Microstructural and mechanical properties of Al-4.5wt% Cu reinforced with alumina nanoparticles by stir casting method

Abstract

The microstructure and mechanical properties of Al-4.5wt% Cu alloy reinforced with different volume fractions (1.5vol%, 3vol%, and 5vol%) of alumina nanoparticles, fabricated using stir casting method, were investigated. Calculated amounts of alumina nanoparticles (about ϕ50 nm in size) were ball-milled with aluminum powders in a planetary ball mill for 5 h, and then the packets of milled powders were incorporated into molten Al-4.5wt% Cu alloy. Microstructural studies of the nanocomposites reveal a uniform distribution of alumina nanoparticles in the Al-4.5wt% Cu matrix. The results indicate an outstanding improvement in compression strength and hardness due to the effect of nanoparticle addition. The aging behavior of the composite is also evaluated, indicating that the addition of alumina nanoparticles can accelerate the aging process of the alloy, resulting in higher peak hardness values.

Keywords

metallic matrix composites / nanocomposites / aluminum / alumina / nanoparticles / casting / mechanical properties / microstructure

References

[1] Ahamed H, Senthilkumar V. Experimental investigation on newly developed ultrafne-grained aluminium based nano-composites with improved mechanical properties. Mater. Des., 2012, 37, 182.

[2] Li XC, Yang Y, Weiss D. Theoretical and experimental study on ultrasonic dispersion of nanoparticles for strengthening cast aluminum alloy A356. Metall. Sci. Technol., 2008, 26, 12

[3] Su H, Gao WL, Feng ZH, Lu Z. Processing, microstructure and tensile properties of nano-sized Al₂O₃ particle reinforced aluminum matrix composites. Mater. Des., 2012, 36, 590.

[4] Yang Y, Lan J, Li XC. Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy. Mater. Sci. Eng. A, 2004, 380, 378.

[5] Zhang XN, Geng L, Wang GS. Fabrication of Albased hybrid composites reinforced with SiC whiskers and SiC nanoparticles by squeeze casting. J. Mater. Process. Technol., 2006, 176, 146.

[6] Tjong SC. Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties. Adv. Eng. Mater., 2007, 9, 639.

[7] Chernyshova TA, Kobeleva LI, Kalashnikov IE, Bolotova LK. Modification of cast aluminum-matrix composite materials by refractory nanoparticles. Russ. Metall., 2009, 1, 70.

[8] Zhang XN, Geng L, Wang GS. Microstructure and tensile properties of Al hybrid composites reinforced with SiC whiskers and SiC nanoparticles. Key Eng.Mater., 2003, 249, 277.

[9] Gopalakannan S, Senthilvelan T. EDM of cast Al/SiC metal matrix nanocomposites by applying response surface method. Int. J. Adv. Manuf. Technol., 2013, 67(1–4): 485.

[10] Akbari M K, Baharvandi HR, Mirzaee O. Nano-sized aluminum oxide reinforced commercial casting A356 alloy matrix: evaluation of hardness, wear resistance and compressive strength focusing on particle distribution in aluminum matrix. Compos. Part B, 2013, 52, 262.

[11] Ruiz-Navas EM, Delgado ML, Trindade B. Improvement of the bonding interface of a sintered Al 2014-(Ti₅Si₃)_p composite by the copper coating of the reinforcement. Compos. Part A, 2009, 40, 1283.

[12] Ramu G, Bauri R. Effect of equal channel angular pressing (ECAP) on microstructure and properties of Al-SiC_p composites. Mater. Des., 2009, 30, 3554.

[13] Shorowordi KM, Laoui T, Haseeb ASMA, Celis JP, Froyen L. Microstructure and interface characteristics of B₄C, SiC and Al₂O₃ reinforced Al matrix composites: a comparative study. J. Mater. Process. Technol., 2003, 142, 738.

[14] Abdizadeh H, Baharvandi HR, Moghaddam K S. Comparing the effect of processing temperature on microstructure and mechanical behavior of (ZrSiO₄ or TiB₂)/aluminum composites. Mater. Sci. Eng. A, 2008, 498, 53.

[15] Hashim J, Looney L, Hashmi MSJ. Metal matrix composites: production by the stir casting method. J. Mater. Process. Technol., 1999, 92–93, 1.

[16] Prabu SB, Karunamoorthy L, Kathiresan S, Mohan B. Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite. J. Mater. Process. Technol., 2006, 171, 268.

[17] Kok M. Production and mechanical properties of Al₂O₃ particle-reinforced 2024 aluminium alloy composites. J. Mater. Process. Technol., 2005, 161, 381.

[18] Mazahery A, Abdizadeh H, Baharvandi HR. Development of high-performance A356/nano-Al₂O₃ composites. Mater. Sci. Eng. A, 2009, 518, 61.

[19] Akbari MK, Mirzaee O, Baharvandi HR. Fabrication and study on mechanical properties and fracture behavior of nanometric Al₂O₃ particle-reinforced A356 composites focusing on the parameters of vortex method. Mater. Des., 2013, 46, 199.

[20] Amirkhanlou S, Rezaei MR, Niroumand B, Toroghinejad MR. High-strength and highly-uniform composites produced by compocasting and cold rolling processes. Mater. Des., 2011, 32, 2085.

[21] Ghahremanian M, Niroumand B, Panjepour M. Production of Al-Si-SiC_p cast composites by injection of lowenergy ball-milled Al-SiC_p powder into the melt. Met. Mater. Int., 2012, 18, 149.

[22] Amirkhanlou S, Niroumand B. Synthesis and characterization of 356-SiC_p composites by stir casting and compocasting methods. Trans. Nonferrous Met. Soc. China, 2010, 20, s788.

[23] Amirkhanlou S, Niroumand B. Development of Al356/SiC_p cast composites by injection of SiC_p containing composite powders. Mater. Des., 2011, 32, 1895.

[24] Das S, Das S, Das K. Ageing behavior of Al-4.5wt% Cu matrix alloy reinforced with Al₂O₃ and ZrSiO₄ particulate varying particle size. J. Mater. Sci., 2006, 41, 5402.

[25] Das K, Narnaware LK. Synthesis and characterization of Al-4.5% Cu/Al₃Ti composites: Microstructure and ageing behaviors. Mater. Sci. Eng. A, 2008, 497, 25.

[26] Wei JN, Li ZB, Han FS. Thermal mismatch dis locations in macroscopic graphite particle-reinforced metal matrix composites studied by internal friction. Phys. Status Solidi A, 2002, 191, 125.

[27] Ashutosh. Study of the Age Hardening Behavior of Al-4.5Cu/ZrSiO ₄ Composite in Different Quenching Media [Dissertation], 2007, Patiala, Thapar University, 26