Structural and mechanical properties of 7075 alloy strips fabricated by roll-casting in a static magnetic field

Abstract

The influences of a 0.2 T static magnetic field on the microstructure of 7075 aluminum alloys sheets produced with a twin-roll continuous caster at 675°C were investigated in this paper. Under a uniform magnetic field, the primary dendrites were refined and tended to be equiaxed. The microstructure consisted of an intermediate case between dendritic and equiaxed grains. Moreover, the use of an external static field in the twin-roll casting process can reduce heat discharge, resulting in a decrease in undercooling, and may also account for the abatement of segregation bands. In addition, the static magnetic field effectively improved the solute mixing capacity, and the added atoms more easily diffused from precipitates to the α-Al matrix, which resulted in an increase in the mechanical properties of the rolled sheets. Specimens prepared both in the presence of a static magnetic field and in the absence of a static magnetic field exhibited brittle-fracture characteristics.

Keywords

aluminum alloys / magnetic field / roll-casting / mechanical properties

References

[1] Li JP, Shen J, Yan XD, Mao BP, Yan LM. Recrystallization behavior of 7050 aluminum alloy during multi-pass hot compression process. Chin. J. Nonferrous Met., 2009, 19(10): 1754

[2] Kim JH, Yeom JT, Lee DG, Lim SG, Park NK. Effect of scandium content on the hot extrusion of Al-Zn-Mg-(Sc) alloy. J. Mater. Process. Technol., 2007, 187–188, 635.

[3] Wang ZT. Review of China’s aluminum strip stock continuous casting industry. Nonferrous Met. Process., 2002, 31(3): 11

[4] Sun NY, Patterson BR, Suni JP, Simielli EA, Weiland H, Allard LF. Microstructural evolution in twin roll cast AA3105 during homogenization. Mater. Sci. Eng. A, 2006, 416(1–2): 232.

[5] Godard D, Archambault P, Gautier EA, Lapasset G. Precipitation sequences during quenching of the AA 7010 alloy. Acta. Mater., 2002, 50(9): 2319.

[6] Zhang H, Jin NP, Chen JH. Hot deformation behavior of Al-Zn-Mg-Cu-Zr aluminum alloys during compression at elevated temperature. Trans. Nonferrous Met. Soc. China, 2011, 21(3): 437.

[7] Li L, Zhang YD, Claude E, Zhao ZH, Zuo YB, Zhang HT, Cui JZ. Formation of feathery grains with the application of a static magnetic field during direct chill casting of Al-9.8wt% Zn alloy. J. Mater. Sci., 2009, 44(4): 1063.

[8] Zhao H, Li PJ, He LJ. Coupled analysis of temperature and flow during twin-roll casting of magnesium alloy strip. J. Mater. Process. Technol., 2011, 211(6): 1197.

[9] Haga T, Ikawa M, Wtari H, Kumai S. 6111 aluminium alloy strip casting using an unequal diameter twin roll caster. J. Mater. Process. Technol., 2006, 172(2): 271.

[10] Chen HB, Yang B. Effect of heat treatment on microstructures and mechanical properties of a bulk nanostructured Al-Zn-Mg-Cu alloy. Int. J. Miner. Metall. Mater., 2009, 16(6): 672

[11] McQueen HJ, Ryan ND. Constitutive analysis in hot working. Mater. Sci. Eng. A, 2002, 322(1–2): 43.

[12] Acta Mater., 2003, 51(19p.5775)

[13] Liu XY, Pan QL, He YB, Li WB, Liang WJ, Yin ZM. Flow behavior and microstructural evolution of Al-Cu-Mg-Ag alloy during hot compression deformation. Mater. Sci. Eng. A, 2009, 500(1–2): 150.

[14] Watari H, Davey K, Rasgado MT, Haga H, Izawa S. Semi-solid manufacturing process of magnesium alloys by twin-roll casting. J. Mater. Process. Technol., 2004, 155–156, 1662.

[15] Ei SO, Samuel AM, Samuel FH, Doty HW. The effects of mischmetal, cooling rate and heat treatment on the eutectic Si particle characteristics of A319.1, A356.2 and A413.1 Al-Si casting alloys. Mater. Sci. Eng. A, 2008, 480(1–2): 342

[16] Xu CL, Jiang QC. Morphologies of primary silicon in hypereutectic Al-Si alloys with melt overheating temperature and cooling rate. Mater. Sci. Eng. A, 2006, 437(2): 451.

[17] Moldovan P, Popescu G, Miculescu F. Microscopic study regarding the microstructure evolution of the 8006 alloy in the plastic deformation process. J. Mater. Process. Technol., 2004, 153–154, 408.

[18] Li XM, Starink MJ. Analysis of precipitation and dissolution in overage 7XXX aluminum alloys using DSC. Mater. Sci. Forum, 2000, 331–337, 1071.

[19] Rokni MR, Zarei HA, Abedi HR. Microstructure evolution and mechanical properties of back extruded 7075 aluminum alloy at elevated temperatures. Mater. Sci. Eng. A, 2012, 532, 593.

[20] Guo SJ, Xue GX, Liu JY, Ma K, Wang JC, Li TJ, Cao ZQ. Microstructures and mechanical properties of soft-contact electromagnetic DC casting 7050 high-strength alloy ingot. Chin. J. Nonferrous Met., 2010, 20(7): 1282.

[21] Kumar SR, Gudimetla K, Venkatachalam P, Ravisankar B, Jayasankar K. Microstructural and mechanical properties of Al 7075 alloy processed by equal channel angular pressing. Mater. Sci. Eng. A, 2012, 533, 50.