Interfacial intermetallic compound growth and shear strength of low-silver SnAgCuBiNi/Cu lead-free solder joints

Abstract

The growth rule of the interfacial intermetallic compound (IMC) and the degradation of shear strength of Sn-0.8Ag-0.5Cu-2.0Bi-0.05Ni (SACBN)/Cu solder joints were investigated in comparison with Sn-3.0Ag-0.5Cu (SAC305)/Cu solder joints aging at 373, 403, and 438 K. The results show that (Cu_1−x,Ni _x)₆Sn₅ phase forms between the SACBN solder and Cu substrate during soldering. The interfacial IMC thickens constantly with the aging time increasing, and the higher the aging temperature, the faster the IMC layer grows. Compared with the SAC305/Cu couple, the SACBN/Cu couple exhibits a lower layer growth coefficient. The activation energies of IMC growth for SACBN/Cu and SAC305/Cu couples are 111.70 and 82.35 kJ/mol, respectively. In general, the shear strength of aged solder joints declines continuously. However, SACBN/Cu solder joints exhibit a better shear strength than SAC305/Cu solder joints.

Keywords

soldering alloys / soldered joints / aging / intermetallics / activation energy / shear strength

References

[1] Miller CM, Anderson IE, Smith JF. A viable tinlead solder substitute: Sn-Ag-Cu. J. Electron. Mater., 1994, 23(7): 595.

[2] Alam MO, Chan YC, Tu KN. Effect of 0.5 wt% Cu addition in Sn-3.5%Ag solder on the dissolution rate of Cu metallization. J. Appl. Phys., 2003, 94(12): 7904.

[3] Liu B, Guo F. Electrical conductivity changes of bulk tin and Sn-3.0Ag-0.5Cu in bulk and in joints during isothermal aging. Int. J. Miner. Metall. Mater., 2010, 17(4): 453.

[4] Chiang HW, Chang K, Chen JY. The effect of Ag content on the formation of Ag3Sn plates in Sn-Ag-Cu leadfree solder. J. Electron. Mater., 2006, 35(12): 2074.

[5] Kim KS, Huh SH, Suganuma K. Effects of cooling speed on microstructure and tensile properties of Sn-Ag-Cu alloys. Mater. Sci. Eng. A, 2002, 333(1–2): 106

[6] Wei GQ, Wan ZH, Zhao SY, Zhang YP, Liu FM. Investigations on melting property, wettability and mechanical property of Sn-XAg-0.5Cu lead-free solder alloys. J. Mater. Eng., 2010 53

[7] Wan ZH, Wei GQ. Effects of Bi on melting characteristics and wettability of Sn-0.8Ag-0.5Cu lead free solder alloy. Hot Work Technol., 2010, 39(17): 146

[8] Wan ZH, Wei GQ, Shi L, Zhang YP. Analysis on wettability and dissolution behavior of low Ag SnAgCu-BiNi lead-free solder alloys. Trans. China Weld. Inst., 2011, 32(10): 89

[9] Wei GQ, Wan ZH, Xue MY, Wang L. Investigation on microstructures and properties of low Ag content lead-free solder alloy. ICEPT-HDP2011, 2011 1

[10] Kim KS, Huh SH, Suganuma K. Effects of intermetallic compounds on properties of Sn-Ag-Cu lead-free soldered joints. J. Alloys. Compd., 2003, 352(1–2): 226.

[11] Nogita K. Stabilisation of Cu₆Sn₅ by Ni in Sn-0.7Cu-0.05Ni lead-free solder alloys. Intermetallics, 2010, 18(1): 145.

[12] Nishikawa H, Piao JY, Takemoto T. Interfacial reaction between Sn-0.7Cu(-Ni) solder and Cu substrate. J. Electron. Mater., 2006, 35(5): 1127.

[13] Wu YJ, Sees JA, Pouraghabagher C, Foster LA, Marshall JL, Jacobs EG, Pinizzotto RF. The formation and growth of intermetallics in composite solder. J. Electron. Mater., 1993, 22(7): 769.

[14] Yoon JW, Noh BI, Kim BK, Shur CC, Jung SB. Wettability and interfacial reactions of Sn-Ag-Cu/Cu and Sn-Ag-Ni/Cu solder joints. J. Alloys Compd., 2009, 486(1–2): 142.

[15] Kim YM, Roh HR, Kim S, Kim YH. Kinetics of intermetallic compound formation at the interface between Sn-3.0Ag-0.5Cu solder and Cu-Zn alloy substrates. J. Electron. Mater., 2010, 39(12): 2504.

[16] Laurila T, Vuorinen V, Paulasto-Kröckel M. Impurity and alloying effects on interfacial reaction layers in Pb-free soldering. Mater. Sci. Eng. R, 2010, 68(1–2): 1.

[17] Dong MJ, Gao ZM, Liu YC, Wang X, Yu LM. Effect of indium addition on the microstructural formation and soldered interfaces of Sn-2.5Bi-1Zn-0.3Ag lead-free solder. Int. J. Miner. Metall. Mater., 2012, 19(11): 1029.

[18] Nai SML, Wei J, Gupta M. Interfacial intermetallic growth and shear strength of lead-free composite solder joints. J. Alloys Compd., 2009, 473(1–2): 100.

[19] Deng X, Sidhu RS, Johnson P, Chawla N. Influence of reflow and thermal aging on the shear strength and fracture behavior of Sn-3.5Ag solder/Cu joints. Metall. Mater. Trans. A, 2005, 36(1): 55.