Effect of magnesium addition on inclusions in H13 die steel

Abstract

The effect of magnesium addition on the number, morphology, composition, size, and density of inclusions in H13 die steel was studied. The results show that the total oxygen content in the steel can be significantly decreased to 0.0008wt%. Al₂O₃ and MnS inclusions are changed into nearly spherical MgO·Al₂O₃ spinel and spherical MgO·MgS inclusions, respectively. The number of inclusions larger than 1 μm decreases and the number of inclusions smaller than 1 μm increases with increasing magnesium content. V(N,C) precipitates around MgO·Al₂O₃ and MgO·MgS inclusions during solidification of liquid steel. The densities of MgO·Al₂O₃ spinel inclusions are lower than that of alumina inclusions. With increasing magnesium content in the Mg-containing inclusions, the density of inclusions decreases, leading to the improvement of inclusion removal efficiency.

Keywords

die steel / inclusions / magnesium / deoxidation / thermodynamics

References

[1] Yan GH, Huang XM, Wang YQ, Qin XG, Yang M, Chu ZM, Jin K. Effects of heat treatment on mechanical properties of H13 steel. Met. Sci. Heat Treat., 2010, 52(7–8): 393

[2] Klobčar D, Tušek J, Taljat B. Thermal fatigue of materials for die-casting tooling. Mater. Sci. Eng. A, 2008, 472(1–2): 198.

[3] Tripathi N, Du SC. Chemical characterisation of non-metallic inclusions during casting of hot work die steel. Ironmaking Steelmaking, 2006, 33(3): 213.

[4] Chai F, Yang CF, Su H. Effect of magnesium on inclusion formation in Ti-killed steels and microstructural evolution in welding induced coarse-grained heat affected zone. J. Iron. Steel. Res. Int., 2009, 16(1): 69.

[5] Schastlivtsev VM, Tabatchikova TI, Yakovleva IL, Klyueva SY. Effect of structure and nonmetallic inclusions on the intercrystalline fracture of cast steel. Phys. Met. Metallogr., 2013, 114(2): 180.

[6] Yao J, Qu XH, He XB, Zhang L. Effect of inclusion size on the high cycle fatigue strength and failure mode of a high V alloyed powder metallurgy tool steel. Int. J. Miner. Metall. Mater., 2012, 19(7): 608.

[7] Seo WG, Han WH, Kim JS, Pak JJ. Deoxidation equilibria among Mg, Al and O in liquid iron in the presence of MgO·Al₂O₃ spinel. ISIJ Int., 2003, 43(2): 201.

[8] Takata R, Yang J, Kuwabara M. Characteristics of inclusions generated during Al-Mg complex deoxidation of molten steel. ISIJ Int., 2007, 47(10): 1379.

[9] Luo SJ, Su YH, Lu MJ, Kuo JC. EBSD analysis of magnesium addition on inclusion formation in SS400 structural steel. Mater. Charact., 2013, 82, 103.

[10] Park JH, Todoroki HK. Control of MgO·Al₂O₃ spinel inclusions in stainless steels. ISIJ Int., 2010, 50(10): 1333.

[11] Yang J, Okumura KJ, Kuwabara M, Sano M. Behavior of magnesium in the desulfurization process of molten iron with magnesium vapor produced in-situ by aluminothermic reduction of magnesium oxide. ISIJ Int., 2002, 42(7): 685.

[12] Shi CB, Chen XC, Guo HJ, Zhu ZJ, Sun XL. Control of MgO·Al₂O₃ spinel inclusions during protective gas electroslag remelting of die steel. Metall. Mater. Trans. B, 2013, 44(2): 378.

[13] Ohta H, Suito H. Thermodynamics of aluminum and manganese deoxidation equilibria in Fe-Ni and Fe-Cr alloys. ISIJ Int., 2003, 43(9): 1301.

[14] Ohta H, Suito H. Calcium and magnesium deoxidation in Fe-Ni and Fe-Cr alloys equilibrated with CaO-Al₂O₃ and CaO-Al₂O₃-MgO slags. ISIJ Int., 2003, 43(9): 1293.

[15] Fujii K, Nagasaka T, Hino M. Activities of the constituents in spinel solid solution and free energies of formation of MgO, MgO·Al₂O₃. ISIJ Int., 2000, 40(11): 1059.

[16] Todoroki H, Mizuno K. Effect of silica in slag on inclusion compositions in 304 stainless steel deoxidized with aluminum. ISIJ Int., 2004, 44(8): 1350.

[17] Hayashi A, Uenishi T, Kandori H, Miki T, Hino M. Aluminum deoxidation equilibrium of molten Fe-Ni alloy coexisting with alumina or hercynite. ISIJ Int., 2008, 48(11): 1533.

[18] Domanski D, Urretavizcaya G, Castro FJ, Gennari FC. Mechanochemical synthesis of magnesium aluminate spinel powder at room temperature. J. Am. Ceram. Soc., 2004, 87(11): 2020.