Influences of synthesis methods and modifier addition on the properties of Ni-based catalysts supported on reticulated ceramic foams

Abstract

A method of synthesizing Ni-based catalysts supported on α-Al₂O₃-based foams was developed. The foams were impregnated with aqueous solutions of metal chlorides under an air atmosphere using an aerosol route. Separate procedures involved calcination to form oxides and drying to obtain chlorides on the foam surface. The synthesized samples were subsequently reduced with hydrogen. With respect to the Ni/Al₂O₃ catalysts, the chloride reduction route enabled the formation of a Ni coating without agglomerates or cracks. Further research included catalyst modification by the addition of Pd, Cu, and Fe. The influences of the additives on the degree of reduction and on the low-temperature reduction effectiveness (533 and 633 K) were examined and compared for the catalysts obtained from oxides and chlorides. Greater degrees of reduction were achieved with chlorides, whereas Pd was the most effective modifier among those investigated. The reduction process was nearly complete at 533 K in the sample that contained 0.1wt% Pd. A lower reduction temperature was utilized, and the calcination step was avoided, which may enhance the economical and technological aspects of the developed catalyst production method.

Keywords

catalysts / nickel / ceramic foams / modification / aerosol process / catalytic properties

References

[1] Alcock CB. Thermochemical Processes: Principles and Models, 2001, Oxford, Butterworth-Heinemann, 130

[2] Kwak BS, Kim J, Kang M. Hydrogen production from ethanol steam reforming over core-shell structured Ni_xO_y-, Fe_xO_y-, and Co_xO_y-Pd catalysts. Int. J. Hydrogen Energy, 2010, 35(21): 11829.

[3] Goula MA, Kontou SK, Tsiakaras PE. Hydrogen production by ethanol steam reforming over a commercial Pd/γ-Al₂O₃ catalyst. Appl. Catal. B, 2004, 49(2): 135.

[4] Grosse J, Dietrich B, Garrido G I, Habisreuther P, Zarzalis N, Martin H, Kind M, Kraushaar-Czarnetzki B. Morphological characterization of ceramic sponges for applications in chemical engineering. Ind. Eng. Chem. Res., 2009, 48(23): 10395.

[5] Twigg MV, Richardson JT. Theory and applications of ceramic foam catalysts. Chem. Eng. Res. Des., 2002, 80(2): 183.

[6] Akande AJ, Idem RO, Dalai AK. Synthesis, characterization and performance evaluation of Ni/Al2O3 catalysts for reforming of crude ethanol for hydrogen production. Appl. Catal. A, 2005, 287(2): 159.

[7] Liguras DK, Kondarides DI, Verykios XE. Production of hydrogen for fuel cells by steam reforming of ethanol over supported noble metal catalysts. Appl. Catal. B, 2003, 43(4): 345.

[8] Fatsikostas AN, Kondarides DI, Verykios XE. Production of hydrogen for fuel cells by reformation of biomass-derived ethanol. Catal. Today, 2002, 75(1–4): 145.

[9] Zhang Y, Tang YH, Zhang EL, Lin LW, Pei LZ. Preparation of Ni/MgO catalysts for carbon nanofibres by a self-propagating low temperature combustion process. Mater. Sci. Poland, 2010, 28(4): 805

[10] Profeti LPR, Dias JAC, Assaf JM, Assaf EM. Hydrogen production by steam reforming of ethanol over Ni-based catalysts promoted with noble metals. J. Power Sources, 2009, 190(2): 525.

[11] Cheng CK, Foo SY, Adesina AA. Steam reforming of glycerol over Ni/Al₂O₃ catalyst. Catal. Today, 2011, 178(1): 25.

[12] Yoshida K, Okumura K, Miyao T, Naito S, Ito S, Kunimori K, Tomishige K. Oxidative steam reforming of methane over Ni/α-Al₂O₃ modified with trace Pd. Appl. Catal. A, 2008, 351(2): 217.

[13] Villa R, Cristiani C, Groppi G, Lietti L, Forzatti P, Cornaro U, Rossini S. Ni based mixed oxide materials for CH₄ oxidation under redox cycle conditions. J. Mol. Catal. A, 2003, 204–205, 637.

[14] Shih K, White T, Leckie JO. Spinel formation for stabilizing simulated nickel-laden sludge with aluminum-rich ceramic precursors. Environ. Sci. Technol., 2006, 40(16): 5077.

[15] Gayán P, de Diego LF, García-Labiano F, Adánez J, Abad A, Dueso C. Effect of support on reactivity and selectivity of Ni-based oxygen carriers for chemical-looping combustion. Fuel, 2008, 87(12): 2641.

[16] Watanabe M, Yamashita H, Chen X, Yamanaka J, Kotobuki M, Suzuki H, Uchida H. Nano-sized Ni particles on hollow alumina ball: catalysts for hydrogen production. Appl. Catal. B, 2007, 71(3–4): 237.

[17] Wei X, Hug P, Figi R, Trottmann M, Weidenkaff A, Ferri D. Catalytic combustion of methane on nano-structured perovskite-type oxides fabricated by ultrasonic spray com bustion. Appl. Catal. B, 2010, 94(1–2): 27.

[18] Matula G, Bogović J, Stopić S, Friedrich B. Scale-up of the ultrasonic spray pyrolysis (USP) process for nanopowder production (Part 1). Powder Inject. Mould. Int., 2013, 7(1): 75

[19] Ebin B, Arıg E, Özkal B, Gürmen S. Production and characterization of ZnO nanoparticles and porous particles by ultrasonic spray pyrolysis using a zinc nitrate precursor. Int. J. Miner. Metall. Mater., 2012, 19(7): 651.

[20] Gurmen S, Ebin B, Stopić S, Friedrich B. Nanocrystalline spherical iron-nickel (Fe-Ni) alloy particles prepared by ultrasonic spray pyrolysis and hydrogen reduction (USP-HR). J. Alloys Compd., 2009, 480(2): 529.

[21] Ribeiro F, Silva JM, Silva E, Vaz M F, Oliveira FAC. Catalytic combustion of toluene on Pt zeolite coated cordierite foams. Catal. Today, 2011, 176(1): 93.

[22] Ciambelli P, Palma V, Palo E. Comparison of ceramic honeycomb monolith and foam as Ni catalyst carrier for methane autothermal reforming. Catal. Today, 2010, 155(1–2): 92.

[23] Nikolić V, Kamberović Andić Z, Korać M, Vujović A, Sokić M. Alumina based catalytically active components carriers with improved properties. Proceedings of the 44th International October Conference on Mining and Metallurgy, 2012 395

[24] Nikolić V, Kamberović AnĐić Z, Korać M, Sokić M. Synthesis of α-Al₂O₃ based foams with improved properties as catalyst carriers. Mater. Technol., 2014, 48(1): 45

[25] Pérez-Hernández R, Gutiérrez-Martínez A, Palacios J, Vega-Hernández M, Rodríguez-Lugo V. Hydrogen production by oxidative steam reforming of methanol over Ni/CeO₂-ZrO₂ catalysts. Int. J. Hydrogen Energy, 2011, 36(11): 6601.

[26] Kamberović Sokić M, Matković V, Andić Z, Korać M, Nikolić V. Effects of additives on nickel(II)-chloride hydrogen reduction for production of nanocomposite catalysts. Metall. Int., 2012, 17(5): 37

[27] Šušić M, Stopić S, Ilić I, Uskoković D. Kinetics of hydrogen absorption by nickel powder with added palladium, copper, and nickel from nickel-chloride reduction by hydrogen. Int. J. Hydrogen Energy, 1997, 22(7): 661

[28] Profeti LPR, Ticianelli EA, Assaf EM. Production of hydrogen via steam reforming of biofuels on Ni/CeO₂-Al₂O₃ catalysts promoted by noble metals. Int. J. Hydrogen Energy, 2009, 34(12): 5049.

[29] Amorim C, Keane M A. Catalytic hydrodechlorination of chloroaromatic gas streams promoted by Pd and Ni: the role of hydrogen spillover. J. Hazard. Mater., 2011, 211–212, 208

[30] Gao WL, Guan NJ, Chen JX, Guan XX, Jin RC, Zeng HS, Liu ZG, Zhang FX. Titania supported Pd-Cu bimetallic catalyst for the reduction of nitrate in drinking water. Appl. Catal. B, 2003, 46(2): 341.