Effect of tunnel structure on the specific capacitance of etched aluminum foil

Abstract

The morphology of etched aluminum foil was observed using scanning electron microscopy, which led to the establishment of a cylindrical model and two merged models, considering the fixed weight loss of etching. The maximum of specific capacitance and the corresponding optimum values for tunnel sizes at various anodization voltages were predicted. The increased size distribution and taper of tunnels were demonstrated to decrease the specific capacitance, whereas the addition of polymeric additive into the tunnel widening solution was demonstrated to increase the capacitance. The formation of merged tunnels on the etched aluminum surface, irrespective of the presence of row-merged tunnels or cluster-merged tunnels, resulted in a dramatic decrease in the specific capacitance. It is concluded that, enhancing the uniformity of tunnel size and distribution and avoiding the formation of merged tunnels are the effective approach to achieving the higher capacitance for the tunnel etched and formed aluminum foil.

Keywords

aluminum foil / pitting corrosion / capacitance / morphology / electrolytic capacitors

References

[1] Jang JH, Choi WS, Kim NJ, Lee CH, Kim TY, Park C, Suh SJ. Formation of aluminum tunnel pits arrayed using SU-8 masks with UV-assisted thermal imprint lithography. Microelectron. Eng., 2010, 87(12): 2610.

[2] Yoo JE, Choi J. Electrochemical surface enlargement of a niobium foil for electrolytic capacitor applications. Electrochem. Commun., 2011, 13(3): 298.

[3] Liu ZF, Jin ZG, Li W, Qiu JJ, Zhao J, Liu XX. Synthesis of PS colloidal crystal templates and ordered ZnO porous thin films by dip-drawing method. Appl. Surf. Sci., 2006, 252(14): 5002.

[4] Ono S, Habazaki H. Effect of sulfuric acid on pit propagation behaviour of aluminium under AC etch process. Corros. Sci., 2009, 51(10): 2364.

[5] Amin MA, Abd El Rehim SS, El Sherbini EEF. AC and DC studies of the pitting corrosion of Al in perchlorate solutions. Electrochim. Acta, 2006, 51(22): 4754.

[6] Asoh H, Nakamura K, Ono S. Control of pit initiation sites on aluminum foil using colloidal crystals as mask. Electrochim. Acta, 2007, 53(1): 83.

[7] Liu JC, Zhang XM, Chen MA, Li L, Zhu B, Tang JG, Liu SD. DFT study on surface properties and dissolution trends of Al(100) surfaces doped with Zn, Ga, In, Sn and Pb. Appl. Surf. Sci., 2011, 257(9): 4004.

[8] Zhang XM, Liu JC, Tang JG, Li L, Chen MA, Liu SD, Zhu B. Element segregation on the surfaces of pure aluminum foils. Appl. Surf. Sci., 2010, 256(23): 7300.

[9] Xiao RG, Yan KP. Tunnel morphology of aluminum foil etched by a two-step DC etching method. Corros. Sci., 2008, 50(11): 3256.

[10] Ryu JH, Seo JH, Jeong JH, Kim SK, Lee DN. The effect of aluminum ions on the DC etching of aluminum foil. J. Appl. Electrochem., 2004, 34(9): 879.

[11] Osawa N, Fukuoka K. Pit nucleation behavior of aluminium foil for electrolytic capacitors during early stage of DC etching. Corros. Sci., 2000, 42(3): 585.

[12] Ono S, Habazaki H. Pit growth behaviour of aluminium under galvanostatic control. Corros. Sci., 2011, 53(11): 3521.

[13] Deng B, Jiang YM, Liao JX, Hao YW, Zhong C, Li J. Dependence of critical pitting temperature on the concentration of sulphate ion in chloride-containing solution. Appl. Surf. Sci., 2007, 253(18): 7369.

[14] Dunn CG, Bolon RB, Alwan AS, Stirling AW. A scanning electron microscope study of etched aluminum foil for electrolytic capacitors. J. Electrochem. Soc., 1971, 118(2): 381.

[15] Dunn CG, Bolon RB. Technique for a scanning electron microscope study of etched aluminum. J. Electrochem. Soc., 1969, 116(7): 1050.

[16] Albella JM, Hornillos A, Sanz JM, Martínez-Duart JM. A mathematical approach to the C-V product in aluminum electrolytic capacitors. J. Electrochem. Soc., 1978, 125(12): 1950.

[17] Fickelscher H. Electrolytic tunnel etching of aluminium foil. Mater. Corros., 1982, 33(4): 146.

[18] Liang LB, He YD, Song HZ, Yang XF, Cai XY, Xiong CY, Li YR. Effect of hydration pretreatment on tunnel etching behaviour of aluminum foil. Corros. Sci., 2013, 70, 180.

[19] Liang LB, He YD, Song HZ, Yang XF, Cai XY. Morphological evolution of tunnel tips for aluminum foils during DC etching. Int. J. Miner. Metall. Mater., 2013, 20(10): 961.