Preparation and anti atomic oxygen erosion properties of OPPOSS/PI composites

Wei-ping Li , Hui-cong Liu , Li-li Feng

International Journal of Minerals, Metallurgy, and Materials ›› 2013, Vol. 20 ›› Issue (10) : 994 -1000.

PDF
International Journal of Minerals, Metallurgy, and Materials ›› 2013, Vol. 20 ›› Issue (10) : 994 -1000. DOI: 10.1007/s12613-013-0826-0
Article

Preparation and anti atomic oxygen erosion properties of OPPOSS/PI composites

Author information +
History +
PDF

Abstract

Atomic oxygen (AO) found in low earth orbit can cause serious erosion to polyimide (PI) materials, which greatly limits their lifetime. 8-phenyl silsesquioxane (OPPOSS) was synthesized, and OPPOSS/PI composites were prepared by physical blending, followed by thermal imidization to enhance the AO erosion resistance of PI materials. The morphology, composition, and structure of the composites were analyzed before and after AO exposure in a ground simulated facility of atomic oxygen. After 16 h AO exposure, the OPPOSS/PI composite with 5wt% OPPOSS addition shows an erosion rate of about 1.4×10−24 cm3/atom with only 48% mass loss of that of PI without OPPOSS addition. The mixture of OPPOSS nano molecules is assembled into a kind of regular square structure and distributed evenly in OPPOSS/PI composites. Some SiO2 particles are formed in the composites during AO exposure, which can act as “inert points” to reduce the AO erosion rate of OPPOSS/PI composites.

Keywords

composite materials / polyimides / silsesquioxanes / atomic oxygen / erosion

Cite this article

Download citation ▾
Wei-ping Li, Hui-cong Liu, Li-li Feng. Preparation and anti atomic oxygen erosion properties of OPPOSS/PI composites. International Journal of Minerals, Metallurgy, and Materials, 2013, 20(10): 994-1000 DOI:10.1007/s12613-013-0826-0

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Gotoh K, Tagawa M, Ohmae N, Kinoshita H. Surface characterization of atomic oxygen beam-exposed polyimide films using contact angle measurements. Colloid Polym. Sci., 2001, 279(3): 214.

[2]

Zhao W, Li WP, Liu HC, Zhu LQ. Erosion of a polyimide material exposed to simulated atomic oxygen environment. Chin. J. Aeronaut., 2010, 23(2): 268.

[3]

Verker R, Atar N, Quero F, Eichhorn SJ, Grossman E. Tensile stress effect on the macromolecular orientation and erosion mechanism of an atomic oxygen irradiated polyimide. Polym. Degrad. Stab., 2013, 98(5): 997.

[4]

Li GH, Liu X, Li T. Effects of low earth orbit environments on atomic oxygen undercutting of spacecraft polymer films. Compos. Part B, 2013, 44(1): 60.

[5]

Harris IL, Chambers AR, Roberts GT. Preliminary results of an atomic oxygen spaceflight experiment. Mater. Lett., 1997, 31(3–6): 321.

[6]

Dever JA, Bruckner EJ, Rodriguez E. Synergistic Effects of Ultraviolet Radiation, Thermal Cycling and Atomic Oxygen on Altered and Coated Kapton Surfaces, 1992, Cleveland, National Aeronautics and Space Administration (NASA) Lewis Research Center

[7]

Snyder A, Banks BA, Waters DL. Undercutting studies of protected Kapton H exposed to in-space and ground-based atomic oxygen, 2006, Cleveland, National Aeronautics and Space Administration (NASA)

[8]

Li GZ, Wang LC, Ni HL. Polyhedral oligomeric silsesquioxane (POSS) polymers and copolymers: a review. J. Inorg. Organomet. Polym., 2001, 11(3): 123.

[9]

Leu CM, Chang YT, Wei KH. Synthesis and dielectric properties of polyimide-tethered polyhedral oligomeric silsesquioxane (POSS) nanocomposites via POSS-diamine. Macromolecules, 2003, 36(24): 9122.

[10]

Wright ME, Schorzman DA, Feher FJ, Jin RZ. Synthesis and thermal curing of aryl-ethynyl-terminated coPOSS imide oligomers: new inorganic/organic hybrid resins. Chem. Mater., 2003, 15(1): 264.

[11]

Gilman JW, Schlitzer DS, Lichtenhan JD. Low earth orbit resistant siloxane copolymers. J. Appl. Polym. Sci., 1996, 60(4): 591.

[12]

Huang JC, He CB, Xiao Y, Mya KY, Dai J, Siow YP. Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties. Polymer, 2003, 44(16): 4491.

[13]

Zhao W, Li WP, Liu HC, Zhu LQ. Study on the atomic oxygen erosion resistance of poly-γ-aminopropylsiloxane/methylphenylsiliconehybrid films. Int. J. Mod. Phys. B, 2010, 24(15): 3071.

[14]

Ni Y, Zheng SX. A novel photocrosslinkable polyhedral oligomeric silsesquioxane and Its nanocomposites with poly(vinyl cinnamate). Chem. Mater., 2004, 16(24): 5141.

[15]

Tamaki R, Tanaka Y, Asuncion MZ, Choi J, Laine RM. Octa (aminophenyl) silsesquioxane as a nanoconstruction site. J. Am. Chem. Soc., 2001, 123(49): 12416.

[16]

Shen ZG, Zhao XH, Chen J, Wang ZT, Lin SL, Xing YS. Ground-based atomic oxygen effects simulation facility with the filament discharge and bound of magnetic field. Acta Aeronaut. Astronaut. Sin., 2000, 21(5): 425

[17]

Wagner CD, Riggs WM, Moulder JF, Muilenberg GE, Davis LE. Handbook of X-ray photoelectron spectroscopy. Surf. Interface Anal., 1979, 3(4): 190

AI Summary AI Mindmap
PDF

157

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/