Desulfurization ability of refining slag with medium basicity

Abstract

The desulfurization ability of refining slag with relative lower basicity (B) and Al₂O₃ content (B = 3.5–5.0; 20wt%–25wt% Al₂O₃) was studied. Firstly, the component activities and sulfide capacity (C _S) of the slag were calculated. Then slag-metal equilibrium experiments were carried out to measure the equilibrium sulfur distribution (L _S). Based on the laboratorial experiments, slag composition was optimized for a better desulfurization ability, which was verified by industrial trials in a steel plant. The obtained results indicated that an MgO-saturated CaO-Al₂O₃-SiO₂-MgO system with the basicity of about 3.5–5.0 and the Al₂O₃ content in the range of 20wt%–25wt% has high activity of CaO (a _CaO), with no deterioration of C _S compared with conventional desulfurization slag. The measured L _S between high-strength low-alloyed (HSLA) steel and slag with a basicity of about 3.5 and an Al₂O₃ content of about 20wt% and between HSLA steel and slag with a basicity of about 5.0 and an Al₂O₃ content of about 25wt% is 350 and 275, respectively. The new slag with a basicity of about 3.5–5.0 and an Al₂O₃ content of about 20wt% has strong desulfurization ability. In particular, the key for high-efficiency desulfurization is to keep oxygen potential in the reaction system as low as possible, which was also verified by industrial trials.

Keywords

high-strength steel / low alloyed steel / refining / slag / basicity / desulfurization / thermodynamic calculations

References

[1] Wang XH. Discussion on proper refining process for plate. Proceedings of National Steelmaking-Continuous Casting Technology Meeting, 2008 14

[2] Keskinkilic E, Geveci A, Topkaya YA. Desulphurization characteristics of ladle furnace slags of a low sulphur steel. Can. Metall. Q., 2007, 46(4): 391.

[3] Schambron T, Phillips AW, O’Brien DM, Burg J, Pereloma EV, Killmore CC, Williams JA. Thermomechanical processing of pipeline steels with a reduced Mn content. ISIJ Int., 2009, 49(2): 284.

[4] Sosinsky DJ, Sommerville ID. The composition and temperature dependence of the sulfide capacity of metallurgical slags. Metall. Trans. B, 1986, 17(2): 331.

[5] Young RW, Duffy JA, Hassall GJ, Xu Z. Use of the optical basicity concept for determining phosphorus and sulphur slag-metal partitions. Ironmaking Steelmaking, 1992, 19(3): 201

[6] Taniguchi Y, Sano N, Seetharaman S. Sulphide capacities of CaO-Al₂O₃-SiO₂-MgO-MnO slags in the temperature range 1673–1773 K. ISIJ Int., 2009, 49(2): 156.

[7] Nzotta MM, Du SC, Seetharaman S. A study of the sulfide capacities of iron-oxide containing slags. Metall. Mater. Trans. B, 1999, 30(5): 909.

[8] Shi CB, Yang XM, Jiao JS, Li C, Guo HJ. A sulphide capacity prediction model of CaO-SiO₂-MgO-Al₂O₃ ironmaking slags based on the ion and molecule coexistence theory. ISIJ Int., 2010, 50(10): 1362.

[9] Chen YF, Wang Y. Study on distribution ratio of sulphur between CaO-SiO₂-MgO-Al₂O₃ molten slag and liquid steel. The 6th CSM Annual Meeting Proceedings, Chengdu, 2007 20

[10] Ban-Ya S, Hobo M, Kaji T, Itoh T, Hino M. Sulphide capacity and sulphur solubility in CaO-Al₂O₃ and CaO-Al₂O₃-CaF₂ slags. ISIJ Int., 2004, 44(11): 1810.

[11] Hao N. Study on the Production Process of Ultra-low Sulfur Steel and the Desulfurization Reaction during Secondary Refining, 2007, Beijing, University of Science and Technology Beijing, 25

[12] Andersson M, Hallberg M, Jonsson L, Jönsson P. Slag-metal reactions during ladle treatment with focus on desulphurisation. Ironmaking Steelmaking, 2002, 29(3): 224.

[13] Ogura Y, Kikuchi Y, Hasegawa T, Matsuo K, Taguchi K, Hanmyo M. Development of secondary refining process and its application to production of clean steel. Tetsu-to-Hagane, 1986, 72(9): 1309

[14] Bannenberg N, Nergmann B. Combined decrease of sulphur, nitrogen, hydrogen and total oxygen in only one secondary steelmaking operation. Proceedings of the 6th International Iron and Steel Congress, Nagoya, 1990 603

[15] Chen WJ, Chen JS, Zheng JZ, Tong G. Production practice of ultra-low sulphur steel at Baosteel. The 7th CSM Annual Meeting Proceedings, Beijing, 2009 1142

[16] Zhu GS, Li HB, Li BH, Wang XH, Yang J, Kang XM. Formation mechanism and control of inclusions in X80 pipeline coils. Proceedings of the 5th International Congress on the Science and Technology of Steelmaking, Dresden, 2012

[17] Wang XH, Li XG, Li Q, Huang FX, Li HB, Yang J. Control of stringer shaped non-metallic inclusions of CaO-Al₂O₃ system in API X80 linepipe steel plates. Steel Res. Int., 2014, 85(2): 155.

[18] Li Q, Wang XH, Li HB, Huang FX, Yang J, Wang WJ. Variation of non-metallic inclusions composition in X80 pipeline steel refined by high basicity slag. J. Iron Steel Res. Int., 2011, 18(Suppl.1): 563

[19] Son JH, Jung IH, Jung SM, Gaye H, Lee HG. Chemical reaction of glazed refractory with Al-deoxidized molten steel. ISIJ Int., 2008, 48(11): 1542.

[20] Wang XH, Jiang M, Chen B, Li HB. Study on formation of non-metallic inclusions with lower melting temperatures in extra low oxygen special steels. Sci. China Technol. Sci., 2012, 55(7): 1863.

[21] Yu HX, Wang XH, Zhang J, Li HB, Wang WJ. Cleanliness of alloying structural steel. J. Iron Steel Res. Int., 2011, 18(12): 6.

[22] Xu SL, Jin LS, Wang Q, Meng FY. Improvement of ladle furnace desulfurizing technics. China Metall., 2009, 19(7): 28

[23] Wang XZ, Liu HQ, Wang SZ, Song SG, Zhang YQ. Process analysis of deep desulphurization and controlling nitrogen and inclusions of X70 pipeline steel. Iron Steel, 2011, 46(8): 25

[24] Li J, Rong GP, Wang XL, Hu CL, Wang GL. Experimental study of ladle furnace desulphurization with CaO-Al₂O₃-SiO₂ based refining slag. Steelmaking, 2013, 29(1): 48

[25] Takahashi D, Kamo M, Kurose Y, Nomura H. Deep steel desulphurisation technology in ladle furnace at KSC. Ironmaking Steelmaking, 2003, 30(2): 116.