Microstructure and stress rupture properties of polycrystal and directionally solidified castings of nickel-based superalloys

Abstract

A new directionally solidified Ni-based superalloy DZ24, which is a modification of K24 alloy without rare and expensive elemental additions, such as Ta and Hf, was studied in this paper. The microstructure and stress rupture properties of conventionally cast and directionally solidified superalloys were comparatively analyzed. It is indicated that the microstructure of K24 alloy is composed of γ, γ′, γ/γ′ eutectics and MC carbides. Compared with the microstructure of K24 polycrystalline alloy, γ/γ′ eutectic completely dissolves into the γ matrix, the fine and regular γ′ phase reprecipitates, and MC carbides decompose to M₆C/M₂₃C₆ carbides after heat treatment in DZ24 alloy. The rupture life of DZ24 alloy is two times longer than that of K24 alloy. The more homogeneous the size of γ′ precipitate, the longer the rupture life. The coarsening and rafting behaviors of γ′ precipitates are observed in DZ24 alloy after the stress-rupture test.

Keywords

superalloys / nickel alloys / microstructure / precipitation / carbides / mechanical properties

References

[1] Feng Q, Nandy TK, Tin S, Pollock TM. Solidification of high-refractory ruthenium-containing superalloys. Acta Mater., 2003, 51(1): 269.

[2] Jovanović MT, Mišković Z, Lukić B. Microstructure and stress-rupture life of polycrystal, directionally solidified, and single crystal castings of nickel-based IN 939 superalloy. Mater. Charact., 1998, 40(4–5): 261.

[3] Zhou YZ, Volek A. Effect of dendrite arm spacing on castability of a directionally solidified nickel alloy. Scripta Mater., 2007, 56(6): 537.

[4] Zhou YZ, Volek A. Effect of grain boundary fraction on castability of a directionally solidified nickel alloy. Scripta Mater., 2006, 54(12): 2169.

[5] Sheng LY, Wang LJ, Xi TF, Zheng YF, Ye HQ. Microstructure, precipitates and compressive properties of various holmium doped NiAl/Cr(Mo,Hf) eutectic alloys. Mater. Des., 2011, 32(10): 4810.

[6] Liu LR, Jin T, Zhao NR, Wang ZH, Sun XF, Guan HR, Hu ZQ. Effect of carbon addition on the creep properties in a Ni-based single crystal superalloy. Mater. Sci. Eng. A, 2004, 385(1–2): 105.

[7] Fuchs GE. Solution heat treatment response of a third generation single crystal Ni-base superalloy. Mater. Sci. Eng. A, 2001, 300(1–2): 52.

[8] Sun WR, Lee JH, Seo SM, Choe SJ, Hu ZQ. The eutectic characteristic of MC-type carbide precipitation in a DS nickel-base superalloy. Mater. Sci. Eng. A, 1999, 271(1–2): 143.

[9] Chen J, Lee JH, Jo CY, Choe SJ, Lee YT. MC carbide formation in directionally solidified MAR-M247 LC superalloy. Mater. Sci. Eng. A, 1998, 247(1–2): 113.

[10] Yan BC, Zhang J, Lou LH. Effect of boron additions on the microstructure and transverse properties of a directionally solidified superalloy. Mater. Sci. Eng. A, 2008, 474(1–2): 39.

[11] Sims CT, Stoloff NS, Hagel WC. Superalloys II, 1987, New York, Wiley-Interscience, 115

[12] Garosshen TJ, McCarthy GP. Low temperature carbide precipitation in a nickel base superalloy. Metall. Trans. A, 1985, 16(7): 1213.

[13] Liu HS, Zhang L, He XB, Qu XH, Zhu HM, Zhang GQ. Effect of oxygen content and heat treatment on carbide precipitation behavior in PM Ni-base superalloys. Int. J. Miner. Metall. Mater., 2012, 19(9): 827.

[14] Jena AK, Chaturvedi MC. The role of alloying elements in the design of nickel-base superalloys. J. Mater. Sci, 1984, 19(10): 3121.

[15] He LZ, Zheng Q, Sun XF, Guan HR, Hu ZQ, Tieu AK, Lu C, Zhu HT. Effect of heat treatment on microstructures and tensile properties of Ni-base superalloy M963. Mater. Sci. Eng. A, 2005, 398, 128.

[16] Xia PC, Yu JJ, Sun XF, Guan HR, Hu ZQ. The influence of thermal exposure on the microstructure and stress rupture property of DZ951 nickel-base alloy. J. Alloys Compd., 2007, 443(1–2): 125.

[17] Yu JJ, Sun XF, Zhao NR, Jin T, Guan HR, Hu ZQ. Effect of heat treatment on microstructure and stress rupture life of DD32 single crystal Ni-base superalloy. Mater. Sci. Eng. A, 2007, 460–461, 420.

[18] Hino T, Kobayashi T, Koizumi Y, Harada H, Yamagata T. Pollock TM, Kissinger RD, Bowman RR, Green KA, McLean M, Olson S, Schirm JJ. Development of a new single crystal superalloy for industrial gas turbines. Superalloys 2000, 2000, Warrendale, TMS, 729

[19] Shi ZX, Li JR, Liu SZ. Effects of Ru on the microstructure and phase stability of a single crystal superalloy. Int. J. Miner. Metall. Mater., 2012, 19(11): 1004.