ. Torch brazing 3003 aluminum alloy with Zn-Al filler metal. Trans. Nonferrous Met. Soc. China, 2012, 22(1): 30.

[6] Xu ZW, Yan JC, Wang C, Yang SQ. Substrate oxide undermining by a Zn-Al alloy during wetting of alumina reinforced 6061 Al matrix composite. Mater. Chem. Phys., 2008, 112(3): 831.

[7] Nagaoka T, Morisada Y, Fukusumi M, Takemoto T. Ultrasonic-assisted soldering of 5056 aluminum alloy using quasi-melting Zn-Sn alloy. Metall. Mater. Trans. B, 2010, 412(4): 864.

[8] Dai W, Xue SB, Ji F, Lou J, Sun B, Wang SQ. Brazing 6061 aluminum alloy with Al-Si-Zn filler metals containing Sr. Int. J. Miner. Metall. Mater., 2013, 20(4): 365.

[9] Dai W, Xue SB, Lou JY, Wang SQ. Development of Al-Si-Zn-Sr filler metals for brazing 6061 aluminum alloy. Mater. Des., 2012, 42, 395.

[10] Hao YL, Li SJ, Sun SY, Yang R. Effect of Zr and Sn on Young’s modulus and superelasticity of Ti-Nb-based alloys. Mater. Sci. Eng. A., 2006, 441(1–2): 112.

[11] Zhao Y, Feng Y, Huang DX, Machi T, Cheng CH, Nakao K, Chikumoto N, Fudamoto Y, Koshizuka N, Murakami M. Doping effect of Zr and Ti on the critical current density of MgB₂ bulk superconductors prepared under ambient pressure. Phys. C, 2002, 378-381, 122.

[12] Yang MB, Cheng L, Pan FS. Comparison about effects of Ce, Sn and Gd additions on as-cast microstructure and mechanical properties of Mg-3.8Zn-2.2Ca (wt%) magnesium alloy. J. Mater. Sci., 2009, 44(17): 4577.

[13] Greer AL, Bunn AM, Tronche A, Evans PV, Bristow DJ. Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al-Ti-B. Acta Mater., 2000, 48(11): 2823.

[14] Asensio-Lozano J, Suarez-Peña B. Effect of the addition of refiners and/or modifiers on the microstructure of die cast Al-12Si alloys. Scripta Mater., 2006, 54(5): 943.

[15] Li PJ, Kandalova EG, Nikitin VI, Makarenko AG, Luts AR, Zhang YF. Preparation of Al-TiC composites by self-propagating high-temperature synthesis. Scripta Mater., 2003, 49(7): 699.

[16] Liao HC, Sun GX. Mutual poisoning effect between Sr and B in Al-Si casting alloys. Scripta Mater., 2003, 48(8): 1035.

[17] Gao LL, Xue SB, Zhang L, Sheng Z, Ji F, Dai W, Yu SL, Zeng G. Effect of alloying elements on properties and microstructures of SnAgCu solders. Microelectron. Eng., 2010, 87(11): 2025.

[18] Zhang L, Xue SB, Gao LL, Chen Y, Yu SL, Sheng Z, Zeng G. Microstructure and creep properties of Sn-Ag-Cu lead-free solders bearing minor amounts of the rare earth cerium. Soldering Surf. Mount Technol., 2010, 22(2): 30.

[19] Xiao DH, Wang JN, Ding DY, Yang HL. Effect of rare earth Ce addition on the microstructure and mechanical properties of an Al-Cu-Mg-Ag alloy. J. Alloys Compd., 2003, 352(1–2): 84.

[20] Ji F, Xue SB, Dai W. Reliability studies of Cu/Al joints brazed with Zn-Al-Ce filler metals. Mater. Des., 2012, 42, 156.

[21] Zeren M, Karakulak E. Microstructural chracterisation of Al-Si-xTi cast alloys. Mater. Sci. Technol., 2009, 25(10): 1211.

[22] Cao XJ, Campbell J. Morphology of β-Al5FeSi phase in Al-Si cast alloys. Mater. Trans., 2006, 47(5): 1303.

[23] Gao LL, Xue SB, Zhang L, Sheng Z, Zeng G, Ji F. Effects of trace rare earth Nd addition on microstructure and properties of SnAgCu solder. J. Mater. Sci. Mater. Electron, 2010, 21(7): 643.

[24] Xie HX, Chawla N, Shen YL. Mechanisms of deformation in high-ductility Ce-containing Sn-Ag-Cu solder alloys. Microelectron. Reliab., 2011, 51(6): 1142.