Properties of a new type Al/Pb-0.3%Ag alloy composite anode for zinc electrowinning

Abstract

An Al/Pb-0.3%Ag alloy composite anode was produced via composite casting. Its electrocatalytic activity for the oxygen evolution reaction and corrosion resistance was evaluated by anodic polarization curves and accelerated corrosion test, respectively. The microscopic morphologies of the anode section and anodic oxidation layer during accelerated corrosion test were obtained by scanning electron microscopy. It is found that the composite anode (hard anodizing) displays a more compact interfacial combination and a better adhesive strength than plating tin. Compared with industrial Pb-0.3%Ag anodes, the oxygen evolution overpotentials of Al/Pb-0.3%Ag alloy (hard anodizing) and Al/Pb-0.3%Ag alloy (plating tin) at 500 A·m⁻² were lower by 57 and 14 mV, respectively. Furthermore, the corrosion rates of Pb-0.3%Ag alloy, Al/Pb-0.3%Ag alloy (hard anodizing), and Al/Pb-0.3%Ag alloy (plating tin) were 13.977, 9.487, and 11.824 g·m⁻²·h⁻¹, respectively, in accelerated corrosion test for 8 h at 2000 A·m⁻². The anodic oxidation layer of Al/Pb-0.3%Ag alloy (hard anodizing) is more compact than Pb-0.3%Ag alloy and Al/Pb-0.3%Ag alloy (plating tin) after the test.

Keywords

composite anodes / corrosion resistance / oxygen evolution reaction / electrocatalytic activity / zinc electrowinning

References

[1] Bestetti M, Ducati U, Kelsall GH, Guerra E. Use of catalytic anodes for zinc electrowinning at high current densities from purified electrolytes. Can. Metall. Q., 2001, 40(4): 451.

[2] Jha MK, Kumar V, Singh RJ. Review of hydrometallurgical recovery of zinc from industrial wastes. Resour. Conserv. Recycl., 2001, 33(1): 1.

[3] Lai YQ, Jiang LX, Li J, Zhong SP, Lü XJ, Peng HJ, Liu YX. A novel porous Pb-Ag anode for energysaving in zinc electro-winning: Part I. Laboratory preparation and properties. Hydrometallurgy, 2010, 102(1–4): 73.

[4] Rashkov St, Stefanov Y, Noncheva Z, Petrova M, Dobrev Ts, Kunchev N, Petrov D, Vlaev St, Mihnev V, Zarev S, Georgieva L, Buttinelli D. Investigation of the processes of obtaining plastic treatment and electrochemical behaviour of lead alloys in their capacity as anodes during the electroextraction of zinc: II. Electrochemical formation of phase layers on binary Pb-Ag and Pb-Ca, and ternary Pb-Ag-Ca alloys in a sulphuric-acid electrolyte for zinc electroextraction. Hydrometallurgy, 1996, 40(3): 319.

[5] Ivanov I, Stefanov Y, Noncheva Z, Petrova M, Dobrev Ts, Mirkova L, Vermeersch R, Demaerel JP. Insoluble anodes used in hydrometallurgy: Part I. Corrosion resistance of lead and lead alloy anodes. Hydrometallurgy, 2000, 57(2): 109.

[6] Rashkov St, Dobrev Ts, Noncheva Z, Stefanov Y, Rashkova B, Petrova M. Lead-cobalt anodes for electrowinning of zinc from sulphate electrolytes. Hydrometallurgy, 1999, 52(3): 223.

[7] Ni YL, Meng MH, Chen D, Sun DB, Yu HY. Preparation of IrO₂+MnO₂ coating anodes and their application in NaClO production. J. Univ. Sci. Technol. Beijing, 2008, 15(4): 461.

[8] Hu JM, Zhang JQ, Cao CN. Oxygen evolution reaction on IrO₂-based DSA® type electrodes: kinetics analysis of Tafel lines and EIS. Int. J. Hydrogen Energy, 2004, 29(8): 791.

[9] Stefanov Y, Dobrev T. Potentiodynamic and electronmicroscopy investigations of lead-cobalt alloy coated lead composite anodes for zinc electrowinning. Trans. Inst. Met. Finish., 2005, 83(6): 296.

[10] Chen BM, Guo ZC, Huang H, Yang XW, Cao YD. Effect of the current density on electrodepositing alpha-lead dioxide coating on aluminum substrate. Acta Metall. Sin. Engl. Lett., 2009, 22(5): 373.

[11] Song YH, Wei G, Xiong RC. Structure and properties of PbO₂-CeO₂ anodes on stainless steel. Electrochim. Acta, 2007, 52(24): 7022.

[12] Lai YQ, Li Y, Jiang LX, Xu W, Lv XJ, Li J, Liu YX. Electrochemical behaviors of co-deposited Pb/Pb-MnO₂ composite anode in sulfuric acid solution-Tafel and EIS investigations. J. Electroanal. Chem., 2012, 671, 16.

[13] Li Y, Jiang LX, Lv XJ, Lai YQ, Zhang HL, Li J, Liu YX. Oxygen evolution and corrosion behaviors of codeposited Pb/Pb-MnO₂ composite anode for electrowinning of nonferrous metals. Hydrometallurgy, 2011, 109(3–4): 252.

[14] Zhang J, Xiong BW, Wu ZQ. Research on cast-in process of composite hammer. Foundry Technol., 2005, 26(10): 980

[15] Yu JM, Xiao YZ, Wang QJ, Fang XY, Cui GZ. New development of technology of clad metal. Chin. J. Mater. Res., 2000, 14(1): 12

[16] Xu CW, Li Y, Wei SZ, Long R. Study on structure and property of contact surface About electromagnetic double pouring casting rolls. Foundry, 2007, 56(3): 279

[17] Xu RD, Huang LP, Zhou JF, Zhan P, Guan YY, Kong Y. Effects of tungsten carbide on electrochemical properties and microstructural features of Al/Pb-PANIWC composite inert anodes used in zinc electrowinning. Hydrometallurgy, 2012, 125–126, 8.