Effect of modifying agents on the hydrophobicity and yield of zinc borate synthesized by zinc oxide

Abstract

The aim of this study was to synthesize zinc borate using zinc oxide, reference boric acid, and reference zinc borate (reference ZB) as the seed, and to investigate the effects of modifying agents and reaction parameters on the hydrophobicity and yield, respectively. The reaction parameters include reaction time (1–5 h), reactant ratio (H₃BO₃/ZnO by mass: 2–5), seed ratio (seed crystal/(H₃BO₃+ZnO) by mass: 0–2wt%), reaction temperature (50–120°C), cooling temperature (10–80°C), and stirring rate (400–700 r/min); the modifying agents involve propylene glycol (PG, 0–6wt%), kerosene (1wt%–6wt%), and oleic acid (OA, 1wt%–6wt%) with solvents (isopropyl alcohol (IPA), ethanol, and methanol). The results of reaction yield obtained from either magnetically or mechanically stirred systems were compared. Zinc borate produced was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and contact angle tests to identify the hydrophobicity. In conclusion, zinc borate is synthesized successfully under the optimized reaction conditions, and the different modifying agents with various solvents affect the hydrophobicity of zinc borate.

Keywords

zinc borate / zinc oxide / hydrophobicity / yield

References

[1] Shete AV, Sawant SB, Pangarkar VG. Kinetics of fluid-solid reaction with an insoluble product: zinc borate by the reaction of boric acid and zinc oxide. J. Chem. Technol. Biotechnol., 2004, 79(5): 526.

[2] H. Sawada, H. Igarashi, A. Tatebe, and K. Sakao, Zinc Borate, and Production Method and Use Thereof, US Patent, Appl. 6780913 B2, 2004.

[3] Igarashi H, Sakao K, Sawada H, Tatebe A. Zinc Borate, and Production Method and Use Thereof, 2002

[4] Chang JB, Yan PX, Yang Q. Formation of borate zinc (ZnB₄O₇) nanotubes. J. Cryst. Growth, 2006, 286(1): 184.

[5] Eltepe HE, Balköse D, Ülkü S. Effect of temperature and time on zinc borate species formed from zinc oxide and boric acid in aqueous medium. Ind. Eng. Chem. Res., 2007, 46(8): 2367.

[6] Gürhan D, Çakal G Ö, Eroǧlu Özkar S. Improved synthesis of fine zinc borate particles using seed crystals. J. Cryst. Growth, 2009, 311, 1545.

[7] Tian YM, He Y, Yu LX, Deng YH, Zheng YH, Sun F, Liu ZH, Wang ZC. In situ and one-step synthesis of hydrophobic zinc borate nanoplatelets. Colloids Surf. A, 2008, 312(2-3): 99.

[8] Schubert DM, Alam F, Visi MZ, Knobler CB. Structural characterization and chemistry of the industrially important zinc borate Zn[B₃O₄(OH)₃]. Chem. Mater., 2003, 15, 866.

[9] Shi X, Xiao Y, Li M, Yuan L, Sun J. Synthesis of an industrially important zinc borate, 2ZnO·3B₂O₃·3H₂O, by a rheological phase reaction method. Powder Technol., 2008, 186(3): 263.

[10] Genovese A, Shanks RA. Structural and thermal interpretation of the synergy and interactions between the fire retardants magnesium hydroxide and zinc borate. Polym. Degrad. Stab., 2007, 92(1): 2.

[11] Yıldız B, Seydibeyoǧlu M Ö, Güner FS. Polyurethane-zinc borate composites with high oxidative stability and flame retardancy. Polym. Degrad. Stab., 2009, 94(7): 1072.

[12] Giúdice CA, Benítez JC. Zinc borates as flameretardant pigments in chlorine-containing coatings. Prog. Org. Coat., 2001, 42(1–2): 82.

[13] Gaafar MS, El-Aal NS A, Gerges OW, Amir G E-. Elastic properties and structural studies on some zinc-borate glasses derived from ultrasonic, FT-IR and X-ray techniques. J. Alloys Compd., 2009, 475(1–2): 535.

[14] Garba B. Effect of zinc borate as flame retardant formulation on some tropical woods. Polym. Degrad. Stab., 1999, 64(3): 517.

[15] Li SL, Long BH, Wang ZC, Tian YM, Zheng YH, Zhang Q. Synthesis of hydrophobic zinc borate nanoflakes and its effect on flame retardant properties of polyethylene. J. Solid State Chem., 2010, 183(4): 957.

[16] Tian YM, Guo YP, Jiang M, Sheng Y, Hari B, Zhang GY, Jiang YQ, Zhou B, Zhu YC, Wang ZC. Synthesis of hydrophobic zinc borate nanodiscs for lubrication. Mater. Lett., 2006, 60, 2511.

[17] Chen T, Deng JC, Wang LS, Feng G. Preparation and characterization of nano-zinc borate by a new method. J. Mater. Process. Technol., 2009, 209, 4076.

[18] Shi XX, Xiao Y, Yuan LJ, Sun JJ. Hydrothermal synthesis and characterizations of 2D and 3D 4ZnO·B₂O₃·H₂O nano/microstructures with different morphologies. Powder Technol., 2009, 189(3): 462.

[19] Köytepe S, Vural S, Seçkin T. Molecular design of nanometric zinc borate-containing polyimide as a route to flame retardant materials. Mater. Res. Bull., 2009, 44, 369.

[20] Shi XX, Li M, Yang H, Chen SP, Yuan LJ, Zhang KL, Sun JT. PEG-300 assisted hydrothermal synthesis of 4ZnO·B₂O₃·H₂O nanorods. Mater. Res. Bull., 2007, 42, 1649.

[21] Chen XA, Zhao YH, Chang XN, Zuo JL, Zang HG, Xiao WQ. Syntheses and crystal structures of two new hydrated borates, Zn₈[(BO₃)₃O₂(OH)₃] and Pb[B₅O₈(OH)]·1.5H₂O. J. Solid State Chem., 2006, 179, 3911.

[22] Zheng YH, Tian YM, Ma HL, Qu YN, Wang ZC, An DM, Guan S, Gao XY. Synthesis and performance study of zinc borate nanowhiskers. Colloids Surf. A, 2009, 339, 178.

[23] Ata ON, Şyan E, Engin B. Optimization and modeling of zinc borate (2ZnO·3B₂O₃·3.5H₂O) production with the reaction of boric acid and zinc oxide. J. Ind. Eng. Chem., 2011, 17, 493.

[24] Kılınç M, Çakal G Ö, Yeşil S, Bayram G, Eroǧlu Özkar S. Scale-up synthesis of zinc borate from the reaction of zinc oxide and boric acid in aqueous medium. J. Cryst. Growth, 2010, 312, 3361.

[25] Gönen M, Balköse D, Ülkü S. Supercritical ethanol drying of zinc borates of 2ZnO·3B₂O₃·3H₂O and ZnO·B₂O₃·2H₂O. J. Supercrit. Fluid., 2011, 59, 43.

[26] Piskin S, Acarali NB, Derun EM, Tugrul N. Investigation of reaction conditions effecting hydrophobicity on zinc borate yield. TMS Annual Meeting, 2011 379.