Failure analysis of AZ31 magnesium alloy sheets based on the extended GTN damage model

Abstract

Based on the Gurson-Tvergaard-Needleman (GTN) model and Hill’s quadratic anisotropic yield criterion, a combined experimental-numerical study on fracture initiation in the process of thermal stamping of Mg alloy AZ31 sheets was carried out. The aim is to predict the formability of thermal stamping of the Mg alloy sheets at different temperatures. The presented theoretical framework was implemented into a VUMAT subroutine for ABAQUS/EXPLICIT. Internal damage evolution due to void growth and coalescence developed at different temperatures in the Mg alloy sheets was observed by scanning electron microscopy (SEM). Moreover, the thermal effects on the void growth, coalescence, and fracture behavior of the Mg alloy sheets were analyzed by the extended GTN model and forming limit diagrams (FLD). Parameters employed in the GTN model were determined from tensile tests and numerical iterative computation. The distribution of major and minor principal strains in the specimens was determined from the numerical results. Therefore, the corresponding forming limit diagrams at different stress levels and temperatures were drawn. The comparison between the predicted forming limits and the experimental data shows a good agreement.

Keywords

magnesium alloys / failure analysis / microstructure / anisotropy / stamping

References

[1] Chu YJ, Chen J, Li XQ, Wu SQ, Yang ZH. Effects of thermomechanical treatments on the microstructures and mechanical properties of GTA-welded AZ31B magnesium alloy. Int. J. Miner. Metall. Mater., 2012, 19(10): 945.

[2] Neil CJ, Agnew SR. Crystal plasticity-based forming limit prediction for non-cubic metals: application to Mg alloy AZ31B. Int. J. Plast., 2009, 25(3): 379.

[3] Cheng WL, Que ZP, Zhang JS, Xu CX, Liang W, You BS, Park SS. Compressive deformation behavior of an indirect-extruded Mg-8Sn-1Al-1Zn alloy. Int. J. Miner. Metall. Mater., 2013, 20(1): 49.

[4] Zhang QL, Guo HL, Xiao FG, Gao L, Bondarev AB, Han WD. Influence of anisotropy of the magnesium alloy AZ31 sheets on warm negative incremental forming. J. Mater. Process. Technol., 2009, 209(15–16): 5514.

[5] Chen FK, Huang TB, Chang CK. Deep drawing of square cups with magnesium alloy AZ31 sheets. Int. J. Mach. Tools Manuf., 2003, 43(15): 1553.

[6] Palumbo G, Sorgente D, Tricarico L. The design of a formability test in warm conditions for an AZ31 magnesium alloy avoiding friction and strain rate effects. Int. J. Mach. Tools Manuf., 2008, 48(14): 1535.

[7] Lee YS, Kim MC, Kim SW, Kwon YN, Choi SW, Lee JH. Experimental and analytical studies for forming limit of AZ31 alloy on warm sheet metal forming. J. Mater. Process. Technol., 2007, 187–188(12): 103.

[8] Hsiang SH, Lin YW. Application of fuzzy theory to predict deformation behaviors of magnesium alloy sheets under hot extrusion. J. Mater. Process. Technol., 2008, 201(1–3): p.138.

[9] Ji YH, Park JJ. Formability of magnesium AZ31 sheet in the incremental forming at warm temperature. J. Mater. Process. Technol., 2008, 201(1–3): 354.

[10] Gurson AL. Continuum theory of ductile rupture by void nucleation and growth: Part I. Yield criteria and flow rules for porous ductile media. J. Eng. Mater. Technol., 1977, 99(1): 2.

[11] Needleman A, Tvergaard V. An analysis of dynamic, ductile crack growth in a double edge cracked specimen. Int. J. Fract., 1991, 49(1): 41.

[12] Benseddiq N, Imad A. A ductile fracture analysis using a local damage model. Int. J. Pressure Vessels Piping, 2008, 85(4): 219.

[13] Hill R. The Mathematical Theory of Plasticity, 1998, London, Oxford University Press, 355

[14] Somekawa H, Kohzu M, Tanabe S, Higashi K. The press formability in magnesium alloy AZ31. Mater. Sci. Forum, 2000, 350-351, 177.

[15] Zhang KF, Yin DL, Wu DZ. Formability of AZ31 magnesium alloy sheets at warm working conditions. Int. J. Mach. Tools Manuf., 2006, 46(11): 1276.

[16] Chen ZY, Dong XH. The GTN damage model based on Hill’48 anisotropic yield criterion and its application in sheet metal forming. Comput. Mater. Sci., 2009, 44(3): 1013.

[17] Bressan JD. The influence of material defects on the forming ability of sheet metal. J. Mater. Process. Technol., 1997, 72(1): 11.

[18] Chen FK, Huang TB. Formability of stamping magnesium-alloy AZ31 sheets. J. Mater. Process. Technol., 2003, 142(3): 643.