Undersea safety mining of the large gold deposit in Xinli District of Sanshandao Gold Mine

Abstract

The exploration of undersea resources becomes popular as land resources decrease. Researches were conducted with emphasis on the safety and efficiency of undersea mining of the large gold deposit in Xinli District of Sanshandao Gold Mine. A series of tests for the physical and mechanical characteristics of rock mass were carried out, and the three-dimensional geo-stress distribution was tested in the mining area. Further, a similar experimental simulation platform, which revealed the mechanism of water inrush and ascertained the reasonable thickness of the safety isolate layer, was established for the undersea mining. Meanwhile, the feasibility of cancelling the ore pillars and the safety conditions was checked by numerical simulation. The simulation results show that it is safe to exploit the ore body below the −85 m level (presently, the exploitation level is below −160 m in Xinli District), and the ore pillars can be cancelled below the −560 m level. Furthermore, a novel backfill method was designed to reduce the rock strata disturbance and settlement, and the settlement of roof strata was monitored during the mining process. Engineering practice shows that the settlement of roof strata was small and that no disaster happened. This indicates that the undersea safety mining technology of the large gold deposit is achieved in Xinli District.

Keywords

undersea mining / gold deposits / rock mechanics / mine roof control / computer simulation

References

[1] Manheim F.T. Marine cobalt resources. Science, 1986, 232(4750): 600

[2] Rona P.A. Resources of the sea floor. Science, 2003, 299(5607): 673

[3] R.F. Commeau, A. Clark, C. Johnson, F.T. Manheim, P.J. Aruscavage, and C.M. Lane, Ferromanganese crust resources in the Pacific and Atlantic Oceans, [in] Oceans Conference (IEEE), 1984, p.421.

[4] Chung J.S. Deep-ocean mining: technologies for manganese nodules and crusts. Int. J. Offshore Polar Eng., 1996, 6(4): 244.

[5] Chung J.S., Tsurusaki K. Advance in deep-ocean mining systems research. Int. J. Offshore Polar Eng., 1994, 1, 18.

[6] R.M. Thompson and K.G. Smith, Undersea lode mining in Alaska, [in] Offshore Technology Conference, Houston, 1970, p.22.

[7] Watson H.F. Undersea coal mining in north east England. Light Met. Age, 1979, 3, 1.

[8] Zhao G.Y. Study on the safety mining technology of seabed hard rock. Chin. Saf. Sci. J., 2009, 19(5): 159.

[9] Li W. Extraction technology of ocean mining. Chin. Min. Mag., 2003, 12(1): 44.

[10] Liu Z.X., Liu C., Liu Q., Yue Y.L. Chaotic time series reconstruction and security alarm system of rock mass deformation in undersea mining. J. Geotech. Eng., 2010, 32(10): 1530.

[11] R.J. Orchard, Control of ground movements in undersea working, Min. Eng., 1969, No.101, p.259.

[12] Aston T.R.C., Whittaker B.N. Undersea longwall mining subsidence with special reference to geological and water occurrence criteria in the north-east of England coalfield. Min. Sci. Technol., 1985, 2(2): 105

[13] Andrews J. Quantitative safety assessment of the ventilation recirculation system in an undersea mine. Qual. Reliab. Eng. Int., 1991, 7(6): 497

[14] Gu D.S., Li X.B. Modern Mining Science and Technology for Metal Mineral Resources, 2006, Beijing, Metallurgical Industry Press

[15] Yan X.M., Li X.B., Guo L., Gao F. Stability of boundary pillar of open pit and underground mine. Rock Soil Mech., 2007, 28(8): 1682.

[16] Li Y.H., Nan S.Q., Zhao X.D., Yang T.H., Tang C.A., Zhang Y.B., Tan Z.H. Stability of boundary pillars for transition from open pit to underground mining. Chin. J. Rock Mech. Eng., 2005, 24(2): 278.

[17] Chen S.Q., Huang R.Q. A study on safety thickness of shallow buried cavities under foundation. Chin. J. Rock Mech. Eng., 2000, 19(Suppl.): 961.

[18] Qiao L., Ouyang Z.H., Lai X.P., Miao S.J. In-situ stress measuring and its result analysis in Sanshandao gold mine of China. J. Univ. Sci. Technol. Beijing (in Chinese), 2004, 26(6): 569.

[19] Tan Z.Y., Cai M.F. Measurement and study of the distributing law of in-situ stresses in rock mass at great depth. J. Univ. Sci. Technol. Beijing, 2006, 13(3): 207

[20] Wang J.A., Li D.Z., Shang X.C. Mechanics analysis on creep fracture of strong roof strata above mined-out area. J. Univ. Sci. Technol. Beijing, 2011, 33(2): 142.

[21] Li X.Y., Li J.P., Zhou C.B., Xiang W.F. Comparative study on numerical simulation and similarity simulation of overburden deformation in abandoned stope. Rock Soil Mech., 2005, 26(12): 1907.

[22] Wang X.B. Numerical simulation of formation process at and snap-back for a fault band and elastic rock system. J. Univ. Sci. Technol. Beijing, 2006, 28(3): 211.

[23] Liu S.J., Lin B.Q., Gao J., Hao Z.Y., Li Q.G., Meng J. Similar simulation of fracture deformation in overlying coal and rock in Far-Distance-Lower-Protective-Layer mining. J. Min. Saf. Eng., 2011, 28(1): 51.

[24] Peila D., Guardini C., Pelizza S. Geomechanical design of a room and rib pillar granite mine. J. Univ. Sci. Technol. Beijing, 2008, 15(2): 97

[25] Hoke E., Brown E.T. Underground Excavation in Rock, 1980, London, Institution of Mining and Metallurgy Press

[26] Xu C.Y. Opencast to Underground Mining, 1990, Wuhan, Wuhan University of Technology Press

[27] Cai M.F., He M.C., Liu D.Y. Rock Mechanics & Engineering, 2002, Beijing, Science Press

[28] Liu G.T., Ye Y.X., Xu Z.H. Development of testing machine for coupled seepage and triaxial stress measurements in rocks. J. Tsinghua Univ. Sci. Technol., 2007, 47(3): 323.

[29] Zheng H., Li C.G., Lee C.F., Ge X.R. Finite element method for solving the factor of safety. Chin. J. Geotech. Eng., 2002, 24(5): 626.

[30] Li S.C., Li S.C., Xu B.S. Minimum safety factor method for stability analysis of surrounding rockmass of tunnel. Rock Soil Mech., 2007, 28(3): 549.

[31] Xiong J., Zhang J.H. Correlation analysis of relationship between Druker-Prager yield criteria and strength margin safety factor. Rock Soil Mech., 2008, 29(7): 1905.