Production of HfO2 thin films using different methods: chemical bath deposition, SILAR and sol-gel process
İ. A. Kariper
International Journal of Minerals, Metallurgy, and Materials ›› 2014, Vol. 21 ›› Issue (8) : 832 -838.
Production of HfO2 thin films using different methods: chemical bath deposition, SILAR and sol-gel process
Hafnium oxide thin films (HOTFs) were successfully deposited onto amorphous glasses using chemical bath deposition, successive ionic layer absorption and reaction (SILAR), and sol-gel methods. The same reactive precursors were used for all of the methods, and all of the films were annealed at 300°C in an oven (ambient conditions). After this step, the optical and structural properties of the films produced by using the three different methods were compared. The structures of the films were analyzed by X-ray diffraction (XRD). The optical properties are investigated using the ultraviolet-visible (UV-VIS) spectroscopic technique. The film thickness was measured via atomic force microscopy (AFM) in the tapping mode. The surface properties and elemental ratios of the films were investigated and measured by scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDX). The lowest transmittance and the highest reflectance values were observed for the films produced using the SILAR method. In addition, the most intense characteristic XRD peak was observed in the diffraction pattern of the film produced using the SILAR method, and the greatest thickness and average grain size were calculated for the film produced using the SILAR method. The films produced using SILAR method contained fewer cracks than those produced using the other methods. In conclusion, the SILAR method was observed to be the best method for the production of HOTFs.
hafnium oxide / thin films / optical properties / structural properties / chemical deposition / absorption / sol-gel process
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
M.P. Agustin, G. Bersuker, B. Foran, L.A. Boatner, and S. Stemmer, Scanning transmission electron microscopy investigations of interfacial layers in HfO2 gate stacks, J. Appl. Phys., 100(2006), art. No. 024103. |
| [5] |
|
| [6] |
|
| [7] |
M.C. Cheynet, S. Pokrant, F.D. Tichelaar, and J.L. Rouvière, Crystal structure and band gap determination of HfO2 thin films, J. Appl. Phys., 101(2007), art. No. 054101. |
| [8] |
|
| [9] |
N.V. Nguyen, A.V. Davydov, and D. Chandler-Horowitz, Sub-bandgap defect states in polycrystalline hafnium oxide and their suppression by admixture of silicon, Appl. Phys. Lett., 87(2005), art. No. 192903. |
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
Chin. Phys. B, 2010, 19(8) |
| [14] |
H. Shimizu, D. Nemoto, M. Ikeda, and T. Nishide, Characteristics of sol-gel-derived and crystallized HfO2 thin films dependent on sol solution, Jpn. J. Appl. Phys., 49(2010), art. No. 121502. |
| [15] |
|
| [16] |
İ.A. Kariper and T. Özpozan, Cobalt xanthate thin film with chemical bath deposition, J. Nanomater., 2013(2013), art. No. 139864. |
| [17] |
|
/
| 〈 |
|
〉 |