Synthesis and performance of Ca-α/β-SiAlON composites from tailings

Abstract

Ca-α/β-SiAlON composites were prepared using Ca-α/β-SiAlON powder synthesized from gold ore tailings, which contained abundant Si and Al elements as the major raw materials together with minor additives, through a pressure-less sintering method. The influences of sintering temperature on the phase composition and microstructure of the composites were analyzed. The scanning electron microscopy images of the composites show the interlacing of grains with elongated columnar, short columnar and plate-like morphologies. The composites sintered at 1520°C for 6 h have a flexural strength of 352 MPa, Vickers hardness of 11.2 GPa, and fracture toughness of 4.8 MPa·m^1/2. The relative content of each phase in the products is I(Ca-α-SiAlON):I(β-SiAlON):I(Fe₃Si) = 23:74:3, where I _i stands for the diffraction peak intensity of phase i.

Keywords

ceramic materials / composite materials / tailings / mechanical properties / microstructure / sintering

References

[1] Najafi Hajivar I, Kokabi M. Polymer-network hydrogel facilitated synthesis of Ca-α-SiAlON balls composed of nanoparticles. Ceram. Int., 2013, 39(3): 3321.

[2] Acikbas N C, Kumar R, Kara F, Mandal H, Basu B. Influence of β-Si₃N₄ particle size and heat treatment on microstructural evolution of α:β-SiAlON ceramics. J. Eur. Ceram. Soc., 2011, 31(4): 629.

[3] Ma BY, Li Y, Yan C, Ding YS. Effects of synthesis temperature and raw materials composition on preparation of β-SiAlON based composites from fly ash. Trans. Nonferrous Met. Soc. China, 2012, 22(1): 129.

[4] Li JJ, Wang J, Chen HY, Sun BD. Microstructure observation of β-SiAlON-15R ceramics synthesized from aluminum dross. Ceram. Int., 2012, 38(4): 3075.

[5] Hao HS, Xu LH, Ni XM, Yang JY, Guo YJ, Zhang ZS, Li XW. Synthesis of environment-friendly SiAlON/SiC multiphase ceramics from cheap nonmetallic resources. Rare Metal Mat. Eng., 2009, 38(2): 670

[6] Jiang T, Wu JB, Xue XX, Duan PN, Chu MS. Carbothermal formation and microstructural evolution of α′-SiAlON-AlN-BN powders from boron-rich blast furnace slag. Adv. Powder Technol., 2012, 23(3): 406.

[7] Hou XM, Yue CS, Zhang M, Chou KC. Thermal oxidation of SiAlON powders synthesized from coal gangue. Int. J. Miner. Metall. Mater., 2011, 18(1): 77.

[8] Lu J, Alakangas L, Jia Y, Gotthardsson J. Evaluation of the application of dry covers over carbonate-rich sulphide tailings. J. Hazard. Mater., 2013, 244–245, 180.

[9] Hao HS, Xu LH, Zhai W, Zhang ZS, Zhang XM, Xie ZP. Development of SiAlON ecomaterials drived from solid waste of containing silican and aluminum. J. Inorg. Mater., 2010, 25(11): 1121.

[10] Ahn JS, Song H, Yim GJ, Ji SW, Kim JG. An engineered cover system for mine tailings using a hardpan layer: a solidification/stabilization method for layer and field performance evaluation. J. Hazard. Mater., 2011, 197, 153.

[11] Choi YW, Kim Y J, Choi O, Lee KM, Lachemi M. Utilization of tailings from tungsten mine waste as a substitution material for cement. Constr. Build. Mater., 2009, 23(7): 2481.

[12] Fall M, Pokharel M. Coupled effects of sulphate and temperature on the strength development of cemented tailings backfills: Portland cement-paste backfill. Cem. Concr. Compos., 2010, 32(10): 819.

[13] Zhao T, Li BW, Gao ZY, Chang DQ. The utilization of rare earth tailing for the production of glass-ceramics. Mater. Sci. Eng., B, 2010, 170(1–3): 22.

[14] Yi ZL, Sun HH, Wei XQ, Li C. Iron ore tailings used for the preparation of cementitious material by compound thermal activation. Int. J. Miner. Metall. Mater., 2009, 16(3): 355.

[15] Ercikdi B, Cihangir F, Kesimal A, Deveci H, Alp Utilization of industrial waste products as pozzolanic material in cemented paste backfill of high sulphide mill tailings. J. Hazard. Mater., 2009, 168(2–3): 848.

[16] Hao HS, Wang HL, Fan CX, Qian XG, Wang YH, Cui SQ, Hu MH. Synthesis of Ca-α/β-SiAlON powders from tailings by carbothermal reduction nitridation. Mater. Rev., 2012, 26(16): 125

[17] Han SM, Kang SJL. Phase transformation from α′-to β′-SiAlON by liquid infiltration in Y-Si-Al-O-N system. J. Eur. Ceram. Soc., 1993, 12(6): 431.

[18] Cui GW. Defect Diffusion and Sintering, 1990, Beijing, Tsinghua University Press, 168

[19] Hwang SL, Chen IW. Reaction hot-pressing of α′-SiAlON and β′-SiAlON ceramics. J. Am. Ceram. Soc., 1994, 77, 165.

[20] Watari K, Yasuoka M, Valecillos MC, Kanzaki S. Reaction process and densification process of mixed α′/β′-SiAlON ceramics. J. Eur. Ceram. Soc., 1995, 15(2): 173.

[21] Chatfield C, Ekström T, Mikus M. Microstructural investigation of alpha-beta yttrium SiAlON materials. J. Mater. Sci., 1986, 21(7): 2297.

[22] Sheu TS. Microstructure and mechanical properties of the in situ β-Si₃N₄/α′-SiAlON composite. J. Am. Ceram. Soc., 1994, 77(9): 2345.

[23] Lu ZL, Zhu GQ, Tao F, Jiang DY. The effect of microstructure on the scatter of the mechanical properties data of α-β-SiAlON. J. Exp. Mech., 2005, 20(2): 235

[24] Xu GF, Zhuang HR, Wu FY, Li WL. Microwave reaction sintering of α-β-SiAlON composite ceramics. J. Eur. Ceram. Soc., 1997, 17(5): 675.