Kinetic study of austenite formation during continuous heating of unalloyed ductile iron

Abstract

The austenite formation kinetics in unalloyed cast ductile iron was studied on the basis of dilatometry measurements, and Avrami’s equation was used to estimate the material’s kinetic parameters. A continuous heating transformation diagram was constructed using heating rates in the range of 0.06 to 0.83°C·s⁻¹. As the heating rate was augmented, the critical temperatures, A _c1 and A _α, as well as the intercritical range, which was evaluated as the difference between the critical temperatures, ΔT = A _α − A _c1, increased. At a low heating rate, the kinetics of austenite formation was slow as a consequence of the iron’s silicon content. The effect of heating rate on k and n, the kinetic parameters of Avrami’s equation, was also determined. Parameter n, which is associated with nucleation sites and growth geometry, decreased with an increase in heating rate. In addition, parameter k increased with the increase of heating rate, suggesting that the nucleation and growth rates are carbon- and silicon-diffusion controlled during austenite formation under continuous heating.

Keywords

ductile iron / austenite / continuous heating / heating rate / kinetics / dilatometry

References

[1] Pérez MJ, Cisneros MM, Almanza E, Haro S. Kinetic study of the austempering reactions in ductile irons. J. Mater. Eng. Perform., 2012, 21(11): 2460.

[2] Martín D S, Rivera-Díaz-del-Castillo PEJ, García-de-Andrés C. In situ study of austenite formation by dilatometry in a low carbon microalloyed steel. Scripta Mater., 2008, 58(10): 926.

[3] Katsamas AI. A computational study of austenite formation kinetics in rapidly heated steels. Surf. Coat. Technol., 2007, 201(14): 6414.

[4] García de Andrés C, Caballero FG, Capdevila C, Álvarez LF. Application of dilatometric analysis to the study of solid-solid phase transformations in steels. Mater. Charact., 2002, 48(1): 101.

[5] Chang M, Yu H. Kinetics of bainite-to-austenite transformation during continuous reheating in low carbon microalloyed steel. Int. J. Miner. Metall. Mater., 2013, 20(5): 427.

[6] Oliveira FLG, Andrade MS, Cota AB. Kinetics of austenite formation during continuous heating in a low carbon steel. Mater. Charact., 2007, 58(3): 256.

[7] Mohanty RR, Girina OA, Fonstein NM. Effect of heating rate on the austenite formation in low-carbon high-strength steels annealed in the intercritical region. Metall. Mater. Trans. A, 2011, 42(12): 3680.

[8] Batra U, Ray S, Prabhakar SR. Mathematical model for austenitization kinetics of ductile iron. J. Mater. Eng. Perform., 2005, 14(5): 574.

[9] Shtansky DV, Nakai K, Ohmori Y. Pearlite to austenite transformation in an Fe-2.6Cr-1C alloy. Acta Mater., 1999, 47(9): 2619.

[10] Lacaze J, Gerval V. Modelling of the eutectoid reaction in spheroidal graphite Fe-C-Si alloys. ISIJ Int., 1998, 38(7): 714.

[11] Atkinson C, Akbay T, Reed RC. Theory for reaustenitisation from ferrite/cementite mixtures in Fe-C-X steels. Acta Metall. Mater., 1995, 43, 2013.

[12] Hernández-Morales B, Vázquez-Gómez O, López-Martínez E, Vergara-Hernández HJ, Olmos L. Effect of heating rate and silicon content on kinetics of austenite formation during continuous heating. Mater. Sci. Forum, 2014, 783–786, 771.

[13] Avrami M. Kinetics of phase change: II. Transformation-time relations for random distribution of nuclei. J. Chem. Phys., 1940, 8, 212.

[14] Abdollahi P, Amirsadeghi A, Kheirandish S, Mirdamadi S. Formation kinetics of austenite in pearlitic ductile iron. Int. J. Miner. Metall. Mater., 2012, 19(6): 506.

[15] Howell PR. The pearlite reaction in steels mechanisms and crystallography. Mater. Charact., 1998, 40(4–5): 227.