Thermodynamic analysis and formula optimization of steel slag-based ceramic materials by FACTsage software

Abstract

Using steel slag as a main raw material of ceramics is considered as a high value-added way. However, the relationship among the initial composition, ceramic microstructure, and macroscopic properties requires further study. In this paper, a series of ceramics with different slag ratios (0–70wt%) were designed, and the software FACTsage was introduced to simulate the formation of crystalline phases. The simulation results indicate that mullite is generated but drastically reduced at the slag ratios of 0–25wt%, and anorthite is the dominant crystalline phase in the slag content of 25wt%-45wt%. When the slag ratio is above 45wt%, pyroxene is generated more than anorthite. This is because increasing magnesium can promote the formation of pyroxene. Then, the formula with a slag content of 40wt% was selected and optimized. X-ray diffraction results were good consistent with the simulation results. Finally, the water absorption and bending strength of optimized samples were measured.

Keywords

ceramic materials / steel slag / phase composition / thermodynamics / optimization

References

[1] Li CH. Study on the development and prospect of recy cling technology of steel slag in China. WISCO Technol., 2010, 48(4): 51.

[2] Agarwal G, Hong KS, Fletcher MR, Speyer RF. Crystallization behavior of cupola slag glass-ceramics. J. Non Cryst. Solids, 1991, 130(2): 187.

[3] Ferreira EB, Zanotto ED, Scudeller LAM. Glass and glass-ceramic from basic oxygen furnace (BOF) slag. Glass Sci. Technol., 2002, 75(2): 75.

[4] Cheng JS, Tang LY, Wang Q. Investigation of a slag glass-ceramics. J. Wuhan Univ. Technol., 1995, 17(4): 1.

[5] Xiao HN, Deng ChM, Peng WQ. Effects of processing conditions on the microstructures of glass-ceramics prepared from iron and steel slag. J. Hunan Univ. Nat. Sci., 2001, 28(1): 32.

[6] Badiee H, Maghsoudipour A, Dehkordi BR. Use of Iranian steel slag for production of ceramic floor tiles. Adv. Appl. Ceram., 2008, 107(2): 111.

[7] Zong YB, Li Y, Cang DQ. Experimental study on stainless steel slag used in ceramic making. Adv. Mater. Res., 2010, 105–106(1): 758.

[8] Bai H, Liu P, Ai XB, Zhao LH, Tang Q, Zheng SL. Analysis on the microstructure characteristics of steel-slag based ceramics. Adv. Mater. Res., 2011, 150–151, 133.

[9] Bale CW, Bélisle E, Chartrand P, Decterov SA, Eriksson G, Hack K, Jung IH, Kang YB, Melançon J, Pelton AD, Robelin C, Petersen S. FACTsage thermochemical software and databases-recent developments. Calphad, 2009, 32(2): 295.

[10] Srikanth S, Ray AK, Bandopadhyay A, Ravikumar B, Jha A. Phase constitution during sintering of red mud and red mud-fly ash mixtures. J. Am. Ceram. Soc., 2005, 88(9): 2396.

[11] Pontikes Y, Rathossi C, Nikolopoulos P, Angelopoulos GN, Jayaseelan DD, Lee WE. Effect of firing temperature and atmosphere on sintering of ceramics made from Bayer process bauxite residue. Ceram. Int., 2009, 35(1): 401.

[12] Kowalski M, Spencer PJ, Neuschütz D. SLAG ATLAS: Phase Diagrams, 1995 2nd Ed. GmbH D-Düsseldorf, Verlag Stahleisen, 160.

[13] Li JJ. Ceramic Technology, 2008, Beijing, China Light Industry Press, 213.

[14] Chen YF, Wang MC, Hon MH. Phase transformation and growth of mullite in kaolin ceramics. J. Eur. Ceram. Soc., 2004, 24(8): 2389.

[15] Zhao LH, Cang DQ, Liu P, Bai H, Tang Q. Preparation and microstructure analysis of CaO-MgO-SiO₂ steel-slag ceramics. J. Univ. Sci. Technol. Beijing, 2011, 33(8): 995.

[16] Karamanova E, Avdeev G, Karamanov A. Ceramics from blast furnace slag, kaolin and quartz. J. Eur. Ceram. Soc., 2011, 31(6): 989.