Study on the strength of cold-bonded high-phosphorus oolitic hematite-coal composite briquettes

Abstract

Composite briquettes containing high-phosphorus oolitic hematite and coal were produced with a twin-roller briquette machine using sodium carboxymethyl cellulose, molasses, starch, sodium silicate, and bentonite as binders. The effect of these binders on the strength of the composite briquettes, including cold strength and high-temperature strength, was investigated by drop testing and compression testing. It was found the addition of Ca(OH)₂ and Na₂CO₃ not only improved the reduction of iron oxides and promoted dephosphorization during the reduction-separation process but also provided strength to the composite briquettes during the briquetting process; a compressive strength of 152.8 N per briquette was obtained when no binders were used. On this basis, the addition of molasses, sodium silicate, starch, and bentonite improved the cold strength of the composite briquettes, and a maximum compressive strength of 404.6 N per briquette was obtained by using starch. When subjected to a thermal treatment at 1200°C, all of the composite briquettes suffered from a sharp decrease in compressive strength during the initial reduction process. This decrease in strength was related to an increase in porosity of the composite briquettes. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses showed that the decrease in strength of the composite briquettes could be caused by four factors: decomposition of bonding materials, gasification of coal, transportation of byproduct gases in the composite briquettes, and thermal stress.

Keywords

hematite / briquetting / binders / compressive strength / porosity / direct reduction process

References

[1] Agrawal BB, Prasad KK, Sarkar SB, Ray HS. Cold bonded ore-coal composite pellets for sponge ironmaking: Part 1. Laboratory scale development. Ironmaking Steelmaking, 2000, 27(6): 421.

[2] Agrawal BB, Prasad KK, Sarkar SB, Ray HS. Cold bonded ore-coal composite pellets for sponge ironmaking: Part 2. Plant trials in rotary kiln. Ironmaking Steelmaking, 2001, 28(1): 23.

[3] Dutta SK, Ghosh A. Study of nonisothermal reduction of iron ore-coal/char composite pellet. Metall. Mater. Trans. B, 1994, 25(1): 15.

[4] Lee YS, Ri DW, Yi SH, Sohn I. Relationship between the reduction degree and strength of DRI pellets produced from iron and carbon bearing wastes using an RHF simulator. ISIJ Int., 2012, 52(8): 1454.

[5] El-Hussiny NA, Shalabi MEH. A self-reduced intermediate product from iron and steel plants waste materials using a briquetting process. Powder Technol., 2011, 205(1–3): 217.

[6] Aota J, Morin L, Zhuang Q, Clements B. Direct reduced iron production using cold bonded carbon bearing pellets: Part 1. Laboratory metallisation. Ironmaking steelmaking, 2006, 33(5): 426.

[7] Zhuang Q, Clements B, Aota J, Morin L. DRI production using cold bonded carbon bearing pellets: Part 2. Rotary kiln process modelling. Ironmaking Steelmaking, 2006, 33(5): 429.

[8] Mantovani MC, Takano C, Büchler PM. Electric arc furnace dust-coal composite pellet: effects of pellet size, dust composition, and additives on swelling and zinc removal. Ironmaking Steelmaking, 2002, 29(4): 257.

[9] Mantovani MC, Takano C. The strength and the high temperature behaviors of self-reducing pellets containing EAF dust. ISIJ Int., 2000, 40(3): 221.

[10] Sah R, Dutta SK. Effects of binder on the properties of iron ore-coal composite pellets. Miner. Process. Extr. Metall. Rev., 2010, 31(3): 73.

[11] Takano C, Mourao MB. Comparison of high temperature behavior of self-reducing pellets produced from iron ore with that of dust from sintering plant. ISIJ Int., 2001, 41, S22.

[12] Anameric B, Kawatra SK. Properties and features of direct reduced iron. Miner. Process. Extr. Metall. Rev., 2007, 28(1): 59.

[13] Anameric B, Kawatra SK. Direct iron smelting reduction processes. Miner. Process. Extr. Metall. Rev., 2008, 30(1): 1

[14] Bi XG, Zhou JD, Huang ZC, Jin Y, Xiong W. Present investigation situation of dephosphorization processes for high phosphorus content iron ores. Henan Metall., 2007, 15(6): 3

[15] Zhou JC, Xue ZL, Zhang HF, Li ZQ. Study on phosphorus removal technology of high-phosphorus oolitic hematite. Ironmaking, 2007, 26(2): 40

[16] Yang DW, Sun TC, Yang HF, Xu CY, Qi CY, Li ZX. Dephosphorization mechanism in a roasting process for direct reduction of high-phosphorus oolitic hematite in west Hubei Province, China. J. Univ. Sci. Technol. Beijing, 2010, 32(8): 968

[17] Li YL, Sun TC, Xu CY, Liu ZH. New dephosphorizing agent for phosphorus removal from high-phosphorus oolitic hematite ore in direct reduction roasting. J. Cent. South Univ. Sci. Technol., 2012, 43(3): 827

[18] Xu CY, Sun TC, Kou J, Li YL, Mo XL, Tang LG. Mechanism of phosphorus removal in beneficiation of high phosphorous oolitic hematite by direct reduction roasting with dephosphorization agent. Trans. Nonferrous Met. Soc. China, 2012, 22, 2806.

[19] Sun YS, Han YX, Gao P, Wang ZH, Ren DZ. Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation. Int. J. Miner. Metall. Mater., 2013, 20(5): 411.

[20] Yu W, Sun TC, Kou J, Wei YX, Xu CY, Liu ZZ. The function of Ca(OH)₂ and Na₂CO₃ as additive on the reduction of high-phosphorus oolitic hematite-coal mixed pellets. ISIJ Int., 2013, 53(3): 427.

[21] Wei YX, Sun TC, Yu W, Cao YY, Liu ZZ. Mechanism of sodium carboxymethyl cellulose for improving the strength of briquettes made of hematite ore and coal. J. Univ. Sci. Technol. Beijing, 2013, 35(4): 432

[22] Pal J, Ghorai S, Goswami MC, Ghosh S, Ghosh D, Bandyopadhyay D. Development of fluxed iron oxide pellets strengthened by CO₂ treatment for use in basic oxygen steel making. ISIJ Int., 2009, 49(2): 210.

[23] Wang Q. Iron Ore-Coal Composite Briquettes Technology, 2005, Beijing, Metallurgy Industry Press, 16

[24] Srivastava U, Kawatra SK, Eisele TC. Study of organic and inorganic binders on strength of iron oxide pellets. Metall. Mater. Trans. B., 2013, 44(4): 1000.

[25] Takano C, Mourão MB. Self-reducing pellets for ironmaking: mechanical behavior. Miner. Process. Extr. Metall. Rev., 2003, 24(3–4): 233.

[26] Huang ZC, Xu JJ, Zong XG, Liu QY. The requirements of the furnace burdens in the cold-bonded pellet direct reduction process. Sintering pelletizing, 1999, 24(6): 24

[27] Huang ZC, Yi LY, Jiang T. Mechanisms of strength decrease in the initial reduction of iron ore oxide pellets. Powder Technol., 2012, 221, 284.