Fabrication of solid-phase-sintered SiC-based composites with short carbon fibers

Abstract

Solid-phase-sintered SiC-based composites with short carbon fibers (Csf/SSiC) in concentrations ranging from 0 to 10wt% were prepared by pressureless sintering at 2100°C. The phase composition, microstructure, density, and flexural strength of the composites with different Csf contents were investigated. SEM micrographs showed that the Csf distributed in the SSiC matrix homogeneously with some gaps at the fiber/matrix interfaces. The densities of the composites decreased with increasing Csf content. However, the bending strength first increased and then decreased with increasing Csf content, reaching a maximum value of 390 MPa at a Csf content of 5wt%, which was 60 MPa higher than that of SSiC because of the pull-out strengthening mechanism. Notably, Csf was graphitized and damaged during the sintering process because of the high temperature and reaction with boron derived from the sintering additive B₄C; this graphitization degraded the fiber strengthening effect.

Keywords

fiber-reinforced composites / silicon carbide / carbon fibers / solid phase sintering / microstructure

References

[1] Smith CE, Morscher GN, Xia ZH. Monitoring damage accumulation in ceramic matrix composites using electrical resistivity. Scripta Mater., 2008, 59(4): 463.

[2] Mei H, Cheng LF. Stress-dependence and time-dependence of the post-fatigue tensile behavior of carbon fiber reinforced SiC matrix composites. Compos. Sci. Technol., 2011, 71(11): 1404.

[3] Schmidt S, Beyer S, Knabe H, Immich H, Meistring R, Gessler A. Advanced ceramic matrix composite materials for current and future propulsion technology applications. Acta Astronaut., 2004, 55(3-9): 409.

[4] Tu WC, Lange FF, Evans AG. Concept for a damagetolerant ceramic composite with “strong” interfaces. J. Am. Ceram. Soc., 1996, 79(2): 417.

[5] Li Z, Xiao P, Xiong X. Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction. Int. J. Miner. Metall. Mater., 2010, 17(4): 500.

[6] Lee JS, Yoshida K, Yano T. Influence of fiber volume fraction on the mechanical and thermal properties of unidirectionally aligned short-fiber-reinforced SiC composites. J. Ceram. Soc. Jpn., 2002, 110(1287): 985.

[7] Zhang YM, Zhang YL, Han JC, Hu LY. The effect of sintering additive on fracture behavior of carbon-whisker-reinforced silicon carbide composites. Mater. Sci. Eng. A, 2008, 480(1–2): 62.

[8] Zhang YM, Zhang YL, Han JC, Zhou YF, Hu LY, Yao W, Qu W. The effect of annealing temperature on microstructure and mechanical properties of C/SiC composites. Mater. Sci. Eng. A, 2008, 497(1–2): 383.

[9] Zhang YL, Zhang YM, Han JC, Han YY, Yao W. Fabrication of toughened Cf/SiC whisker composites and their mechanical properties. Mater. Lett., 2008, 62(17–18): 2810.

[10] He XL, Guo YK, Yu ZM, Zhou Y, Jia DC. Study on microstructures and mechanical properties of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing. Mater. Sci. Eng. A, 2009, 527(1-2): 334.

[11] He XL, Guo YK, Zhou Y, Jia DC. Microstructures of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing. Mater. Charact., 2008, 59(12): 1771.

[12] Tang HL, Zeng XR, Xiong XB, Li L, Zou JZ. Mechanical and tribological properties of short-fiber-reinforced SiC composites. Tribol. Int., 2009, 42(6): 823.

[13] Keppeler M, Reichert HG, Broadley JM, Thurn G, Wiedmann I, Aldinger F. High temperature mechanical behaviour of liquid phase sintered silicon carbide. J. Eur. Ceram. Soc., 1998, 18(5): 521.

[14] Yao XM, Liang HQ, Liu XJ, Huang ZR. Effect of carbon source and adding ratio on the microstructure and properties of solid-state sintering silicon carbide. J. Inorg. Mater., 2013, 28(9): 1009.

[15] Fuso L, Manfredi D, Biamino S, Pavese M, Fino P, Badini C. SiC-based multilayered composites containing short carbon fibres obtained by tape casting. Compos. Sci. Technol., 2009, 69(11–12): 1772.

[16] Yang WS, Biamino S, Padovano E, Fuso L, Pavese M, Marchisio S, Vasquez D, Bolivar C V, Fino P, Badini C. Microstructure and mechanical properties of short carbon fibre/SiC multilayer composites prepared by tape casting. Compos. Sci. Technol., 2012, 72(6): 675.

[17] Liu FJ, Wang HJ, Xue LB, Fan LD, Zhu ZP. Effect of microstructure on the mechanical properties of PAN-based carbon fibers during high-temperature graphitization. J. Mater. Sci., 2008, 43(12): 4316.

[18] Yang FY, Zhang XH, Han JC, Du SY. Characterization of hot-pressed short carbon fiber reinforced ZrB₂-SiC ultra-high temperature ceramic composites. J. Alloys Compd., 2009, 472(1–2): 395.

[19] Rellick GS, Zaldivar RJ, Yang JM, Kobayashi RW. Boron migration in boron-doped carbon/carbon composites. Carbon, 1992, 30(4): 711.

[20] Lowell CE. Solid solution of boron in graphite. J. Am. Ceram. Soc., 1967, 50(3): 142.

[21] Marshall DB, Cox BN, Evans AG. The mechanics of matrix cracking in brittle-matrix fiber composites. Acta Metall., 1985, 33(11): 2013.

[22] Borom MP, Johnson CA. Thermomechanical mismatch in ceramic-fiber-reinforced glass-ceramic composites. J. Am. Ceram. Soc., 1987, 70(1): 1.

[23] Dusza J, Steen M. Fractography and fracture mechanics property assessment of advanced structural ceramics. Int. Mater. Rev., 1999, 44(5): 165.