Preparation of metal oxide doped ACNFs and their adsorption performance for low concentration SO₂

Abstract

Metal oxide (TiO₂ or Co₃O₄) doped activated carbon nanofibers (ACNFs) were prepared by electrospinning. These nanofibers were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunner-Emmett-Teller method (BET). The results show that the average diameters of ACNFs were within the range of 200–500 nm, and the lengths were several tens of micrometers. The specific surface areas were 1146.7 m²/g for TiO₂-doped ACNFs and 1238.5 m²/g for Co₃O₄-doped ACNFs, respectively. The electrospun nanofibers were used for adsorption of low concentration sulfur dioxide (SO₂). The results showed that the adsorption rates of these ACNFs increased with an increase in SO₂ concentration. When the SO₂ concentration was 1.0 μg/mL, the adsorption rates of TiO₂-doped ACNFs and Co₃O₄-doped ACNFs were 66.2% and 67.1%, respectively. The adsorption rate also increased as the adsorption time increased. When the adsorption time was 40 min, the adsorption rates were 67.6% and 69.0% for TiO₂-doped ACNFs and Co₃O₄-doped ACNFs, respectively. The adsorption rate decreased as the adsorption temperature increased below 60°C, while it increased as the adsorption temperature increased to more than 60°C.

Keywords

activated carbon nanofibers / metal oxides / electrospinning / adsorption / sulfur dioxide

References

[1] Bradley RH, Rand B. On the physical adsorption of vapors by microporous carbons. J. Colloid Interf. Sci., 1995, 169(1): 168.

[2] Suzuki M. Activated carbon fiber: fundamentals and applications. Carbon, 1994, 32(4): 577.

[3] Mochida I, Korai Y, Shirahama M, Kawano S, Hada T, Seo Y, Yoshikawa M, Yasutake A. Removal of SO_x and NO_x over activated carbon fibers. Carbon, 2000, 38(2): 227.

[4] Huang ZH, Kang FY, Zheng YP, Yang JB, Liang KM. Adsorption of trace polar methy-ethyl-ketone and non-polar benzene vapors on viscose rayon-based activated carbon fibers. Carbon, 2002, 40(8): 1363.

[5] Adapa S, Gaur V, Verma N. Catalytic oxidation of NO by activated carbon fiber (ACF). Chem. Eng. J., 2006, 116(1): 25.

[6] Gaur V, Sharma A, Verma N. Preparation and characterization of ACF for the adsorption of BTX and SO₂. Chem. Eng. Process., 2006, 45(1): 1

[7] Gaur V, Asthana R, Verma N. Removal of SO₂ by activated carbon fibers in the presence of O₂ and H₂O. Carbon, 2006, 44(1): 46.

[8] Gaur V, Sharma A, Verma N. Catalytic oxidation of toluene and m-xylene by activated carbon fiber impregnated with transition metals. Carbon, 2005, 43(15): 3041.

[9] Gaur V, Sharma A, Verma N. Removal of SO₂ by activated carbon fibre impregnated with transition metals. Can. J. Chem. Eng., 2007, 85(2): 188.

[10] Wang JY, Zhao FY, Hu YQ, Zhao RH, Liu RJ. Modification of activated carbon fiber by loading metals and their performance on SO₂ removal. Chin. J. Chem. Eng., 2006, 14(4): 478.

[11] Lu P, Li CT, Zeng GM, He LJ, Peng DL, Cui HF, Li SH, Zhai YB. Low temperature selective catalytic reduction of NO by activated carbon fiber loading lanthanum oxide and ceria. Appl. Catal. B, 2010, 96(1–2): 157

[12] Rathore RS, Srivastava DK, Agarwal AK, Verma N. Development of surface functionalized activated carbon fiber for control of NO and particulate matter. J. Hazard. Mater., 2010, 173(1–3): 211.

[13] Esrafilzadeh D, Morshed M, Tavanai H. An investigation on the stabilization of special polyacrylonitrile nanofibers as carbon or activated carbon nanofiber precursor. Synth. Met., 2009, 159(3–4): 267.

[14] Im JS, Park SJ, Kim T, Lee YS. Hydrogen storage evaluation based on investigations of the catalytic properties of metal/metal oxides in electrospun carbon fibers. Int. J. Hydrogen Energy, 2009, 34(8): 3382.

[15] Zhu J, Holmen A, Chen D. Carbon nanomaterials in catalysis: proton affinity, chemical and electronic properties, and their catalytic consequences. ChemCatChem, 2013, 5(2): 378.

[16] Singhal RM, Sharma A, Verma N. Micro-nano hierarchal web of activated carbon fibers for catalytic gas adsorption and reaction. Ind. Eng. Chem. Res., 2008, 47(10): 3700.

[17] Gupta AK, Deva D, Sharma A, Verma N. Adsorptive removal of fluoride by micro-nanohierarchal web of activated carbon fibers. Ind. Eng. Chem. Res., 2009, 48(21): 9697.

[18] Yang KS, Yoon YJ, Lee MS, Lee WJ, Kim JH. Further carbonization of anisotropic and isotropic pitchbased carbons by microwave irradiation. Carbon, 2002, 40(6): 897.

[19] Cagnon B, Py X, Guillot A, Stoeckli F. The effect of the carbonization/activation procedure on the microporous texture of the subsequent chars and active carbons. Microporous Mesoporous Mater., 2003, 57(3): 273.

[20] Im JS, Park SJ, Kim T, Lee YS. Hydrogen storage evaluation based on investigations of the catalytic properties of metal/metal oxides in electrospun carbon fibers. Int. J. Hydrogen Energy, 2009, 34(8): 3382.

[21] Kim S, Lim SK. Preparation of TiO₂-embedded carbon nanofibers and their photocatalytic activity in the oxidation of gaseous acetaldehyde. Appl. Catal. B, 2008, 84(1–2): 16

[22] Nataraj SK, Kim BH, Yun JH, Lee DH, Aminabhavi TM, Yang KS. Effect of added nickel nitrate on the physical, thermal and morphological characteristics of polyacrylonitrile-based carbon nanofibers. Mater. Sci. Eng. B, 2009, 162(2): 75.

[23] Oya A, Yoshida S, Alcaniz-Monge J, Linares-Solano A. Formation of mesopores in phenolic resin-derived carbon fiber by catalytic activation using cobalt. Carbon, 1995, 33(8): 1085.

[24] Tekmen C, Tsunekawa Y, Nakanishi H. Electrospinning of carbon nanofiber supported Fe/Co/Ni ternary alloy nanoparticles. J. Mater. Process. Technol., 2010, 210(3): 451.

[25] Dwivedi RK, Gowda G. Thermal stability of aluminium oxides prepared from gel. J. Mater. Sci. Lett., 1985, 4(3): 331.

[26] Nowak JD, Carter CB. Forming contacts and grain boundaries between MgO nanoparticles. J. Mater. Sci., 2009, 44(9): 2408.

[27] Oh GY, Ju YW, Jung HR, Lee WJ. Preparation of the novel manganese-embedded PAN-based activated carbon nanofibers by electrospinning and their toluene adsorption. J. Anal. Appl. Pyrol., 2008, 81(2): 211.

[28] Im JS, Kwon O, Kim YH, Park SJ, Lee YS. The effect of embedded vanadium catalyst on activated electrospun CFs for hydrogen storage. Microporous Mesoporous Mater., 2008, 115(3): 514.