Microstructure and texture evolution in commercial-purity Zr 702 during cold rolling and annealing

Abstract

Microstructure and texture evolution in commercial-purity Zr 702 during cold rolling and annealing was investigated by optical microscopy, transmission electron microscopy, and X-ray diffraction. The results showed that crystallographic slip was the predominant deformation mechanism in the early stage of deformation. Deformation twins started to form when the rolling reduction was larger than 38.9%; both the dislocation density and the number of twins increased with increasing rolling reduction. The initial texture of the Zr 702 plate consisted of the basal fiber component. During cold rolling the strength of the basal fiber first decreased and then increased with increasing rolling reduction. The cold-rolled sheets were fully recrystallized after being annealed at 550°C. The recrystallization temperature and the size of recrystallized grains decreased with increasing rolling reduction. A larger rolling reduction resulted in a higher grain growth rate when the annealing temperature increased from 550°C to 700°C. The recrystallization texture was characterized by a major basal fiber and a minor $\{ 01\bar 13\} < 2\bar 1\bar 10 >$ component. The strength of the recrystallization texture increased with increasing rolling reduction.

Keywords

zirconium / cold rolling / annealing / microstructure / texture / recrystallization

References

[1] Murgatroyd RA, Rogerson A. An assessment of the influence of microstructure and test conditions on the irradiation growth phenomenon in zirconium alloys. J. Nucl. Mater., 1980, 90(1–3): 240.

[2] Fidleris V. The effect of cold-work and stress-relieving on the irradiation growth behaviour of zirconium alloys. J. Nucl. Mater., 1973, 46(3): 356.

[3] Ibrahim EF. In-reactor tubular creep of Zircaloy-2 at 260 to 300°C. J. Nucl. Mater., 1973, 46(2): 169.

[4] Holt RA. Recovery of cold-work in extruded Zr-2.5wt%Nb. J. Nucl. Mater., 1976, 59(3): 234.

[5] Hunt CEL, Schulson EM. Recrystallization of zircaloy-4 during transient heating. J. Nucl. Mater., 1980, 92(2–3): 184.

[6] Chun YB, Hwang SK, Kim MH, Kwun SI, Chae SW. Effect of Mo addition on the crystal texture and deformation twin formation in Zr-based alloys. J. Nucl. Mater., 2001, 295(1): 31.

[7] Kumar MK, Samajdar I, Venkatramani N, Dey GK, Tewari R, Srivastava D, Banerjee S. Explaining absence of texture development in cold rolled two-phase Zr-2.5wt%Nb alloy. Acta Mater., 2003, 51(3): 625.

[8] Zhu KY, Chaubet D, Bacroix B, Brisset F. A study of recovery and primary recrystallization mechanisms in a Zr-2Hf alloy. Acta Mater., 2005, 53(19): 5131.

[9] Dewobroto N, Bozzolo N, Barberis P, Wagner F. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702). Z. Metallkd., 2006, 97(6): 826.

[10] Seo YS, Chun YB, Hwang SK. A 3D Monte-Carlo simulation study of recrystallization kinetics in Zr with hypothetical stored energy gradients. Comput. Mater. Sci., 2008, 43(3): 512.

[11] Gerspach F, Bozzolo N, Wagner F. About texture stability during primary recrystallization of cold-rolled low alloyed zirconium. Scripta Mater., 2009, 60(4): 203.

[12] Vanitha C, Kumar M K, Dey GK, Srivastava D, Tewari R, Banerjee S. Recrystallization texture development in single-phase Zircaloy 2. Mater. Sci. Eng. A, 2009, 519(1–2): 51.

[13] Jung YI, Lee MH, Kim HG, Park JY, Jeong YH. Behavior of a recrystallization in HANA-4 and HANA-6 zirconium-based alloys. J. Alloys Compd., 2009, 479(1–2): 423.

[14] Chung JH. Development of thermomechanical processing method to enhance twinning in commercially pure Zr. Scripta Mater., 2009, 61(2): 161.

[15] Kad BK, Gebert JM, Perez-Prado MT, Kassner ME, Meyers MA. Ultrafine-grain-sized zirconium by dynamic deformation. Acta Mater., 2006, 54(16): 4111.

[16] Lee BS, Kim MH, Hwang SK, Kwun SI, Chae SW. Grain refinement of commercially pure zirconium by ECAP and subsequent intermediate heat treatment. Mater. Sci. Eng. A, 2007, 449–451, 1087.

[17] Castelnau O, Francillette H, Bacroix B, Lebensohn RA. Texture dependent plastic behavior of Zr 702 at large strain. J. Nucl. Mater., 2001, 297(1): 14.

[18] Chun YB, Yu SH, Semiatin SL, Hwang SK. Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium. Mater. Sci. Eng. A, 2005, 398(1–2): 209.

[19] Jiang L, Pérez-Prado MT, Gruber PA, Arzt E, Ruano OA, Kassner ME. Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding. Acta Mater., 2008, 56(6): 1228.

[20] Yoo MH, Wei CT. Slip modes of hexagonal-close-packed metals. J. Appl. Phys., 1967, 38(11): 4317.

[21] Akhtar A. Compression of zirconium single crystals parallel to the c-axis. J. Nucl. Mater., 1973, 47(1): 79.

[22] Numakura H, Minonishi Y, Koiwa M. $< \bar 1\bar 123 > \{ 10\bar 11\}$ slip in zirconium. Philos. Mag. A, 1991, 63(5): 1077.

[23] McCabe RJ, Cerreta EK, Misra A, Kaschner GC, Tomé CN. Effects of texture, temperature and strain on the deformation modes of zirconium. Philos. Mag. A, 2006, 86(23): 3595.

[24] Beyerlein IJ, Tomé CN. A dislocation-based constitutive law for pure Zr including temperature effects. Int. J. Plast., 2008, 24(5): 867.

[25] Francillette H, Bacroix B, Gasperini M, Bechade JL. Grain orientation effects in Zr702α polycrystalline samples deformed in channel die compression at room temperature. Acta Mater., 1998, 46(12): 4131.

[26] Akhtar A, Teghtsoonian A. Plastic deformation of zirconium single crystals. Acta Metall., 1971, 19(7): 655.

[27] Martin JL, Reed-Hill RE. A study of basal slip kink bands in polycrystalline zirconium. Trans. AIME, 1964, 230, 780

[28] Bhattacharyya D, Cerreta EK, McCabe R, Niewczas M, Gray GT III Misra A, Tomé CN. Origin of dislocations within tensile and compressive twins in pure textured Zr. Acta Mater., 2009, 57(2): 305.

[29] Yoo MH, Lee JK. Deformation twinning in h.c.p. metals and alloys. Philos. Mag. A, 1991, 63(5): 987.

[30] Radhakrishnan B, Gorti SB, Stoica GM, Muralidharan G, Stoica AD, Wang XL, Specht ED, Kenik E, Muth T. Mesoscale modeling and validation of texture evolution during asymmetric rolling and static recrystallization of magnesium alloy AZ31B. Metall. Mater. Trans. A, 2012, 43(5): 1509.

[31] Li MH, Ma M, Liu WC, Yang FQ. Recrystallization behavior of cold-rolled Zr 702. J. Nucl. Mater., 2013, 433(1–3): 6.

[32] Doherty RD. Recrystallization and texture. Prog. Mater. Sci., 1997, 42, 39.