Effect of rare earth samarium addition on the kinetics of precipitation in Al-Cu-Mn casting alloy

Abstract

The mechanical properties of Al-Cu-Mn casting alloy mainly depend on the morphology, distribution, size, and number of θ′(Al₂Cu) precipitates. In this study, we have analyzed the effect of rare earth samarium (Sm) addition on the kinetics of precipitation in the Al-Cu-Mn casting alloy by using differential scanning calorimetry (DSC) and high-resolution transmission electron microscopy. Thermal effect peaks that are attributed to the formation and the dissolution of Guinier-Preston (GP) zone and θ′ phase were identified from the DSC curves. The activation energy of θ′ formation was calculated by using both the Kissinger method and the analytical model, and the corresponding results were compared. Results suggest that the activation energy of θ′ formation in Al-Cu-Mn alloy is dramatically higher than that in Al-Cu-Mn-Sm alloy. Accordingly, it is concluded that the addition of rare earth Sm decreases the activation energy of θ′ formation and promotes the formation of θ′ precipitates.

Keywords

aluminum copper alloys / rare earth additions / samarium / precipitation / kinetics

References

[1] Lalpoor M, Eskin DG, Katgerman L. Fracture behavior and mechanical properties of high strength aluminum alloys in the as-cast condition. Mater. Sci. Eng. A, 2008, 497(1–2): 186.

[2] Kumar GS V, Murty BS, Chakraborty M. Development of Al-Ti-C grain refiners and study of their grain refining efficiency on Al and Al-7Si alloy. J. Alloys Compd., 2005, 396(1–2): 143.

[3] Bai S, Liu ZY, Li YT, Hou YH, Chen X. Microstructures and fatigue fracture behavior of an Al-Cu-Mg-Ag alloy with addition of rare earth Er. Mater. Sci. Eng. A, 2010, 527(7-8): 1806.

[4] Yao DM, Zhao WG, Zhao HL, Qiu F, Jiang QC. High creep resistance behavior of the casting Al-Cu alloy modified by La. Scripta Mater., 2009, 61(12): 1153.

[5] Yao DM, Bai ZH, Qiu F, Li YJ, Jiang QC. Effects of La on the age hardening behavior and precipitation kinetics in the cast Al-Cu alloy. J. Alloys Compd., 2012, 540, 154.

[6] Chen ZW, Chen P, Li SS. Effect of Ce addition on microstructure of Al20Cu2Mn3 twin phase in an Al-Cu-Mn casting alloy. Mater. Sci. Eng. A, 2012, 532, 606.

[7] Kissinger HE. Reaction kinetics in differential thermal analysis. Anal. Chem., 1957, 29(11): 1702.

[8] Liu F, Sommer F, Mittemeijer EJ. An analytical model for isothermal and isochronal transformation kinetics. J. Mater. Sci., 2004, 39(5): 1621.

[9] Song SJ, Liu F, Jiang YH, Wang HF. Kinetics of solid-state transformation subjected to anisotropic effect: model and application. Acta Mater., 2011, 59(8): 3276.

[10] Liu F, Song SJ, Sommer F, Mittemeijer EJ. Evaluation of the maximum transformation rate for analyzing solid-state phase transformation kinetics. Acta Mater., 2009, 57(20): 6176.

[11] Liu F, Sommer F, Mittemeijer EJ. Determination of nucleation and growth mechanisms of the crystallization of amorphous alloys; application to calorimetric data. Acta Mater., 2004, 52(11): 3207.

[12] Ovono D O, Guillot I, Massinon D. Determination of the activation energy in a cast aluminium alloy by TEM and DSC. J. Alloys Compd., 2007, 432(1-2): 241.

[13] Oguocha INA, Yannacopoulos S. Precipitation and dissolution kinetics in Al-Cu-Mg-Fe-Ni alloy 2618 and Al-alumina particle metal matrix composite. Mater. Sci. Eng. A, 1997, 231(1–2): 25.

[14] Luo A, Lloyd DJ, Gupta A, Youdelis WV. Precipitation and dissolution kinetics in Al-Li-Cu-Mg alloy 8090. Acta Metall. Mater., 1993, 41(3): 769.

[15] Gaber A, Ali A M, Matsuta K, Yamazaki T, Ikeno S. Study of the developed precipitates in Al-0.63Mg-0.37Si-0.5Cu (wt.%) alloy by using DSC and TEM techniques. J. Alloys Compd., 2007, 432(1-2): 149.

[16] Son SK, Takeda M, Mitome M, Bando Y, Endo T. Precipitation behavior of an Al-Cu alloy during isothermal aging at low temperatures. Mater. Lett., 2005, 59(6): 629.

[17] Phillips VA. High resolution electron microscope observations on precipitation in Al-3.0%Cu alloy. Acta Metall., 1975, 23(6): 751.

[18] Chen ZW, Chen P, Ma CY. Microstructures and mechanical properties of Al-Cu-Mn alloy with La and Sm addition. Rare Met., 2012, 31(4): 332.

[19] Starink MJ. Analysis of aluminium based alloys by calorimetry: quantitative analysis of reactions and reaction kinetics. Int. Mater. Rev., 2004, 49(3-4): 191.

[20] Carr MJ. An analysis of fivefold symmetry by microtwinning in rapidly solidified Al-Mn alloys. J. Appl. Phys., 1986, 59(4): 1063.

[21] Ozawa T. Kinetics of non-isothermal crystallization. Polymer, 1971, 12(3): 150.

[22] Chen HS. A method for evaluating viscosities of metallic glasses from the rates of thermal transformations. J. Non Cryst. Solids, 1978, 27(2): 257.

[23] Borchardt HJ. Initial reaction rates from DTA. J. Inorg. Nucl. Chem., 1960, 12(3-4): 252.

[24] Mittemeijer EJ. Analysis of the kinetics of phase transformations. J. Mater. Sci., 1992, 27(15): 3977.

[25] Liu F, Sommer F, Bos C, Mittemeijer EJ. Analysis of solid state phase transformation kinetics: models and recipes. Int. Mater. Rev., 2007, 52(4): 193.