Effect of boron addition on the microstructure and stress-rupture properties of directionally solidified superalloys

Abstract

This study is focused on the effect of boron addition, in the range of 0.0007wt% to 0.03wt%, on the microstructure and stress-rupture properties of a directionally solidified superalloy. With increasing boron content in the as-cast alloys, there is an increase in the fraction of the γ′/γ eutectic and block borides precipitate around the γ′/γ eutectic. At a high boron content of 0.03wt%, there is precipitation of lamellar borides. Upon heat treatment, fine block borides tend to precipitate at grain boundaries with increasing boron content. Overall, the rupture life of the directionally solidified superalloy is significantly improved with the addition of nominal content of boron. However, the rupture life decreases when the boron content exceeds 0.03wt%.

Keywords

superalloys / directional solidification / microstructure / boron / stress-rupture properties

References

[1] Sellamuthu R, Giamei AF. Measurement of segregation and distribution coefficients in MAR-M200 and hafnium-modified MAR-M200 superalloys. Metall. Trans. A, 1986, 17(3): 419.

[2] Wills VA, McCartney DG. A comparative study of solidification features in nickel-base superalloys: microstructural evolution and microsegregation. Mater. Sci. Eng. A, 1991, 145(2): 223.

[3] Shulga AV. Boron and carbon behavior in the cast Ni-base superalloy EP962. J. Alloys Compd., 2007, 436(1–2): 155.

[4] Cutler ER, Wasson AJ, Fuchs GE. Effect of minor alloying additions on the carbide morphology in a single crystal Ni-base superalloy. Scripta Mater., 2008, 58(2): 146.

[5] Huang SC, Taub AI, Chang KM. Boron extended solubility and strengthening potency in rapidly solidified Ni3Al. Acta Metall., 1984, 32(10): 1703.

[6] Baker I, Huang B, Schulson EM. The effect of boron on the lattice properties of Ni₃Al. Acta Metall., 1998, 36(3): 493.

[7] Liu CT, White CL, Horton JA. Effect of boron on grain-boundaries in Ni₃Al. Acta Metall., 1985, 33(2): 213.

[8] Guo JT, Li H, Sun C, Wang SH, Ren DG, Xiong LY, Jiang J. Behaviour of boron in poly- and monocrystalline Ni₃Al and its effect strength at room and high temperature. Mater. Sci. Eng. A, 1992, 152(1–2): 120

[9] Khadkikar PS, Vedula K, Shabel BS. The role of boron in ductilizing Ni₃Al. Metall. Trans. A, 1987, 18(3): 425.

[10] Muller DA, Subramanian S, Batson PE, Silcox J, Sass SL. Structure, chemistry and bonding at grain boundaries in Ni₃Al: I. The role of boron in ductilizing grain boundaries. Acta. Mater., 1996, 44(4): 1637.

[11] Hu Q, Liu L, Zhao XB, Gao SF, Zhang J, Fu HZ. Effect of carbon and boron additions on segregation behavior of directionally solidified nickel-base superalloys with rhenium. Trans. Nonferrous Met. Soc. China, 2013, 23(11): 3257.

[12] Yan BC, Zhang J, Lou LH. Effect of boron additions on the microstructure and transverse properties of a directionally solidified superalloy. Mater. Sci. Eng. A, 2008, 474(1–2): 39.

[13] Cadel E, Lemarchand D, Chambrel S, Blavette D. Atom probe tomography investigation of the microstructure of superalloys N18. Acta Mater., 2002, 50(5): 957.

[14] Mukherji D, Rösler J, Krüger M, Heilmaier M, Bölitz MC, Völkl R, Glatzel U, Szentmiklósi L. The effects of boron addition on the microstructure and mechanical properties of Co-Re-based high-temperature alloys. Scripta Mater., 2012, 66(1): 60.

[15] Huang X, Chaturvedi MC, Richards NL, Jackman J. The effect of grain boundary segregation of boron in cast alloy 718 on HAZ microfissuring: a SIMS analysis. Acta Mater., 1997, 45(8): 3095.

[16] Chen W, Chaturvedi MC, Richards NL, McMahon G. Grain boundary segregation of boron in INCONEL 718. Metall. Mater. Trans. A, 1998, 29(7): 1947.

[17] Blavette D, Duval P, Letellier L, Guttmann M. Atomic-scale APFIM and TEM investigation of grain boundary microchemistry in astroloy nickel base superalloys. Acta Mater., 1996, 44(12): 4995.

[18] Letellier L, Bostel A, Blavette D. Direct observation of boron segregation at grain boundaries in astrology by 3D atomic tomography. Scripta Metall. Mater., 1994, 30(12): 1503.

[19] Walsh JM, Rear BH. Direct evidence for boron segregation to grain boundaries in a nickel-base alloy by secondary ion mass spectrometry. Metall. Trans. A, 1975, 6(1): 226.