Microstructure and properties of hydrophobic films derived from Fe-W amorphous alloy

Song Wang , Yun-han Ling , Jun Zhang , Jian-jun Wang , Gui-ying Xu

International Journal of Minerals, Metallurgy, and Materials ›› 2014, Vol. 21 ›› Issue (4) : 395 -400.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2014, Vol. 21 ›› Issue (4) : 395 -400. DOI: 10.1007/s12613-014-0921-x
Article

Microstructure and properties of hydrophobic films derived from Fe-W amorphous alloy

Author information +
History +
PDF

Abstract

Amorphous metals are totally different from crystalline metals in regard to atom arrangement. Amorphous metals do not have grain boundaries and weak spots that crystalline materials contain, making them more resistant to wear and corrosion. In this study, amorphous Fe-W alloy films were first prepared by an electroplating method and were then made hydrophobic by modification with a water repellent (heptadecafluoro-1,1,2,2-tetradecyl) trimethoxysilane. Hierarchical micro-nano structures can be obtained by slightly oxidizing the as-deposited alloy, accompanied by phase transformation from amorphous to crystalline during heat treatment. The micro-nano structures can trap air to form an extremely thin cushion of air between the water and the film, which is critical to producing hydrophobicity in the film. Results show that the average values of capacitance, roughness factor, and impedance for specific surface areas of a 600°C heat-treated sample are greater than those of a sample treated at 500°C. Importantly, the coating can be fabricated on various metal substrates to act as a corrosion retardant.

Keywords

iron tungsten alloys / amorphous films / hydrophobicity / microstructure / contact angle / capacitance

Cite this article

Download citation ▾
Song Wang, Yun-han Ling, Jun Zhang, Jian-jun Wang, Gui-ying Xu. Microstructure and properties of hydrophobic films derived from Fe-W amorphous alloy. International Journal of Minerals, Metallurgy, and Materials, 2014, 21(4): 395-400 DOI:10.1007/s12613-014-0921-x

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Richard E, Aruna ST, Basu BJ. Superhydrophobic surfaces fabricated by surface modification of alumina particles. Appl. Surf. Sci., 2012, 258(24): 10199.

[2]

Appl. Phys. Lett., 2012, 101(12)

[3]

Li L, Breedveld V, Hess DW. Creation of superhydrophobic stainless steel surfaces by acid treatments and hydrophobic film deposition. ACS Appl. Mater. Interfaces, 2012, 4(9): 4549.

[4]

Chen HZ, Zhang X, Zhang PY, Zhang ZJ. Facile approach in fabricating superhydrophobic SiO2/polymer nanocomposite coating. Appl. Surf. Sci., 2012, 261, 628.

[5]

Leon ACC d, Pernites RB, Advincula RC. Superhydrophobic colloidally textured polythiophene film as superior anticorrosion coating. ACS Appl. Mater. Interfaces, 2012, 4(6): 3169.

[6]

Zheng XM, Zhang QB, Wang J. Fabrication of super-hydrophobic magnetic Fe/SiO2 surface with tunable adhesion inspired by lotus leaf. Micro Nano Lett., 2012, 7(6): 561.

[7]

Song F, Su HL, Han J, Zhang D, Chen ZX. Fabrication and good ethanol sensing of biomorphic SnO2 with architecture hierarchy of butterfly wings. Nanotechnology, 2009, 20(49): 495502.

[8]

Chibowski E, HoŁysz L, Terpilowski K, Jurak M. Investigation of super-hydrophobic effect of PMMA layers with different fillers deposited on glass support. Colloids Surf. A, 2006, 291(1–3): 181.

[9]

Darmanin T, de Givenchy ET, Amigoni S, Guittard F. Superhydrophobic surfaces by electrochemical processes. Adv. Mater., 2013, 25(10): 1378.

[10]

Wang SH, Guo XW, Xie YJ, Liu LH, Yang HY, Zhu RY, Gong J, Peng LM, Ding WJ. Preparation of superhydrophobic silica film on Mg-Nd-Zn-Zr magnesium alloy with enhanced corrosion resistance by combining micro-arc oxidation and sol-gel method. Surf. Coat. Technol., 2012, 213, 192.

[11]

Kim EK, Kim JY, Kim SS. Significant change in water contact angle of electrospray-synthesized SiO2 films depending on their surface morphology. Surf. Interface Anal., 2013, 45(2): 656.

[12]

Liu Y, Yin XM, Zhang JJ, Wang YM, Han ZW, Ren LQ. Biomimetic hydrophobic surface fabricated by chemical etching method from hierarchically structured magnesium alloy substrate. Appl. Surf. Sci., 2013, 280, 845.

[13]

Wang S, Ling YH, Zhao P, Zang NZ, Wang JJ, Guo SB, Zhang J, Xu GY. Bonding tungsten, W-Cu-alloy and copper with amorphous Fe-W alloy transition. Fusion Eng. Des., 2013, 88(4): 248.

[14]

Jia J, Fan JF, Xu BS, Dong HB. Microstructure and properties of the super-hydrophobic films fabricated on magnesium alloys. J. Alloys Compd., 2013, 554, 142.

[15]

Ling YH, Liao JS, Liu XY, Wu XM, Bai XD. Enhanced hydrogen production on porous TiO2 nanotube arrays. J. Nanosci. Nanotechnol., 2010, 10(11): 7020.

[16]

Levine S, Smith AL. Theory of the differential capacity of the oxide/aqueous electrolyte interface. Discuss. Faraday Soc., 1971, 52, 290.

AI Summary AI Mindmap
PDF

136

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/