Biodegradable starch/poly (vinyl alcohol) film reinforced with titanium dioxide nanoparticles

Abstract

Biodegradable starch/poly (vinyl alcohol)/nano-titanium dioxide (ST/PVA/nano-TiO₂) nanocomposite films were prepared via a solution casting method. Their biodegradability, mechanical properties, and thermal properties were also studied in this paper. A general full factorial experimental approach was used to determine effective parameters on the mechanical properties of the prepared films. ST/PVA/TiO₂ nanocomposites were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results of mechanical analysis show that ST/PVA films with higher contents of PVA have much better mechanical properties. In thermal analysis, it is found that the addition of TiO₂ nanoparticles improves the thermal stability of the films. SEM micrographs, taken from the fracture surface of samples, illustrate that the addition of PVA makes the film softer and more flexible. The results of soil burial biodegradation indicate that the biodegradability of ST/PVA/TiO₂ films strongly depends on the starch proportion in the film matrix. The degradation rate is increased by the addition of starch in the films.

Keywords

nanocomposite films / titanium dioxide / nanoparticles / biodegradability / mechanical properties / thermogravimetric analysis

References

[1] Kim HS, Kim HJ, Lee JW, Choi IG. Biodegradability of bio-flour filled biodegradable poly (butylene succinate) bio-composites in natural and compost soil. Polym. Degrad. Stab., 2006, 91, 1117.

[2] Tang XZ, Alavi S. Recent advances in starch, polyvinyl alcohol based polymer blends, nanocomposites and their biodegradability. Carbohydr. Polym., 2011, 85, 7.

[3] Zhao GH, Liu Y, Fang CL, Zhang M, Zhou CQ, Chen ZD. Water resistance, mechanical properties and biodegradability of methylated-cornstarch/poly(vinyl alcohol) blend film. Polym. Degrad. Stab., 2006, 91, 703.

[4] Jayasekara R, Harding I, Bowater I, Christie GBY, Lonergan GT. Preparation, surface modification and characterisation of solution cast starch PVA blended films. Polym. Test., 2004, 23, 17.

[5] Zhai M, Yoshii F, Kume T. Radiation modification of starch-based plastic sheets. Carbohydr. Polym., 2003, 52, 311.

[6] Ray D, Roy P, Sengupta S, Sengupta SP, Mohanty AK, Misra M. A study of dynamic mechanical and thermal behavior of starch/poly (vinylalcohol) based films. J. Polym. Environ., 2009, 17, 49.

[7] Zhou J, Ma Y, Ren L, Tong J, Liu Z, Xie L. Preparation and characterization of surface crosslinked TPS/PVA blend films. Carbohydr. Polym., 2009, 76, 632.

[8] Yun YH, Yoon SD. Effect of amylose contents of starches on physical properties and biodegradability of starch/PVA-blended films. Polym. Bull., 2010, 64, 553.

[9] Tang SW, Zou P, Xiong HG, Tang HL. Effect of nano-SiO₂ on the performance of starch/polyvinyl alcohol blend films. Carbohydr. Polym., 2008, 72, 521.

[10] Dean KM, Do MD, Petinakis E, Yu L. Key interactions in biodegradable thermoplastic starch/poly (vinyl alcohol)/montmorillonite micro-and nanocomposites. Compos. Sci. Technol., 2008, 68, 1453.

[11] Yoon SD, Park MH, Byun HS. Mechanical and water barrier properties of starch/PVA composite films by adding nano-sized poly (methyl methacrylate-coacrylamide) particles. Carbohydr. Polym., 2012, 87, 676.

[12] Chawengkijwanich C, Hayata Y. Development of TiO₂ powder-coated food packaging film and its ability to inactivate Escherichia coli in vitro and in actual tests. Int. J. Food Microbiol., 2008, 123, 288.

[13] Fujishima A, Rao TN, Tryk DA. Titanium dioxide photocatalysis. J. Photochem. Photobiol. C, 2000, 1, 1.

[14] Zan L, Tian L, Liu ZS, Peng Z. A new polystyrene-TiO₂ nanocomposite film and its photocatalytic degradation. Appl. Catal., A, 2004, 264, 237.

[15] Chung Y, Ansari S, Estevez L, Hayrapetyan S, Giannelis EP, Lai H. Preparation and properties of biodegradable starch-clay nanocomposites. Carbohydr. Polym., 2010, 79, 391.

[16] Standard Test Methods for Tensile Properties of Thin Plastic Sheeting, American Society for Testing and Materials (ASTM), Philadelphia, 2004.

[17] Thakore IM, Desai S, Sarawade BD, Devi S. Studies on biodegradability, morphology and thermomechanical properties of LDPE/modified starch blends. Eur. Polym. J., 2001, 37, 151.

[18] Amin SA, Pazouki M, Hosseinnia A. Synthesis of TiO₂-Ag nanocomposite with sol-gel method and investigation of its antibacterial activity against E. coli.. Powder Technol., 2009, 196, 241.

[19] Zhao R, Torley P, Halley PJ. Emerging biodegradable materials: starch- and protein-based bionanocomposites. J. Mater. Sci., 2008, 43, 3058.

[20] Dai H, Chang PR, Geng F, Yu J, Ma X. Preparation and properties of thermoplastic starch/montmorillonite nanocomposite using N-(2-Hydroxyethyl) formamide as a new additive. J. Polym. Environ., 2009, 17, 225.

[21] Ray D, Roy P, Sengupta S, Sengupta SP, Mohanty AK, Misra M. A study of physicomechanical and morphological properties of starch/poly (vinylalcohol) based films. J. Polym. Environ., 2009, 17, 56.