Comparative study of 2mol% Li- and Mn-substituted lead-free potassium sodium niobate ceramics

Asha Dahiya , O. P. Thakur , J. K. Juneja , Sangeeta Singh , Dipti

International Journal of Minerals, Metallurgy, and Materials ›› 2014, Vol. 21 ›› Issue (12) : 1241 -1246.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2014, Vol. 21 ›› Issue (12) : 1241 -1246. DOI: 10.1007/s12613-014-1033-3
Article

Comparative study of 2mol% Li- and Mn-substituted lead-free potassium sodium niobate ceramics

Author information +
History +
PDF

Abstract

The effect of Li and Mn substitution on the dielectric, ferroelectric and piezoelectric properties of lead free K0.5Na0.5NbO3 (KNN) was investigated. Samples were prepared using a conventional solid state reaction method. The sintering temperature for all the samples was 1050°C. The optimum doping concentration for the enhancement of different properties without the introduction of any other co-dopants such as Ti, Sb, and La was investigated. X-ray diffraction analysis confirmed that all the samples crystallize in a single phase perovskite structure. The dielectric properties were investigated as a function of temperature and applied electric field frequency. Compared with Li-substituted KNN (KLNN), Mn-substituted KNN (KMNN) exhibited a higher dielectric constant ɛ max (i.e., 4840) at its critical transition temperature T c (i.e., 421°C) along with a lower value of tangent loss at 10 kHz and greater values of saturation polarisation P s (i.e., 20.14 μC/cm2) and remnant polarisation P r (i.e., 15.48 μC/cm2). The piezoelectric constant (d 33) of KMNN was 178 pC/N, which is comparable to that of lead-based hard ceramics. The results presented herein suggest that B-site or Mn substitution at the optimum concentration results in good enhancement of different properties required for materials used in memory devices and other applications.

Keywords

ceramics / dielectric properties / ferroelectricity / piezoelectricity / substitution / comparative study

Cite this article

Download citation ▾
Asha Dahiya, O. P. Thakur, J. K. Juneja, Sangeeta Singh, Dipti. Comparative study of 2mol% Li- and Mn-substituted lead-free potassium sodium niobate ceramics. International Journal of Minerals, Metallurgy, and Materials, 2014, 21(12): 1241-1246 DOI:10.1007/s12613-014-1033-3

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Ichiki M, Zhang L, Tanaka M, Maeda R. Electrical properties of piezoelectric sodium-potassium niobate. J. Eur. Ceram. Soc., 2004, 24(6): 1693.

[2]

Maeda T, Takiguchi N, Ishikawa M, Hemsel T, Morita T. (K,Na)NbO3 lead-free piezoelectric ceramics synthe sized from hydrothermal powders. Mater. Lett., 2010, 64(2): 125.

[3]

J. Appl. Phys., 2010, 108(9)

[4]

J. Appl. Phys., 2010, 107(3)

[5]

Yang W, Zhou Z, Yang B, Zhang R, Wang Z, Chen H, Jiang Y. Structure and piezoelectric properties of Fe-doped potassium sodium niobate tantalate lead-free ceramics. J. Am. Ceram. Soc., 2011, 94(8): 2489.

[6]

Gao F, Liu L, Xu B, Hu GX, Cao X, Hong R, Tian C. Texture development and dielectric relaxor behavior of 0.80Na0.5Bi0.5TiO3-0.20K0.5Bi0.5TiO3 ceramics templated by plate-like NaNbO3 particles. J. Eur. Ceram. Soc., 2011, 31(15): 2987.

[7]

Chu SY, Water W, Juang YD, Liaw JT, Dai SB. Piezoelectric and dielectric characteristics of lithium potassium niobate ceramic system. Ferroelectrics, 2003, 297, 11.

[8]

Wang RP, Xie RJ, Sekiya T, Shimojo Y. Fabrication and characterization of potassium-sodium niobate piezoelectric ceramics by sparks-plasma-sintering method. Mater. Res. Bull., 2004, 39(11): 1709.

[9]

J. Appl. Phys., 2011, 110(10)

[10]

Gusakova LG, Ishchuk VM, Kisel NG, Kuzenko DV, Spiridonov NA. Modified potassium-sodium niobate based lead-free piezoceramics. Funct. Mater., 2010, 17(4): 528.

[11]

Smeltere I, Antonova M, Kalvane A, Grigs O, Livinsh M. The effect of dopants on sintering and microstructure of lead-free KNN ceramics. Mater. Sci., 2011, 17(1): 62.

[12]

Bhatt SC, Singh K, Uniyal M, Prakash O, Singh PK, Sexena R, Semwal BS. Temperature dependence of dielectric properties of sodium potassium niobate ceramics. Indian J. Pure Appl. Phys., 2007, 45, 609.

[13]

Lim JB, Jeong YH, Kim MH, Suvorov D, Jeon JH. Effect of K/Na ratio on piezoelectric properties of modified (K1−x Nax)NbO3 “Hard” lead-free piezoelectrics. Ceram. Int., 2012, 38(3): 2605.

[14]

Nautiyal OP, Bhatt SC, Pant RP, Semwal BS. Dielectric properties of silver sodium niobate mixed ceramic system. Indian J. Pure Appl. Phys., 2010, 48(5): 357.

[15]

Wongsaenmai S, Ananta S, Yimnirun R. Effect of Li addition on phase formation behavior and electrical properties of (K0.5Na0.5)NbO3 lead free ceramics. Ceram. Int., 2012, 38(1): 147.

[16]

Jaffe B, Cook WR Jr. Jaffe H. Piezoelectric Ceramics, 1971, New York, Academic Press, 72.

[17]

Uchino K. Ferroelectric Devices, 2000, New York, CRC Press, 126.

[18]

Rani R, Sharma S, Rai R, Kholkin AL. Doping effects of Li-Sb content on the structure and electrical properties of [(Na0.5 K0.5)1−x(Li)x(Sb)x(Nb)1 − xO3] lead-free piezoelectric ceramics. Mater. Res. Bull., 2012, 47(2): 381.

AI Summary AI Mindmap
PDF

127

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/