Textural changes in metallurgical coke prepared with polyethylene

Abstract

The effect of high-density polyethylene (HDPE) on the textural features of experimental coke was investigated using polarized-light optical microscopy and wavelet-based image analysis. Metallurgical coke samples were prepared in a laboratory-scale furnace with 2.5%, 5.0%, 7.5%, 10.0%, and 12.5% HDPE by mass, and one sample was prepared by 100% coal. The amounts and distribution of textures (isotropic, mosaic and banded) and pores were obtained. The calculations reveal that the addition of HDPE results in a decrease of mosaic texture and an increase of isotropic texture. Ethylene formed from the decomposition of HDPE is considered as a probable reason for the texture modifications. The approach used in this study can be applied to indirect evaluation for the reactivity and strength of coke.

Keywords

metallurgical coke / texture / image analysis / polyethylene

References

[1] Sharma R, Dash PS, Banerjee PK, Kumar D. Effect of coke micro-textural and coal petrographic properties on coke strength characteristics. ISIJ Int, 2005, 45, 1820.

[2] Fujita H, Hijiriyama M, Nishida S. Gasification reactivities of optical textures of metallurgical cokes. Fuel, 1983, 62, 875.

[3] Mattila O, Salmi P. Wavelet-based image analysis method to study the properties of coke. Scanmet: III. International Conference on Process Development in Iron and Steelmaking, Luleå, 2008 237

[4] H. Makkonen, O. Mattila, and S. Gornostayev, Preliminary Study of the Image Analysis of Coke Textures, University of Oulu Press, Oulu, Finland, p.5.

[5] Patrick JW, Sims MJ, Stacey AE. Quantitative characterization of the texture of coke. J. Microsc., 1977, 109, 137.

[6] Coin CDA. Coke microtextural description: comparison of nomenclature, classification and methods. Fuel, 1987, 66, 702.

[7] Kashiwaya Y, Ishii K. Kinetic analysis of coke gasification based on non-crystal/crystal ratio of carbon. ISIJ Int., 1991, 31, 440.

[8] Lundgren M, Ökvist L S, Björkman B. Coke reactivity under blast furnace conditions and in the CSR/CRI test. Steel Res. Int., 2009, 80, 396.

[9] Nomura S, Kato K, Nakagawa T, Komaki I. The effect of plastic addition on coal caking properties during carbonization. Fuel, 2003, 82, 1775.

[10] Melendi S, Diez MA, Alvarez R, Barriocanal C. Relevance of the composition of municipal plastic wastes for metallurgical coke production. Fuel, 2011, 90, 1431.

[11] Fernández AM, Barriocanal C, Díez MA, Alvarez R. Influence of additives of various origins on thermoplastic properties of coal. Fuel, 2009, 88, 2365.

[12] Diez MA, Borrego AG. Evaluation of CO₂-reactivity patterns in cokes from coal and woody biomass blends. Fuel, 2013, 113, 59.

[13] Montiano MG, Barriocanal C, Alvarez R. Effect of the addition of waste sawdust on thermoplastic properties of a coal. Fuel, 2013, 106, 537.

[14] Montiano MG, Díaz-Faes E, Barriocanal C, Alvarez R. Influence of biomass on metallurgical coke quality. Fuel, 2014, 116, 175.

[15] Brzozowska T, Zieliñski J, Machnikowski J. Effect of polymeric additives to coal tar pitch on carbonization behaviour and optical texture of resultant cokes. J. Anal. Appl. Pyrol., 1998, 48, 45.

[16] Heino J, Gornostayev S, Kokkonen T, Huttunen S, Fabritius T. Waste plastic from harmful carbon based material to valuable raw material of metallurgical coke, coke oven gas, hydrogen, and hydrocarbon oil. Proceedings of Carbon 2012 Conference, Krakow, 2012 11

[17] T. Kokkonen and S. Gornostayev, Preparation of Samples of Metallurgical Coke for Optical and Electron Microscopy and Electron Probe Microanalysis, University of Oulu Press, Oulu, Finland, p. 3.

[18] Nisar J, Ali M, Awan IA. Catalytic thermal decomposition of polyethylene by pyrolysis gas chromatography. J. Chil. Chem. Soc., 2011, 56, 653.

[19] Guerrero A, Diez MA, Borrego AG. Effect of volatile matter release on optical properties of macerals from different rank coals. Fuel, 2013, 114, 21.

[20] Sommariva S, Maffei T, Migliavacca G, Faravelli T, Ranzi E. A predictive multi-step kinetic model of coal devolatilization. Fuel, 2010, 89, 318.

[21] Heino J, Gornostayev S, Kokkonen T, Huttunen S, Fabritius T. Waste plastic as a recyclable raw material of metallurgical coke to produce hydrogen as by-product. Proceedings of 2nd International Symposium on Green Chemistry, 2013 936